The papers within this volume reflect the multidisciplinary approach taken by the workshop to the development and improvement of existing production control theories and practices as applied to the process industry. Subjects covered include production planning, quality control and assurance, operational control and maintenance strategy. The development of this area is seen by those at the workshop as only being achieved by various groups working together rather than in isolation, so that the overall aim of production control is not lost in too much detail. This volume will provide the reader with essential information on new initiatives in the process industry with regard to production control.

Growing numbers of engineering graduates are finding employment in the control systems area with applications to manufacturing. To be properly prepared for such positions, it is desirable that the students be exposed to the topics of process control, discrete logic control and the fundamentals of manufacturing. Presently there is no existing textbook and/or reference that combine together process control, discrete logic control and the fundamentals of manufacturing. This is a book that fills that gap. This book integrates together the theory with a number of illustrative examples. Constructive procedures will be given for designing controllers and manufacturing lines, including methods for designing digital controllers, fuzzy logic controllers and adaptive controllers, and methods for the design of the flow of operations in a manufacturing line. One chapter will be devoted to equipment interfacing and computer communications, with the focus on fieldbuses, device drivers and computer networks. There are no existing control-oriented textbooks that bring this material into the picture, although interfacing and communications are becoming a bigger and bigger part of the overall control problem. - Covers both analog and digital control using P/PI/PID controllers and discrete logic control using ladder logic diagrams and programmable logic controllers - Contains a brief introduction to model predictive control, adaptive control, and neural net control - Covers control from the device/process level up to and including the production system level - Contains an introduction to manufacturing systems with the emphasis on performance measures, flow-line analysis, and line balancing - Contains a chapter on equipment interfacing with a brief introduction on OLE for process control (OPC), the GEM standard, fieldbuses, and Ethernet - Material is based on a course with a lab project developed and taught at the Georgia Institute of Technology - Coverage is at the introductory level with a minimal amount of background required to read the text

Over the last fifty-plus years, the increased complexity and speed of integrated circuits have radically changed our world. Today, semiconductor manufacturing is perhaps the most important segment of the global manufacturing sector. As the semiconductor industry has become more competitive, improving planning and control has become a key factor for business success. This book is devoted to production planning and control problems in semiconductor wafer fabrication facilities. It is the first book that takes a comprehensive look at the role of modeling, analysis, and related information systems for such manufacturing systems. The book provides an operations research- and computer science-based introduction into this important field of semiconductor manufacturing-related research.

Complex raw materials and manufacturing processes mean the textile industry is particularly dependent on good process control to produce high and consistent product quality. Monitoring and controlling process variables during the textile manufacturing process also minimises waste, costs and environmental impact. Process control in textile manufacturing provides an important overview of the fundamentals and applications of process control methods.Part one introduces key issues associated with process control and principles of control systems in textile manufacturing. Testing and statistical quality control are also discussed before part two goes on to consider control in fibre production and yarn manufacture. Chapters review process and quality control in natural and synthetic textile fibre cultivation, blowroom, carding, drawing and combing. Process control in ring and rotor spinning and maintenance of yarn spinning machines are also discussed. Finally part three explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a final discussion of process control in apparel manufacturing.With its distinguished editors and international team of expert contributors, Process control in textile manufacturing is an essential guide for textile engineers and manufacturers involved in the processing of textiles, as well as academic researchers in this field. - Provides an important overview of the fundamentals and applications of process control methods - Discusses key issues associated with process control and principles of control systems in textile manufacturing, before addressing testing and statistical quality control - Explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a discussion on process control in apparel manufacturing

Introduction to Business covers the scope and sequence of most introductory business courses. The book provides detailed explanations in the context of core themes such as customer satisfaction, ethics, entrepreneurship, global business, and managing change. Introduction to Business includes hundreds of current business examples from a range of industries and geographic locations, which feature a variety of individuals. The outcome is a balanced approach to the theory and application of business concepts, with attention to the knowledge and skills necessary for student success in this course and beyond. This is an adaptation of Introduction to Business by OpenStax. You can access the textbook as pdf for free at openstax.org. Minor editorial changes were made to ensure a better ebook reading experience. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution 4.0 International License.

This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Based on both the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2019 International Conference on Advanced Production Management and Process Control, held on July 24-28, 2019, in Washington D.C., USA, this book also highlight important strategies for managing enterprise of the future.

Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study. - Uses practical examples from the industry to clearly illustrate the concepts presented - Provides a basic overview of statistics to accompany the introduction to forecasting - Covers the relevance of PP&C to key emerging themes in manufacturing technology, including the Industrial Internet of Things and Industry 4

This book presents a number of efficient techniques for solving large-scale production scheduling and planning problems in process industries. The main content is supplemented by a wealth of illustrations, while case studies on large-scale industrial applications, ranging from continuous to semicontinuous and batch processes, round out the coverage. The book examines a variety of complex, real-world problems, and demonstrates solutions that are applicable to scenarios and countries around the world. Specifically, these case studies include: • the production planning of the bottling stage of a major brewery at the Cervecería Cuauhtémoc Moctezuma (Heineken Int) in Mexico;• the production scheduling for multi-stage semicontinuous processes at an ice-cream production facility of Unilever in the Netherlands;• the resource-constrained production planning for the yogurt production line at the KRI KRI dairy production facility in Greece; and• the production scheduling for large-scale, multi-stage batch processes at a pharmaceutical batch plant in Germany. In addition, the book includes industrial-inspired case studies of: • the simultaneous planning of production and logistics operations considering multi-site facilities for semicontinuous processes; and• the integrated planning of production and utility systems in process industries under uncertainty. Solving Large-scale Production Scheduling and Planning in the Process Industries offers a valuable reference guide for researchers and decision-makers alike, as it shows readers how to evaluate and improve existing installations, and how to design new ones. It is also well suited as a textbook for advanced courses on production scheduling and planning in industry, as it addresses the optimization of production and logistics operations in real-world process industries.

This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.