Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990’s as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication. A perfect design companion for practicing engineers, this book provides full design examples from literature, along with detailed illustrations for the various antenna geometries. This resource overviews the various applications that currently depend on printed MIMO antennas, and provides design guidelines and remarks throughout the book for guidance.

The desired objective of the book is to investigate diversity and mutual coupling effects on MIMO antenna designs for WLAN/WiMAX/LTE applications, controlled with diversity and ground modification techniques including equivalent circuit diagrams. The improved MIMO antenna structures and massive MIMO are covered to illustrate the technology.

The desired objective of this book is to investigate diversity and mutual coupling effects on MIMO antenna designs for WLAN/WiMAX/LTE applications, controlled with diversity and ground modification techniques including equivalent circuit diagrams. Diversity techniques in MIMO antennas leading to the performance improvement ratings are demonstrated and deliberated. The book contributes towards the development of 2:1 VSWR MIMO antennas with diversity techniques for indoor/outdoor applications for high data rate, QOS, and SNR. The improved MIMO antenna structures are investigated and presented in this book including part of massive MIMO to provide the important aspects of emerging technology. Aimed at researchers, professionals and graduate students in electrical engineering, electromagnetics, communications and signal processing including antenna theory and design, smart antennas, communication systems, this book: Investigates real time MIMO antenna designs for WLAN/WiMAX/LTE applications. Covers effects of ECC, MEG, TARC, and equivalent circuit. Addresses the coupling and diversity aspects of antenna design problem for MIMO systems. Focus on the MIMO antenna designs for the real time applications. Exclusive chapter on 5G Massive MIMO along with case studies throughout the book.

This book discusses the development of promising technologies for compact antennas for high data-rate communications. It discusses and analyzes the design of compact ultra-wideband (UWB) and multiple input, multiple output (MIMO) antennas, providing essential know-how for designers, practicing engineers and scientists. These wireless communication technologies enable consumers to have convenient access to a wide range of services – anytime, anywhere. And the introduction of wireless mobile access points eliminates the limitations to communication imposed by geographical location. The Internet has allowed people to access and share information much more rapidly, but in order to achieve higher data rates with the limited available resources and imposed constraints, wireless communication technology needs to be pushed beyond the physical limits of the propagation channel. This book contributes to achieving this goal.

This comprehensive resource presents antenna fundamentals balanced with the design of printed antennas. Over 70 antenna projects, along with design dimensions, design flows and antenna performance results are discussed, including antennas for wireless communication, 5G antennas and beamforming. Examples of smartphone antennas, MIMO antennas, aerospace and satellite remote sensing array antennas, automotive antennas and radar systems and many more printed antennas for various applications are also included. These projects include design dimensions and parameters that incorporate the various techniques used by industries and academia. This book is intended to serve as a practical microstrip and printed antenna design guide to cover various real-world applications. All Antenna projects discussed in this book are designed, analyzed and simulated using full-wave electromagnetic solvers. Based on several years of the author’s research in antenna design and development for RF and microwave applications, this book offers an in-depth coverage of practical printed antenna design methodology for modern applications.

Printed antennas, also known as microstrip antennas, have a variety of beneficial properties including mechanical durability, conformability, compactness and cheap manufacturing costs. As such, they have a range of applications in both the military and commercial sectors, and are often mounted on the exterior of aircraft and spacecraft as well as incorporated into mobile radio communication devices. Printed Antennas for Wireless Communications offers a practical guide to state-of-the-art printed antenna technology used for wireless systems. Contributions from renowned global experts within both academia and industry enable the reader to design printed antennas and associated technologies, and offer valuable insights into important breakthroughs in these areas. Divided into 3 sections covering fundamental wideband printed radiating elements for wireless systems, small printed antennas for wireless systems, and advanced concepts and applications in wireless systems. Provides experimental data and applies theoretical models to present design performance trends and to give the reader an in-depth coverage of the area. Presents summaries of different approaches used in solving wireless systems such as WPAN (wireless personal area network) and MIMO (multi-input/ multi-output), offering the reader an overall perspective of the pros and cons of each. Focuses on practical design, examples and ‘real world’ solutions. Printed Antennas for Wireless Communications offers an excellent insight on printed antennas from the theoretical to the practical; hence it will appeal to practicing design engineers within commercial and governmental/ military organistations, as well as postagraduate students and researchers in communications technology

Printed antennas have become an integral part of next-generation wireless communications and have been found to be commonly used to improve system capacity, data rate, reliability, etc. This book covers theory, design techniques, and the chronological regression of the printed antennas for various applications. This book will provide readers with the basic conceptual knowledge about antennas along with advanced techniques for antenna design. It covers a variety of analytical techniques and their CAD applications and discusses new applications of printed antenna technology such as sensing. The authors also present special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS. The book will be useful to students as an introduction to design and applications of antennas. Additionally, experienced researchers in this field will find this book a ready reference and benefit from the techniques of research in printed antennas included in this book. Following are some of the salient features of this book: Covers a variety of analytical techniques and their CAD applications Discusses new applications of printed antenna technology such as sensing Examines the state of design techniques of printed antenna Presents special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS

In-depth and practical coverage of design considerations for 5G antennas In Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications, two distinguished researchers deliver a holistic, multidisciplinary approach to antenna design methodologies. The book covers approaches ranging from sub-6GHz microwave to the millimeter-wave spectrum, explaining how microwave and millimeter-wave 5G antennas coexist and function, both independently and collaboratively. The book offers coverage of key considerations for designing millimeter-wave 5G antennas within space-constrained mobile devices, as well as practical concerns, like cost, fabrication yield, and heat dissipation. Readers will also find explorations of the likely future directions of 5G antenna evolution, as well as: A thorough introduction to basic concepts in 5G FR1 Band mobile antenna design, including discussions of antenna placement, element design, and topologies Comprehensive explorations of antenna feeding mechanisms and impedance matching, including chassis considerations and effects Practical discussions of frequency tunable millimeter-wave 5G antenna-in-package Fulsome treatments of compact millimeter-wave 5G antenna solutions and millimeter-wave antenna-on-display technologies for 5G mobile devices Perfect for antenna, microwave, communications, and radio-frequency engineers, Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications will also benefit graduate students, policymakers, regulators, and researchers with an interest in communications and antennas.

Discover current design practices and performance metrics in this comprehensive guide to the latest methods of developing MIMO antenna systems Multiple-input multiple-output (MIMO) antenna systems use multiple sets of antennas to increase the capacity of a radio link, or to send and receive multiple simultaneous data signals over the same radio channel. It’s become an increasingly integral part of wireless and mobile data networks, from the earliest generations of wireless internet to cutting-edge 5G systems. The coming 6G networks will also rely on 6G antenna systems, making it all the more critical for the next generation of engineers and antenna designers to have a firm grasp of this foundational technology. MIMO Antenna Systems for 5G and Beyond offers a timely introduction to these systems and their design principles. Incorporating the latest designs and a comprehensive overview of current system configurations, it provides complete design procedures and performance metrics for MIMO systems. The result is a one-stop shop for all MIMO applications and wireless standards. MIMO Antenna Systems for 5G and Beyond readers will also find: The first book ever to cover MIMO design practices specific to 5G wireless communications—and beyond Detailed discussion of MIMO configurations including passive, reconfigurable, beamforming, and more Detailed illustrations and design files MIMO Antenna Systems for 5G and Beyond is ideal for practicing engineers, as well as researchers in wireless and radio engineering sectors.

This comprehensive new resource guides professionals in the latest methods used when designing active integrated antennas (AIA) for wireless communication devices for various standards. This book provides complete design procedures for the various elements of such active integrated antennas such as the matching network, the amplifier/active element as well as the antenna. This book offers insight into how active integration and co-design between the active components (amplifier, oscillator, mixer, diodes) and the antenna can provide better power transfer, higher gains, increased efficiencies, switched beam patterns and smaller design footprints. It introduces the co-design approach of active integrated antennas and its superior performance over conventional methods. Complete design examples are given of active integrated antenna systems for narrow and wideband applications as well as for multiple-input-multiple-output (MIMO) systems. Readers find the latest design methods for narrow and broadband RF matching networks. This book provides a complete listing of performance metrics for active integrated antennas. The book serves as a complete reference and design guide in the area of AIA.