The use of pressuremeters in predicting in situ soil properties is increasing as the technique becomes established as a reliable method of site investigation. This book provides a thorough review of the topic and its use in site investigation.

Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

The pressuremeter is a versatile piece of ground investigation equipment that can be used to test any type of soil or rock in situ. It quantifies in-situ stress, stiffness, strength and permeability – the essential properties needed to design geotechnical structures. The results are used in pressuremeter specific design methods, empirical design methods and numerical analyses. This reference book covers the types of pressuremeter and the control equipment, methods of installation, test procedures, methods of analysis including direct and indirect methods of interpretation, and application in design. This is supported by an exemplar specification for field operations with the interpretation of the results. Engineers are given enough detail to apply the results confidently. This comprehensive and thorough discussion of pressuremeter testing in geotechnical design draws on over forty years’ experience in geotechnical engineering. It is essential for professional and academic engineering geologists and geotechnical, civil and structural engineers involved in ground investigation and geotechnical design.

This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

This book presents selected papers from the International Symposium on Geotechnics for Transportation Infrastructure (ISGTI 2018). The research papers cover geotechnical interventions for the diverse fields of policy formulation, design, implementation, operation and management of the different modes of travel, namely road, air, rail and waterways. This book will be of interest to academic and industry researchers working in transportation geotechnics, as also to practicing engineers, policy makers, and civil agencies.

This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground

Pressuremeter testing activities are of great interest for scientists and engineers concerned with the mechanical behaviour of civil engineering materials. The proceedings include the first Menard Lecture presented by Professor Branko Ladanyi and 57 technical papers from 16 countries. They are related to the application of pressuremeter testing to granular and alluvial soils, clay, rock, concrete and permafrost, and geotechnical design. It also includes a session on technological developments in the design, fabrication and installation of pressuremeters.

Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.