The first of its kind, this modern, comprehensive text covers both analysis and design of piping systems. The authors begin with a review of basic hydraulic principles, with emphasis on their use in pumped pipelines, manifolds, and the analysis and design of large pipe networks. After the reader obtains an understanding of how these principles are implemented in computer solutions for steady state problems, the focus then turns to unsteady hydraulics. These are covered at three levels:

Water distribution systems are made up of pipe, valves and pumps through which treated water is moved from the treament plant to homes, offices, industries, and other consumers. The types of materials and equipment used by each water system are usually governed by local conditions, past practices, and economics. Consequently, drinking water professionals must be knowledgeable about common types of equipment and operating methods that are available. Completely revised and updated, Water transmission and distribution includes information on the following: distribution system design and operation and maintenance ; piping materials ; valves, pumps, and water meters ; water main installation ; backfilling, main testing, and installation safety ; fire hyfrants ; water storage ; water services ; cross-connection control ; motors and engines ; instrumentation and control ; information management and public relations.--Cover page [4].

The book describes the causes and effects of transient (water hammer) events in liquid-filled pipes, and describes how the powerful and stable Wave Plan Method (WPM) can be used to address transients during surge modeling. The authors compare and contrast WPM with the Method of Characteristics (MOC), which is the other widely-used surge analysis tool. While MOC can be useful for many situations, the larger and more complex a model becomes, the more the computational efficiency of WPM is necessary to avoid longer and longer analysis times. The authors also describe how WPM is more generalizable than MOC, which is a term that describes a suite of tools consisting of several variants that were developed to address different modeling situations. This book provides details on surge modeling in general and the use of WPM in particular. This includes pressure attenuation, determination of wave speeds in different pipe types and various liquid media, pump and turbine characteristics curves, and the effects of boundary conditions. The discussion of boundary conditions includes an extensive look at the effects of the air-water interface as it applies to bulk air intrusion into pipelines, and as it relates to the use of air/vacuum valves as surge protection. The authors discuss surge protection design for different real-world scenarios, and how to model of a full list of surge control devices, including a detailed discussion of check valves. Last, the book describes the assumptions and uncertainties encountered during data collection and model building, and examines the potential effect of these uncertainties. Where uncertainties cannot be mitigated, the authors discuss ways to increase the safety factor of surge protection designs.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

An exploration of the solution of practical engineering problems in fluid transients. This book develops the basic equations of one-dimensional unsteady fluid transients and uses them throughout as they apply to problems in diverse industries, and on systems of different geometric scales.

The Water Science and Technology Board has released the first report of the Committee on Public Water Supply Distribution Systems: Assessing and Reducing Risks, which is studying water quality issues associated with public water supply distribution systems and their potential risks to consumers. The distribution system, which is a critical component of every drinking water utility, constitutes a significant management challenge from both an operational and public health standpoint. This first report was requested by the EPA, as the agency considers revisions to the Total Coliform Rule with potential new requirements for ensuring the integrity of the distribution system. This first report identifies trends relevant to the deterioration of drinking water quality in distribution systems and prioritizes issues of greatest concern according to high, medium, and low priority categories. Of the issues presented in nine EPA white papers that were reviewed by the committee, cross connections and backflow, new or repaired water mains, and finished water storage facilities were judged by the committee to be of the highest importance based on their associated potential health risks. In addition, the report noted that two other issues should also be accorded high priority: premise plumbing and distribution system operator training. This first report will be followed in about 18 months by a more comprehensive final report that evaluates approaches for risk characterization and identifies strategies that could be considered to reduce the risks posed by water-quality deteriorating events.