Concrete bridges are an important part of today's road infrastructure. An important part of those concrete bridges is to a large extent prefabricated. Precast concrete enables all the advantages of an industrialized process to be fully utilized. Contemporary concrete mixtures are used to realize high-strength bridge girders and piers that exactly meet the requirements set, both structurally and aesthetically, with a small ecological footprint. Sustainable and durable! On the construction site, there is no need for complex formwork, the execution time is drastically reduced and where road, water and rail traffic on or under the bridge has to be temporarily interrupted, it is only minimally inconvenienced during the execution of the project. There is a wide variety of prefabricated bridges. In 2004, the fib commission on prefabrication already published the Bulletin 29 Precast concrete bridges which, in addition to the history of prefabricated bridges, also gave an overview of the different bridge types and structural systems. This document elaborates on one specific structural system: the continuous bridge. Task Group 6.5 "Precast concrete bridges" discusses in detail how to achieve continuity over the piers with precast elements. This bulletin bundles the experiences of experts in the field of bridge design so that less experienced designers would be able to identify the points of attention and make a correct design. In addition to the theoretical considerations, the principles are tested against three realizations in the USA and Europe. Commission 6 thanks the Co-Conveners Maher Tadros and Hugo Corres and all active members of the Task Group for sharing their knowledge and experience and for the successful realization of this bulletin.

Concrete bridges are an important part of today's road infrastructure. An important part of those concrete bridges is to a large extent prefabricated. Precast concrete enables all the advantages of an industrialized process to be fully utilized. Contemporary concrete mixtures are used to realize high-strength bridge girders and piers that exactly meet the requirements set, both structurally and aesthetically, with a small ecological footprint. Sustainable and durable! On the construction site, there is no need for complex formwork, the execution time is drastically reduced and where road, water and rail traffic on or under the bridge has to be temporarily interrupted, it is only minimally inconvenienced during the execution of the project. Bridges capture the imagination. In addition to their pure functionality, overcoming a height difference, they offer designers unprecedented opportunities to shape their creativity, including when using precast concrete. This bulletin, prepared by the experts of Task Group 6.5 'Precast concrete bridges', takes a closer look at the conceptual (preliminary) design of prefabricated concrete bridges. The bulletin does not have the ambition to define the umbrella term 'conceptual design' but shows in a pragmatic way, using 24 examples spread all over the world, how leading designers use this methodology to select from the many possibilities to arrive at an ideal solution taking into account all design conditions. One often reads that experience is a necessary condition for good conceptual design. The pooled knowledge and experience in this bulletin already provide the reader with a good head start. Commission 6 thanks the former convener of the Task Group Hugo Corres, editor of this document, and the current co-conveners Marcello Waimberg and Ken-ichi Kata as well as all active members of the Task Group for sharing their knowledge and experience and for the successful realization of this bulletin.

This book contains the invited contributions to the 1993 Henderson Colloquium organised by the British Group of IABSE (International Association for Bridge and Structural Engineering). It provides an international review of new techniques of designing and constructing joint-free bridges - an approach which is rapidly being developed and used in many parts of the world.

Introduction and Research Approach -- Findings -- Interpretation, Appraisal, and Application -- Interpretation, Appraisal, and Application -- References -- Appendixes.

This report was drafted by fib Task Group 6.4, Precast bridges: José Calavera (Convenor, Spain) André De Chefdebien (CERIB, France), David Fernández-Ordóñez (Prefabricados Castelo, S.A., Spain, Secretary), Antonello Gasperi (Consulting engineer, Italy), Jorge Ley (INTEMAC, Spain), Fritz Mönnig (Prof. Bechert & Partner, Germany), Pierre Passeman (CERIB, France), C. Quartel (Spanbeton BV, The Netherlands), Ladislav Sasek (VPU DECO Praha, Czech Republic), George Tootell (Buchan Concrete Ltd., UK), Arnold Van Acker (Belgium)

Describes several bridging concepts, which were developed and successfully applied during the author's forty years of close involvement with UK and international bridge design, construction, maintenance and research. The concepts mainly apply to the small/medium span range of bridges and viaducts.

The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.

In the last two decades, the rapid deterioration of bridge structures has become a serious technical and economical problem in many countries, including highly developed ones. Therefore, bridge rehabilitation has also become a very essential factor (sometimes even a decisive one) in contemporary bridge engineering. The book covers in synthetic form nearly all the most important problems concerning bridge rehabilitation, such as bridge superstructure and substructure, the typical damage observed in bridges as well as the assessment and evaluation techniques of their technical condition. The book is intended mainly for postgraduate university students. Therefore, all the problems are mostly presented in their physical, chemical and technical as well as economical aspects. The relevant requirements are treated as objective ones, i.e. irrespective of the rules, standards, regulations or guidelines particular to any country. This approach to the subject gives the book a more general character and therefore makes it a useful text for most civil engineering courses./a

As the emphasis in construction moves from building new bridges to maintenance and rehabilitation of existing stock, bridge management is becoming an increasingly important subject. This is the definitive, single volume reference for professionals and postgraduates, covering the whole gamut of bridge management topics. Highly illustrated and in ful