These proceedings contain the papers presented at the 7th International Symposium on Practical Design of Ships and Mobile Units. The symposium was held at the Congress Centre in The Hague, The Netherlands on 20-25 September, 1998.The overall aim of PRADS conferences is to advance the design of ships and mobile marine structures through the exchange of knowledge and the promotion of discussions on relevant topics in the fields of naval architecture and marine and offshore engineering. Greater international co-operation of this kind can help improve design and production methods and so increase the efficiency, economy and safety of ships and mobile units. The main themes of this symposium are design synthesis, production, ship hydromechanics, ship structures and materials and offshore engineering. Some topics which attracted many papers were design loads, design for ultimate strength, impact of safety and environment, grounding and collision, resistance and flow, seakeeping, fatigue considerations and propulsor and propulsion systems.

Ship and Mobile Offshore Unit Automation: A Practical Guide: A Practical Guide gives engineers a much-needed reference on relevant standards and codes, along with practical case studies on how to use these standards on actual projects and plans. Packed with the critical procedures necessary for each phase of the project, the book also gives an outlook on trends of development for control and monitoring systems, including usage of artificial intelligence in software development and prospects for the use of autonomous vessels.Rounding out with a glossary and introductory chapter specific to the new marine engineer just starting, this book delivers a source of valuable information to help offshore engineers be better prepared to safely and efficiently design today's offshore unit control systems. - Helps readers understand the worldwide offshore unit regulations necessary for monitoring systems and automation installation, including ISO, IEC, IEEE, IMO, SOLAS AND MODU, ABS, DNVGL, API, NMA and NORSOK - Presents real-world examples that apply standards - Provides tactics on how to procure control and monitoring systems specific to the offshore industry

First published in 1981 as the Offshore Information Guide this guide to information sources has been hailed internationally as an indispensable handbook for the oil, gas and marine industries.

This book comprises selected proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018), focusing on emerging opportunities and challenges in the field of ocean engineering and offshore structures. It includes state-of-the-art content from leading international experts, making it a valuable resource for researchers and practicing engineers alike.

Marine Rudders and Control Surfaces guides naval architects from the first principles of the physics of control surface operation, to the use of experimental and empirical data and applied computational fluid dynamic modelling of rudders and control surfaces.The empirical and theoretical methods applied to control surface design are described in depth and their use explained through application to particular cases. The design procedures are complemented with a number of worked practical examples of rudder and control surface design.• The only text dedicated to marine control surface design• Provides experimental, theoretical and applied design information valuable for practising engineers, designers and students• Accompanied by an online extensive experimental database together with software for theoreticalpredictions and design development

Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

The IUTAM Symposium on "Discrete Structural Optimization" was devoted to discuss optimization problems for which design va riables may not be sought among continuous sets. Optimum sizing from lists of available profiles, segmentation; as well as allocation and number of supports, sensors or actuators, are good exam ples of such problems for which design variables may be chosen only from finite sets. The above problems are having not only important practical applications. They are also inspiring scienti fic research in the field of discrete applied mathematics. Among them are controlled enumeration methods, subgradient approach, genetic programming, multicriteria optimization, neural nets etc. Along with its tradition of promoting and supporting new im portant fields of research in mechanics and its application, General Assembly of IUTAM decided in 1990 to support the Sumposium. It is worthy to note that this is the second IUTAM Symposium on structural optimization, organized in Poland. The first one was held in Warsaw twenty years ago and was organized by Profe ssors Sawczuk and Mroz. It was devoted mostly to problems with continuous design variables. The Symposium which gathered 40 participants from 12 coun tries was sponsored by several institutions listed below. However support by IUTAM should be specially appreciated. It helped se veral scientists to contribute to the Symposium which other way wouldn't attend the meeting.

Contains papers presented at the Third International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (1997), which provide evidence that computer-based models, and in particular numerical methods, are becoming essential tools for the solution of many problems encountered in the field of biomedical engineering. The range of subject areas presented include the modeling of hip and knee joint replacements, assessment of fatigue damage in cemented hip prostheses, nonlinear analysis of hard and soft tissue, methods for the simulation of bone adaptation, bone reconstruction using implants, and computational techniques to model human impact. Computer Methods in Biomechanics and Biomedical Engineering also details the application of numerical techniques applied to orthodontic treatment together with introducing new methods for modeling and assessing the behavior of dental implants, adhesives, and restorations. For more information, visit the "http://www.uwcm.ac.uk/biorome/international symposium on Computer Methods in Biomechanics and Biomedical Engineering/home page, or "http://www.gbhap.com/Computer_Methods_Biomechanic s_Biome dical_Engineering/" the home page for the journal.

This important, self-contained reference deals with structural life assessment (SLA) and structural health monitoring (SHM) in a combined form. SLA periodically evaluates the state and condition of a structural system and provides recommendations for possible maintenance actions or the end of structural service life. It is a diversified field and relies on the theories of fracture mechanics, fatigue damage process, and reliability theory. For common structures, their life assessment is not only governed by the theory of fracture mechanics and fatigue damage process, but by other factors such as corrosion, grounding, and sudden collision. On the other hand, SHM deals with the detection, prediction, and location of crack development online. Both SLA and SHM are combined in a unified and coherent treatment.