THE DEFINITIVE GUIDE TO SELECTING, OPERATING, AND MAINTAINING POWER PLANT EQUIPMENT Power Plant Equipment Operation and Maintenance Guide provides detailed coverage of different types of power plants such as modern co-generation, combined-cycle, and integrated gasification combined cycle (IGCC) plants. The book describes the design, selection, operation, maintenance, and economics of all these power plants. The best available power enhancement options are discussed, including duct burners, evaporative cooling, inlet-air chilling, absorption chilling, steam and water injection, and peak firing. This in-depth resource addresses the sizing, selection, calculations, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all power plant equipment, including steam turbines, steam generators, boilers, condensers, heat exchangers, gas turbines, compressors, pumps, advanced sealing mechanisms, magnetic bearings, and advanced generators. Coverage includes: Methods for enhancing the reliability and maintainability of all power plants Economic analysis of modern co-generation and combined-cycle plants Selection of the best emission-reduction method for power plants Preventive and predictive maintenance required for power plants Gas turbine applications in power plants, protective systems, and tests

THE DEFINITIVE GUIDE TO SELECTING, OPERATING, AND MAINTAINING POWER PLANT EQUIPMENT Power Plant Equipment Operation and Maintenance Guide provides detailed coverage of different types of power plants such as modern co-generation, combined-cycle, and integrated gasification combined cycle (IGCC) plants. The book describes the design, selection, operation, maintenance, and economics of all these power plants. The best available power enhancement options are discussed, including duct burners, evaporative cooling, inlet-air chilling, absorption chilling, steam and water injection, and peak firing. This in-depth resource addresses the sizing, selection, calculations, operation, diagnostic testing, troubleshooting, maintenance, and refurbishment of all power plant equipment, including steam turbines, steam generators, boilers, condensers, heat exchangers, gas turbines, compressors, pumps, advanced sealing mechanisms, magnetic bearings, and advanced generators. Coverage includes: Methods for enhancing the reliability and maintainability of all power plants Economic analysis of modern co-generation and combined-cycle plants Selection of the best emission-reduction method for power plants Preventive and predictive maintenance required for power plants Gas turbine applications in power plants, protective systems, and tests

The Best On-the-Job Guide to Industrial Plant Equipment and Systems This practical, one-of-a-kind field manual explains how equipment in industrial facilities operates and covers all aspects of commissioning relevant to engineers and project managers. Plant Equipment and Maintenance Engineering Handbook contains a data log of all major industrial and power plant components, describes how they function, and includes rules of thumb for operation. Hundreds of handy reference materials, such as calculations and tables, plus a comprehensive listing of electrical parts with common supplier nomenclature are also included in this time-saving resource. FEATURES DETAILED COVERAGE OF: Compressors * Air conditioning * Ash handling * Bearings and lubrication * Boilers * Chemical cleaning and Flushing * Condensers and circulating water systems * Controls * Conveyor systems * Cooling towers * Corrosion Deaerators * Diesel and gas turbines * Electrical * Fans * Fire protection * Fuels and combustion * Piping * Pumps Turbines * Vibration * Water treatment

The definitive reference on the role of steam in the production and operation of power plants for electric generation and industrial process applications For more than 80 years, Steam Plant Operation has been an unmatched source of information on steam power plants, including design, operation, and maintenance. The Tenth Edition emphasizes the importance of devising a comprehensive energy plan utilizing all economical sources of energy, including fossil fuels, nuclear power, and renewable energy sources. This trusted classic discusses the important role that steam plays in our power production and identifies the associated risks and potential problems of other energy sources. You will find concise explanations of key concepts, from fundamentals through design and operation. For energy students, Steam Plant Operation provides a solid introduction to steam power plant technology. This practical guide includes common power plant calculations such as plant heat rate, boiler efficiency, pump performance, combustion processes, and explains the systems necessary to control plant emissions. Numerous illustrations and clear presentation of the material will prove invaluable for those preparing for an operator’s license exam. Examples throughout show real-world application of the topics discussed. COVERAGE INCLUDES: • Steam and Its Importance • Boilers • Design and Construction of Boilers • Combustion of Fuels • Boiler Settings, Combustion Systems, and Auxiliary Equipment • Boiler Accessories • Operation and Maintenance of Boilers • Pumps • Steam Turbines, Condensers, and Cooling Towers • Operating and Maintaining Steam Turbines, Condensers, Cooling Towers, and Auxiliaries • Auxiliary Steam Plant Equipment • Environmental Control Systems • Waste-to-Energy Plants

The second edition of a bestseller, this definitive text covers all aspects of testing and maintenance of the equipment found in electrical power systems serving industrial, commercial, utility substations, and generating plants. It addresses practical aspects of routing testing and maintenance and presents both the methodologies and engineering basics needed to carry out these tasks. It is an essential reference for engineers and technicians responsible for the operation, maintenance, and testing of power system equipment. Comprehensive coverage includes dielectric theory, dissolved gas analysis, cable fault locating, ground resistance measurements, and power factor, dissipation factor, DC, breaker, and relay testing methods.

Maximize your company’s energy output while ensuring the reliability and longevity of your industrial electrical equipment! Everything you need for selection, applications, operations, diagnostic testing, troubleshooting and maintenance for all capital equipment placed firmly in your grasp. Keeping your equipment running efficiently and smoothly could make the difference between profit and loss. Electrical Equipment Handbook: Troubleshooting and Maintenance provides you with the state-of–the-art information for achieving the highest performance from your transformers, motors, speed drives, generator, rectifiers, and inverters. With this book in hand you'll understand various diagnostic testing methods and inspection techniques as well as advance fault detection techniques critical components and common failure modes. This handbook will answer all your questions about industrial electrical equipment. In Electrical Equipment Handbook: Troubleshooting and Maintenance, you will: Learn about the various types of transformers, motors, variable speed drives, generators, rectifiers, inverters, and uninterrupted power systems. Understand diagnostic testing and inspection, advanced fault detection techniques, critical components, and common failure modes. Study selection criteria, commissioning requirements, predictive and preventive maintenance, reliability, testing and cost discover the maintenance required to minimize their operating cost and maximize their efficiency, reliability and longevity.

Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance.This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes.The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide.* A Flagship reference work for the Plant Engineering series* Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer* Includes an international perspective including dual units and regulations

This book offers comprehensive coverage of the operation and maintenance of large hydro generators This book is a practical handbook for engineers and maintenance staff responsible for the upkeep of large salient-pole hydro generators used in electric power plants. Focusing on the physics and maintenance of large vertical salient pole generators, it offers readers real-world experience, problem description, and solutions, while teaching them about the design, modernization, inspections, maintenance, and operation of salient pole machines. Handbook of Large Hydro Generators: Operation and Maintenance provides an introduction to the principles of operation of synchronous machines. It then covers design and construction, auxiliary systems, operation and control, and monitoring and diagnostics of generators. Generator protection, inspection practices and methodology and auxiliaries inspections are also examined. The final two chapters are dedicated to maintenance and testing, and maintenance philosophies, upgrades, and uprates. The handbook includes over 420 color photos and 180 illustrations, forms, and tables to complement the topics covered in the chapters. Written with a machine operator and inspector in mind, Handbook of Large Hydro Generators: Operation and Maintenance: Instructs readers how to perform complete machine inspections, understand what they are doing, and find solutions for any problems encountered Includes real-life, practical, field experiences so that readers can familiarize themselves with aspects of machine operation, maintenance, and solutions to common problems Benefits experienced and new power plant operators, generator design engineers and operations engineers. Is authored by industry experts who participated in the writing and maintenance of IEEE standards (IEEE C50.12 and C50.13) on the subject Handbook of Large Hydro Generators: Operation and Maintenance is an ideal resource for scientists and engineers whose research interest is in electromagnetic and energy conversion. It is also an excellent book for senior undergraduate and graduate students majoring in energy generation, and generator operation and maintenance.

Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

Plant Design and Operations provides practical guidance on the design, operation, and maintenance of process facilities. The book is based on years of hands-on experience gathered during the design and operation of a wide range of facilities in many different types of industry including chemicals, refining, offshore oil and gas, and pipelines. The book helps managers, engineers, operators, and maintenance specialists with advice and guidance that can be used right away in working situations. Each chapter provides information and guidance that can be used immediately. For example, the chapter on Energy Control Procedures describes seven levels of positive isolation — ranging from a closed block valve all the way to double block and bleed with line break. The Safety in Design chapter describes topics such as area classification, fire protection, stairways and platforms, fixed ladders, emergency showers, lighting, and alarms. Other areas covered in detail by the book include security, equipment, and transportation. A logical, practical guide to maintenance task organization is provided, from conducting a Job Hazards Analysis to the issue of a work permit, and to the shutdown and isolation of equipment. Common hazards are covered in detail, including flow problems, high pressure, corrosion, power failure, and many more. - Provides information to managers, engineers, operators and maintenance personnel which is immediately applicable to their operations - Supported by useful, real-world examples and experience from a wide range of facilities and industries - Includes guidance on occupational health and safety, industrial hygiene and personal protective equipment