This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.

This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group

Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author's experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. - Convenient for day-to-day consults - Numerous design examples for sandy soils, clay soils, and seismic loadings - Now including helical, composite, wind turbine monopiles, and spiral coil energy piles - Methodologies and case studies for different pile types - Serves as PE exam preparation material

The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Piled foundations are generally designed using empirical methods, in particular the traditional capacity based approach on which the majority of codes of practice are based. However in recent years the analysis of pile groups and piled rafts has undergone substantial development in the light of new research and the mechanisms for the interactions b

This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

Geotechnical Engineering Calculations and Rules of Thumb offers geotechnical, civil and structural engineers a concise, easy-to-understand approach the formulas and calculation methods used in of soil and geotechnical engineering. A one stop guide to the foundation design, pile foundation design, earth retaining structures, soil stabilization techniques and computer software, this book places calculations for almost all aspects of geotechnical engineering at your finger tips. In this book, theories is explained in a nutshell and then the calculation is presented and solved in an illustrated, step-by-step fashion. All calculations are provided in both fps and SI units. The manual includes topics such as shallow foundations, deep foundations, earth retaining structures, rock mechanics and tunnelling. In this book, the author's done all the heavy number-crunching for you, so you get instant, ready-to-apply data on activities such as: hard ground tunnelling, soft ground tunnelling, reinforced earth retaining walls, geotechnical aspects of wetland mitigation and geotechnical aspects of landfill design. - Easy-to-understand approach the formulas and calculations - Covers calculations for foundation,earthworks and/or pavement subgrades - Provides common codes for working with computer software - All calculations are provided in both US and SI units

The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.

In Foundation Design: Theory and Practice, Professor N. S. V. Kameswara Rao covers the key aspects of the subject, including principles of testing, interpretation, analysis, soil-structure interaction modeling, construction guidelines, and applications to rational design. Rao presents a wide array of numerical methods used in analyses so that readers can employ and adapt them on their own. Throughout the book the emphasis is on practical application, training readers in actual design procedures using the latest codes and standards in use throughout the world. Presents updated design procedures in light of revised codes and standards, covering: American Concrete Institute (ACI) codes Eurocode 7 Other British Standard-based codes including Indian codes Provides background materials for easy understanding of the topics, such as: Code provisions for reinforced concrete Pile design and construction Machine foundations and construction practices Tests for obtaining the design parameters Features subjects not covered in other foundation design texts: Soil-structure interaction approaches using analytical, numerical, and finite element methods Analysis and design of circular and annular foundations Analysis and design of piles and groups subjected to general loads and movements Contains worked out examples to illustrate the analysis and design Provides several problems for practice at the end of each chapter Lecture materials for instructors available on the book's companion website Foundation Design is designed for graduate students in civil engineering and geotechnical engineering. The book is also ideal for advanced undergraduate students, contractors, builders, developers, heavy machine manufacturers, and power plant engineers. Students in mechanical engineering will find the chapter on machine foundations helpful for structural engineering applications. Companion website for instructor resources: www.wiley.com/go/rao