Philip Reed, best known for his superb models of ships from the age of sail, here turns his attention to the other highly popular subject for ship modelers - the warships of the Second World War. The book is a step-by-step manual for building a scratch waterline model of the Ca Class destroyer HMS Caesar, the sistership of Cavalier now on display in drydock at Chatham Historical Dockyard. These emergency built ships were launched between 1943 and 1945 and Caesar herself was to see action in 1944 on the Russian convoys and then in defense of the Western Approaches. The model presented in the book is built to the scale of 16ft to the inch and is designed to be displayed as a waterline model in a diorama. Every aspect is covered from the construction of a bread and butter hull through to the the details of camouflage, bridge, funnel, mast, the 4.5in, Hazemeyer and Oerlikon guns, boats, davits, depth charge gear, torpedo tubes, searchlights, vents and lockers,and the sea itself. Ship’s plans and a picture gallery at the end of the book devoted to a whole array of the author’s WWII model warships complete the book. More than fifty years of modeling experience is passed on through wise and practical advice and thus each page will be of the utmost value to scratch builders and to any kit builders who may be setting out to construct a model of a WWII warship.

“[A] very useful little reference book . . . for members who strive to achieve an accurate set of rigging lines on their models.”—Bottleships Employing superb, clear draftsmanship, this book illustrates each and every detail of the rigging of typical period fore-and-aft vessels. The rigging of period ship models is arguably the most complex task that any modeler has to accomplish; the intricacies can be daunting, and visual references limited. The author’s first book, Rigging Period Ship Models, was a triumph of clarity for those needing to decipher the complexities of square rig and has now sold in multiple editions. This book does the same for fore-and-aft craft and deploys three typical eighteenth-century types—an English cutter, a three-masted French lugger and an American schooner. Some 200 diagrams show clearly where each separate item of standing and running rigging is fitted, led and belayed. Whatever the requirements of the modelmaker, all the information is here. This edition brings a visual clarity to the complexities of period rigging and will delight anyone with an interest in the rigging of traditional fore-and-aft craft. “This book is naturally highly commended to its target audience, but anyone with an interest in sailing ships will find it an interesting source of information that can be very hard to find.”—Firetrench “Not just for modelers but also a boon to traditional seafarers and readers of historical fiction.”—Julian Stockwin, author of To the Eastern Seas

The fourth edition of the acclaimed full-colour annual focusing on all facets of 'scratch-built' model shipbuilding, as well as related articles on restoration, archaeology, historical research and marine art. Twenty articles describe, explain, inform and inspire, illustrated with modelmakers' own photographs, archival plans, prints and artworks. The annual succeeds Model Shipwright, the quarterly journal which ran to 144 issues spanning 36 years. This edition includes new research and builds, plus additional sections including a Modeller's Draught, Book News and an image gallery. Fully international in scope, Shipwright is an essential volume for any dedicated ship modeller or maritime enthusiast.

This new shipmodeller's manual explains in a graphic manner how to build a small 1/16th scale model of the American privateer schooner Prince de Neufchatel. World-renowned ship modeller Phil Reed describes in this new book how to build two versions of this ship: a waterline model and a full-hull display model.

AWARDED THE ANDERSON MEDAL 2020 Inspired by the recent discovery of mathematically calculated digital plans for a fourth-rate ship by the Deptford master shipwright, John Shish, The Master Shipwright's Secrets is an illustrated history of Restoration shipbuilding focused on the Tyger, one of the smaller but powerful two-deck warships of the period. It examines the proceedings of King Charles II in deciding the types of ship he wanted and his relationship with his master shipwrights. This fascinating book reveals the many secrets of Charles II's shipwrights through an analysis of John Shish's plans for the Tyger, revealing innovative practical calculations which differ significantly from the few contemporary treatises on the subject and the complicated process of constructing the moulds necessary to make the ship's frame. All the other duties performed by the master shipwrights, such as repairing ships, controlling their men and keeping up with the latest inventions are also discussed in detail. The Master Shipwright's Secrets is replete with beautiful and detailed illustrations of the construction of the Tyger and explores both its complicated history and its complex rebuilding, complete with deck plans, internal sections, and large-scale external shaded drawings. The title also explores associated ships, including another fourth-rate ship, the Mordaunt, which was purchased into the Navy at the time and underwent a dimensional survey by John Shish. A rare contemporary section drawing of another fourth-rate English ship and constructional drawings of Shish's later fourth-rate ship, St Albans, are also included.

In terms of quality, historical significance and sheer numbers, the Kriegstein family’s ship model collection in the United States is the finest in private hands anywhere in the world. Principally made up of official 17th- and 18th-century models in the Admiralty or Navy Board style, the collection is unrivalled by any museum outside the British national collection at Greenwich. As the models are not on public display, this book fills the need for a detailed catalogue and visual reference with superb colour photos of all the models, both overall portraits and multiple close-ups. Apart from lengthy descriptions of these magnificent artefacts, space is devoted to how they were identified, and the valuable research done by Arnold and Henry Kriegstein, the identical twins whose shared passion brought this all together. Beyond the technicalities of the ships, the story has a human dimension in the brothers’ adventures in pursuit of every model and their dogged determination to secure them against official obstruction and dubious antiques-trade practices. This is an entirely new and revised edition of Seventeenth and Eighteenth Century Ship Models first published in 2007, now expanded to include the additions to the collection since that date.

The vast majority of period ship models are built from kits, usually primarily of wood with some ready-made fittings. Although these commercial offerings have improved significantly in recent years, all of them can be enhanced in accuracy or detail by an experienced modelmaker. This book, by an expert ship modeller, distils lessons gleaned from a lifetime practising the hobby to the highest standards, setting out methods of improving basic kits and gradually developing the skills and confidence to tackle the construction of a model from scratch. Using a variety of kits as the starting point, each chapter demonstrates a technique that can be readily improved or a feature that can be replaced to the advantage of the finished model. Topics include hull planking, representing copper sheathing, many aspects of more accurate masting and rigging, and how to replace kit parts and fittings from scratch. Ultimately, the impact of a period model depends on its accuracy, and the book also provides guidance on plans and references, where to find them and how they are best used. The plank-on-frame model, sometimes with exposed frames in the Navy Board style, has always been considered the crowning achievement of period ship modeling, and this book concludes with coverage of the very latest kits that put fully framed models within the reach of ordinary mortals. Offering advice, expertise and inspiration, Ship Models from the Age of Sail has something for anyone interested in building a period ship model, whatever their level of skill.

This new shipmodeller's manual explains in graphic manner how to build a small 1/16th scale model of the American privateer schooner Prince de Neufchatel. She was one of a new class of large, fast and seaworthy schooners that first made their appearance during the war of 1812. She had a short but notoriously successful career that earned her a permanent place in her nation's history. World-renowned ship modeller Phil Reed describes in this new book how to build two versions of this ship: a waterline model and a full-hull display model. Building on the success of his first book, Modelling Sailing Men-of-War, which described the complex building process of the 74-gun ship, he has here taken a simpler vessel, to encourage the less experienced shipwright to embark upon a scratch-built hull. Taking this schooner as a prototype, the author passes on a wealth of experience which will enable modellers of all skill levels to confidently tackle every aspect of building any small fore-and-aft rigged vessel.