Particle Deposition and Aggregation: Measurement, Modelling and Simulation describes how particle deposition and aggregation can be measured, modeled, and simulated in a systematic manner. It brings together the necessary disciplines of colloid and surface chemistry, hydrodynamics, experimental methods, and computational methods to present a unified approach to this problem. The book is divided into four parts. Part I presents the theoretical principles governing deposition and aggregation phenomena, including a discussion of the forces that exist between particles and the hydrodynamic factors that control the movement of the particles and suspending fluid. Part II introduces methods for modeling the processes, first at a simple level (e.g. single particle-surface, single particle-single particle interactions in model flow conditions) and then describes the simulation protocols and computation tools which may be employed to describe more complex (multiple-particle interaction) systems. Part III summarizes the experimental methods of quantifying aggregating and depositing systems and concludes with a comparison of experimental results with those predicted using simple theoretical predictions. Part IV is largely based on illustrative examples to demonstrate the application of simulation and modeling methods to particle filtration, aggregation, and transport processes. This book should be useful to graduates working in process and environmental engineering research or industrial development at a postgraduate level, and to scientists who wish to extend their knowledge into more realistic process conditions in which the fluid hydrodynamics and other complicating factors must be accommodated.

The manufacture of plastic as well as its indiscriminate disposal and destruction by incineration pollutes atmospheric, terrestrial, and aquatic ecosystems. Synthetic plastics do not break down; they accumulate in the environment as macro-, micro-, and nanoplastics. These particulate plastics are a major source of pollutants in soil and marine ecosystems. Particulate Plastics in Terrestrial and Aquatic Environments provides a fundamental understanding of the sources of these plastics and the threats they pose to the environment. The book demonstrates the ecotoxicity of particulate plastics using case studies and offers management practices to mitigate particulate plastic contamination in the environment. Features · Describes physical and chemical properties of particulate plastics in terrestrial and aquatic ecosystems · Presents information on characteristics of particulate plastics as impacted by weathering processes · Provides numerous approaches for managing particulate plastic contamination · Identifies sources of particulate plastics in the environment; distribution and characteristics of particulate plastics; and management strategies of particulate plastics Written by a global team of scientists, this book is for researchers in the fields of environmental safety and waste management or individuals interested in the impact of particulate plastics on environmental health.

A new, definitive perspective of electrokinetic and colloid transport processes Responding to renewed interest in the subject of electrokinetics, Electrokinetic and Colloid Transport Phenomena is a timely overview of the latest research and applications in this field for both the beginner and the professional. An outgrowth of an earlier text (by coauthor Jacob Masliyah), this self-contained reference provides an up-to-date summary of the literature on electrokinetic and colloid transport phenomena as well as direct pedagogical insight into the development of the subject over the past several decades. A distinct departure from standard colloid science monographs, Electrokinetic and Colloid Transport Phenomena presents the most salient features of the theory in a simple and direct manner, allowing the book to serve as a stepping-stone for further learning and study. In addition, the book uniquely discusses numerical simulation of electrokinetic problems and demonstrates the use of commercial finite element software for solving these multiphysics problems. Among the topics covered are: * Mathematical preliminaries * Colloidal systems * Electrostatics and application of electrostatics * Electric double layer * Electroosmosis and streaming potential * Electrophoresis and sedimentation potential * London-Van der Waals forces and the DLVO theory * Coagulation and colloid deposition * Numerical simulation of electrokinetic phenomena * Applications of electrokinetic phenomena Because this thorough reference does not require advanced mathematical knowledge, it enables a graduate or a senior undergraduate student approaching the subject for the first time to easily interpret the theories. On the other hand, the application of relevant mathematical principles and the worked examples are extremely useful to established researchers and professionals involved in a wide range of areas, including electroosmosis, streaming potential, electrophoretic separations, industrial practices involving colloids and complex fluids, environmental remediation, suspensions, and microfluidic systems.

These volumes are part of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The three volumes present state-of-the art subject matter of various aspects of Common Fundamentals and Unit Operations in Thermal Desalination Systems such as: Conventional Water Treatment Technologies; Guidelines for Potable Water Purification; Advanced Treatment Technologies for Recycle - Reuse of Domestic Wastewater; Composition of Desalinated Water; Crystallization; Deep Bed Filtration: Modeling Theory and Practice; Distillation ; Rectification; Flocculation and Flocculation Filtration; Hazardous Waste Treatment Technologies; Microfiltration and Ultrafiltration; Post-Treatment of Distillate and Permeate; Pre-Cleaning Measures: Filtration; Raw Water Pre-Treatment: Sludge Treatment Technologies; Supercritical Extraction; Potential for Industrial Wastewater Reuse; Treatment of Industrial Wastewater by Membrane Bioreactors; Unconventional Sources of Water Supply; Problem of Non-Condensable Gas Release in Evaporators; Entrainment in Evaporators; Mist Eliminators; Chemical Hazards in Seawater Desalination by the Multistage-Flash Evaporation Technique; Concentration of Liquid Foods; Environmental Impact of Seawater Desalination Plants; Environmental Impacts of Intakes and Out Falls; Industrial Ecology, Water Resources, and Desalination; Rural and Urban Water Supply and Sanitation; Sustainable Development, Water Supply and Sanitation Technology These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

The advancements in micro- and nano-fabrication techniques, especially in the last couple of decades, have led research communities, over the world, to invest unprecedented levels of attention on the science and technology of micro- and nano-scale devices and the concerned applications. With an intense focus on micro- and nanotechnology from a fluidic perspective, Microfluidics and Microscale Transport Processes provides a broad review of advances in this field. A comprehensive compendium of key indicators to recent developments in some very active research topics in microscale transport processes, it supplies an optimal balance between discussions of concrete applications and development of fundamental understanding. The chapters discuss a wide range of issues in the sub-domains of capillary transport, fluidic resistance, electrokinetics, substrate modification, rotational microfluidics, and the applications of the phenomena of these sub-domains in diverse situations ranging from non-biological to biological ones like DNA hybridization and cellular biomicrofluidics. The book also addresses a generic problem of particle transport in nanoscale colloidal suspensions and includes a chapter on Lattice-Boltzmann methods for phase-changing problems which represents a generic particle based approach that may be useful to address many microfluidic problems of interdisciplinary relevance.

Water and Wastewater Treatment Technologies theme is a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Water and Wastewater Treatment Technologies deals, in three volumes, and covers several topics, with several issues of great relevance to our world such as: Urban Wastewater Treatment; Characteristics of Effluent Organic Matter in Wastewater; Filtration Technologies in wastewater treatment; Air Stripping in Industrial Wastewater Treatment; Dissolved air flotation in industrial wastewater treatment; Membrane Technology for Organic Removal in Wastewater; Adsorption and Biological Filtration in Wastewater Treatment; Physico-chemical processes for Organic removal from wastewater effluent; Deep Bed Filtration: Modelling Theory And Practice ; Specific options in biological wastewater treatment for reclamation and reuse ; Biological Phosphorus Removal Processes For Wastewater Treatment ; Sequencing Batch Reactors: Principles, Design/Operation And Case Studies ; Wastewater stabilization ponds (WSP)for wastewater treatment; Treatment of industrial wastewater by membrane bioreactors; Stormwater treatment technologies; Sludge Treatment Technologies ; Wastewater Treatment Technology For Tanning Industry; Palm Oil And Palm Waste Potential In Indonesia ; Recirculating Aquaculture Systems – A Review ; Upflow anaerobic sludge blanket (UASB)reactor in wastewater treatment; Applied Technologies In Municipal Solid Waste Landfill Leachate Treatment; Water Mining: Planning and Implementation Issues for a successful project; Assessment methodologies for water reuse scheme and technology; Nanotechnology for Wastewater Treatment. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, Managers, and Decision makers and NGOs W

The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.