This book discusses the practical aspects of electrical and thermal modeling of packages. In addition, processing concerns for plastic packaged GaAs parts are also covered. The book emphasizes low cost industry standard packages. However, the principles involved translate well to other categories of packages. Digital issues such as crosstalk are well documented in other books and are therefore not covered in detail in this text. The principles for generation of equivalent circuit package models applies to both digital and analog parts. Digital designers and packaging engineers should still find this text useful. Subtleties often overlooked by standard methods of modeling packages for digital applications are considered and will become more important to the digital packaging engineer as frequencies continue to increase. It is hoped this book will be useful to both microwave and digital integrated circuit (Ie) designers as well as packaging engineers. In the past these disciplines were distinct. Packaging engineers typically were concerned with only materials and mechanical issues of the package. As long as there was an electrical connection made from the die to the external pin, packaging engineers had the freedom to do anything they wanted between these two points. At high frequency the issues change. Packaging engineers now have to work with die level designers to either create a package that performs well at high frequencies or to use readily available low cost packages that happen to meet the needs of the application.

This book explains one of the hottest topics in wireless and electronic devices community, namely the wireless communication at mmWave frequencies, especially at the 60 GHz ISM band. It provides the reader with knowledge and techniques for mmWave antenna design, evaluation, antenna and chip packaging. Addresses practical engineering issues such as RF material evaluation and selection, antenna and packaging requirements, manufacturing tolerances, antenna and system interconnections, and antenna One of the first books to discuss the emerging research and application areas, particularly chip packages with integrated antennas, wafer scale mmWave phased arrays and imaging Contains a good number of case studies to aid understanding Provides the antenna and packaging technologies for the latest and emerging applications with the emphases on antenna integrations for practical applications such as wireless USB, wireless video, phase array, automobile collision avoidance radar, and imaging

Monolithic Microwave Integrated Circuit (MMIC) is an electronic device that is widely used in all high frequency wireless systems. In developing MMIC as a product, understanding analysis and design techniques, modeling, measurement methodology, and current trends are essential.Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies is a central source of knowledge on MMIC development, containing research on theory, design, and practical approaches to integrated circuit devices. This book is of interest to researchers in industry and academia working in the areas of circuit design, integrated circuits, and RF and microwave, as well as anyone with an interest in monolithic wireless device development.

This is a one-stop guide for circuit designers and system/device engineers, covering everything from CAD to reliability.

Thermal Management for Opto-electronics Packaging and Applications A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.

Every 3rd issue is a quarterly cumulation.