Introduction to Thin Film Transistors reviews the operation, application and technology of the main classes of thin film transistor (TFT) of current interest for large area electronics. The TFT materials covered include hydrogenated amorphous silicon (a-Si:H), poly-crystalline silicon (poly-Si), transparent amorphous oxide semiconductors (AOS), and organic semiconductors. The large scale manufacturing of a-Si:H TFTs forms the basis of the active matrix flat panel display industry. Poly-Si TFTs facilitate the integration of electronic circuits into portable active matrix liquid crystal displays, and are increasingly used in active matrix organic light emitting diode (AMOLED) displays for smart phones. The recently developed AOS TFTs are seen as an alternative option to poly-Si and a-Si:H for AMOLED TV and large AMLCD TV applications, respectively. The organic TFTs are regarded as a cost effective route into flexible electronics. As well as treating the highly divergent preparation and properties of these materials, the physics of the devices fabricated from them is also covered, with emphasis on performance features such as carrier mobility limitations, leakage currents and instability mechanisms. The thin film transistors implemented with these materials are the conventional, insulated gate field effect transistors, and a further chapter describes a new thin film transistor structure: the source gated transistor, SGT. The driving force behind much of the development of TFTs has been their application to AMLCDs, and there is a chapter dealing with the operation of these displays, as well as of AMOLED and electrophoretic displays. A discussion of TFT and pixel layout issues is also included. For students and new-comers to the field, introductory chapters deal with basic semiconductor surface physics, and with classical MOSFET operation. These topics are handled analytically, so that the underlying device physics is clearly revealed. These treatments are then used as a reference point, from which the impact of additional band-gap states on TFT behaviour can be readily appreciated. This reference book, covering all the major TFT technologies, will be of interest to a wide range of scientists and engineers in the large area electronics industry. It will also be a broad introduction for research students and other scientists entering the field, as well as providing an accessible and comprehensive overview for undergraduate and postgraduate teaching programmes.

Thin Film Metal-Oxides provides a representative account of the fundamental structure-property relations in oxide thin films. Functional properties of thin film oxides are discussed in the context of applications in emerging electronics and renewable energy technologies. Readers will find a detailed description of deposition and characterization of metal oxide thin films, theoretical treatment of select properties and their functional performance in solid state devices, from leading researchers. Scientists and engineers involved with oxide semiconductors, electronic materials and alternative energy will find Thin Film Metal-Oxides a useful reference.

AMORPHOUS OXIDE SEMICONDUCTORS A singular resource on amorphous oxide semiconductors edited by a world-recognized pioneer in the field In Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory, the Editors deliver a comprehensive account of the current status of—and latest developments in—transparent oxide semiconductor technology. With contributions from leading international researchers and exponents in the field, this edited volume covers physical fundamentals, thin-film transistor applications, processing, circuits and device simulation, display and memory applications, and new materials relevant to amorphous oxide semiconductors. The book makes extensive use of structural diagrams of materials, energy level and energy band diagrams, device structure illustrations, and graphs of device transfer characteristics, photographs and micrographs to help illustrate the concepts discussed within. It also includes: A thorough introduction to amorphous oxide semiconductors, including discussions of commercial demand, common challenges faced during their manufacture, and materials design Comprehensive explorations of the electronic structure of amorphous oxide semiconductors, structural randomness, doping limits, and defects Practical discussions of amorphous oxide semiconductor processing, including oxide materials and interfaces for application and solution-process metal oxide semiconductors for flexible electronics In-depth examinations of thin film transistors (TFTs), including the trade-off relationship between mobility and reliability in oxide TFTs Perfect for practicing scientists, engineers, and device technologists working with transparent semiconductor systems, Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory will also earn a place in the libraries of students studying oxides and other non-classical and innovative semiconductor devices. WILEY SID Series in Display Technology Series Editor: Ian Sage, Abelian Services, Malvern, UK The Society for Information Display (SID) is an international society which has the aim of encouraging the development of all aspects of the field of information display. Complementary to the aims of the society, the Wiley-SID series is intended to explain the latest developments in information display technology at a professional level. The broad scope of the series addresses all facets of information displays from technical aspects through systems and prototypes to standards and ergonomics.

Symposium R, "Oxide Semiconductors" was held December 1-6 at the 2013 MRS Fall Meeting in Boston, Massachusetts. Oxide semiconductors are poised to take a more active role in modern electronics, particularly in the field of thin film transistors. While many advances have been made in terms of our understanding of fundamental optical and electronic characteristics, there remain many questions in terms of defects, doping, and optimal growth/synthesis conditions. This symposium proceedings volume represents recent advances in growth and characterization of a number of different oxide semiconductors, as well as device fabrication.

Solution Processed Metal Oxide Thin Films for Electronic Applications discusses the fundamentals of solution processing materials chemistry techniques as they are applied to metal oxide materials systems for key device applications. The book introduces basic information (materials properties, materials synthesis, barriers), discusses ink formulation and solution processing methods, including sol-gel processing, surface functionalization aspects, and presents a comprehensive accounting on the electronic applications of solution processed metal oxide films, including thin film transistors, photovoltaic cells and other electronics devices and circuits. This is an important reference for those interested in oxide electronics, printed electronics, flexible electronics and large-area electronics. - Provides in-depth information on solution processing fundamentals, techniques, considerations and barriers combined with key device applications - Reviews important device applications, including transistors, light-emitting diodes, and photovoltaic cells - Includes an overview of metal oxide materials systems (semiconductors, nanomaterials and thin films), addressing materials synthesis, properties, limitations and surface aspects

Comprehensive resource reviewing fundamentals, device physics and reliability, fabrication processes, and numerous emerging applications of oxide thin film transistor technology over performing traditional thin film transistor technologies Oxide Thin Film Transistors book presents a comprehensive overview of oxide thin film transistor (TFT) science and technology, including fundamental material properties, device operation principles, modeling, fabrication processes, and applications. Split into four sections, the book first details oxide TFT materials including material parameters, and electrical and contact properties. The next section describes oxide TFT devices including designs, reliability, and comparison with other TFT types. The third part delves into the fabrication processes of oxide TFTs. The last section provides insight into existing and emerging applications of oxide TFTs including displays, imagers, circuits, sensors, flexible electronics, and circuits. Written by a team of well-reputed researchers in the field including the inventor of the IGZO TFT, Oxide Thin Film Transistors include information on: Electronic and crystal structure of widegap oxides, covering electronic structure of n- and p-type oxide semiconductors as well as doping limit and band alignment Device physics, covering operation principles, reliability, comparison with other TFT types, and high-frequency performance Fabrication processes, covering deposition methods, gate insulators, and passivation layers Applications, covering liquid crystal, light emitting diode, and electrophoretic displays, flexible electronics, imagers, and integrated circuits Oxide Thin Film Transistors is an ideal textbook resource for students who want to learn about oxide TFTs and a useful, up-to-date reference for researchers and engineers working on oxide TFTs and in related areas.

Transparent flexible electronics is an emerging technology which makes use of wide band gap semiconductors that can be processed at low temperatures on glass or plastic substrates. Electronic systems that cover large area and curved surfaces together with transparency bring the possibility of numerous applications that are outside the scope of rigid wafer based electronics. Flexible electronics, electronic textiles, a wearable wellness system, and sensory skin are some of the applications of flexible electronics. The key factor in the realization of transparent electronics is the development of high performance fully transparent thin film transistors. Thin film transistors (TFTs) based on transparent conducting amorphous oxide semiconductors (TAOS) such as InGaZnO (IGZO), zinc tin oxide (ZTO), zinc indium tin oxide (ZITO), etc. provide additional functionalities like transparency, high field effect mobility and potential for room temperature processing. The performance of these TAOS based TFTs are superior to their silicon (a-Si:H TFTs) and organic TFTs. Though there are monographs and books on a-Si:H TFTs and organic TFTs, a book on TAOS based TFTs is rare. This book introduces the graduate students and beginners to the field of amorphous semiconductors. The mass production of this kind of TFTs on large area substrates involves the complications associated with controlling the composition of oxide compound semiconductor thin film material. Pulsed laser deposition allows for the growth of an oxide semiconductor in a very high oxygen rich environment while co-sputtering is an effective technique for the growth of a multicomponent film and to control the film chemical composition in a systematic and easy way. These manufacturing aspects will be of interest to those working in the industry. The review on the n channel, p channel TFTs, and the detailed description on the extraction of various TFT parameters like the threshold voltage, field effect mobility, sub threshold slope and on-off ratio etc. will be ready reckoner to those working in the field of transparent electronics.

Ultra-wide Bandgap Semiconductors (UWBG) covers the most recent progress in UWBG materials, including sections on high-Al-content AlGaN, diamond, B-Ga2O3, and boron nitrides. The coverage of these materials is comprehensive, addressing materials growth, physics properties, doping, device design, fabrication and performance. The most relevant and important applications are covered, including power electronics, RF electronics and DUV optoelectronics. There is also a chapter on novel structures based on UWBG, such as the heterojunctions, the low-dimensional structures, and their devices. This book is ideal for materials scientists and engineers in academia and R&D searching for materials superior to silicon carbide and gallium nitride. - Provides a one-stop resource on the most promising ultra-wide bandgap semiconducting materials, including high-Al-content AlGaN, diamond, ß-Ga2O3, boron nitrides, and low-dimensional materials - Presents comprehensive coverage, from materials growth and properties, to device design, fabrication and performance - Features the most relevant applications, including power electronics, RF electronics and DUV optoelectronics

This book describes the application of c-axis aligned crystalline In-Ga-Zn oxide (CAAC-IGZO) technology in large-scale integration (LSI) circuits. The applications include Non-volatile Oxide Semiconductor Random Access Memory (NOSRAM), Dynamic Oxide Semiconductor Random Access Memory (DOSRAM), central processing unit (CPU), field-programmable gate array (FPGA), image sensors, and etc. The book also covers the device physics (e.g., off-state characteristics) of the CAAC-IGZO field effect transistors (FETs) and process technology for a hybrid structure of CAAC-IGZO and Si FETs. It explains an extremely low off-state current technology utilized in the LSI circuits, demonstrating reduced power consumption in LSI prototypes fabricated by the hybrid process. A further two books in the series will describe the fundamentals; and the specific application of CAAC-IGZO to LCD and OLED displays. Key features: • Outlines the physics and characteristics of CAAC-IGZO FETs that contribute to favorable operations of LSI devices. • Explains the application of CAAC-IGZO to LSI devices, highlighting attributes including low off-state current, low power consumption, and excellent charge retention. • Describes the NOSRAM, DOSRAM, CPU, FPGA, image sensors, and etc., referring to prototype chips fabricated by a hybrid process of CAAC-IGZO and Si FETs.