This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.

This book contains 18 invited contributions to the first Inter national Symposium on Order-Disorder Transformations in Alloys+. They cover the major aspects of this group of phase transformations. Although structural order-disorder transformations have been investigated for over 50 years the invited papers, the research papers - whose titles and authors are listed in the appendix - and the discussions at the Symposium have demonstrated very active continued interest and con siderable recent progress in the subject. This is true for theoretical work as weIl as for experimental studies and for the development of materials whose properties result from order-disorder transformations. + Some major national conferences on ordering were held in the USA and in the USSR in recent years; the proceedings are available in the following pUblications: Local Atomic Arrangements Studied by X-Ray Diffraction, Gordon & Breach, New York 1966 2 Ordered Alloys, Claitor's Publ. Div. , Baton Rouge, La. 1970 3 Summaries of the Proceedings of the 2nd Union Conference on Atomic Ordering and its Influence on the Properties of Alloys, Naukova Dumka, Kiev 1966 4 Atomic Ordering and its Influence on the Properties of Alloys, Naukova Dumka, Kiev 1968 5 Atomic Ordering and its Influence on the Properties of Alloys, TGU, Tomsk 1973 111 In assembling these papers it vas attempted to compile a systematic and approximately complete compendium of the sUbject.

The latest volume in the world renowned Solid State Physics series marks the fruition of Founding Editor David Turnbull's outstanding tenure as series editor. Volume 47 presents five articles written by leadingexperts on areas including crystal-melt interfacial tension, order-disorder transformation in alloys, brittle matrix composites, surfaces and interfaces, and magnetoresistance.

The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point

Decomposition of Alloys: The Early Stages contains the proceedings of the 2nd Acta-Scripta Metallurgica Conference held in Sonnenberg, Germany, on September 19-23, 1983. Contributors discuss the early stages of decomposition in alloys, placing emphasis on the unsolved problems of the field, rather than on the solved ones. This book has 36 chapters and opens with a discussion on developments in the theory of the kinetics of first-order phase transitions, followed by an analysis of metastability and spinodal nucleation; neutron scattering during decomposition of aluminum alloys; Ostwald ripening of precipitates; and phase stability under irradiation. The next chapters explore decomposition processes in Al-Zn alloys; thermal decomposition in Cu-Ni-Fe alloys; and the initial stages of discontinuous precipitation reactions. Other papers focus on the mechanisms of plate precipitate growth; spinodal decomposition and continuous ordering; and early stages of decomposition in Ni-Al single crystals. This monograph will be of interest to students and practitioners of physics and metallurgy.

This book deals with the phenomenological theory of first-order structural phase transitions, with a special emphasis on reconstructive transformations in which a group-subgroup relationship between the symmetries of the phases is absent. It starts with a unified presentation of the current approach to first-order phase transitions, using the more recent results of the Landau theory of phase transitions and of the theory of singularities. A general theory of reconstructive phase transitions is then formulated, in which the structures surrounding a transition are expressed in terms of density-waves, providing a natural definition of the transition order-parameters, and a description of the corresponding phase diagrams and relevant physical properties. The applicability of the theory is illustrated by a large number of concrete examples pertaining to the various classes of reconstructive transitions: allotropic transformations of the elements, displacive and order-disorder transformations in metals, alloys and related structures, crystal-quasicrystal transformations.

The effect of crystal and order-disorder transformations on friction and wear for Be-Co and FeCo alloys were studied in sliding friction experiments in vacuum at elevated temperatures. The results show that friction increases fourfold for the beryllium-cobalt alloy during transformation and that friction remains high until the reverse or cooling transformation occurs. The friction and wear of Be-Co are markedly superior to 440-C stainless steel. The order-disorder transformation in FeCo increases friction by a factor of 30 and also significantly increases wear. Increased sliding speed and loading affect the transformation. The friction behavior during heating is in good agreement with the type of order-temperature relation in FeCo.

This book is an eye-opening treatise on the fundamentals of the effects of radiation on metals and alloys. When energetic particles strike a solid, numerous processes occur that can change the physical and mechanical properties of the material. Metals and alloys represent an important class of materials that are subject to intense radiation fields. Radiation causes metals and alloys to swell, distort, blister, harden, soften and deform. This textbook and reference covers the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys.

Proceedings of the European Workshop on Ordering and Disordering held in Grenoble, France, 10-12 July 1991.

Solidification and Solid-State Transformations of Metals and Alloys describes solidification and the industrial problems presented when manufacturing structural parts by casting, or semi-products for forging, in order to obtain large, flat or specifically shaped parts. Solidification follows the nucleation and growth model, which will also be applied in solid-state transformations, such as those taking place because of changes in solubility and allotropy or changes produced by recrystallization. It also explains the heat treatments that, through controlled heating, holding and cooling, allow the metals to have specific structures and properties. It also describes the correct interpretation of phase diagrams so the reader can comprehend the behaviour of iron, aluminium, copper, lead, tin, nickel, titanium, etc. and the alloys between them or with other metallic or metalloid elements. This book can be used by graduate and undergraduate students, as well as physicists, chemists and engineers who wish to study the subject of Metallic Materials and Physical Metallurgy, specifically industrial applications where casting of metals and alloys, as well as heat treatments are relevant to the quality assurance of manufacturing processes. It will be especially useful for readers with little to no knowledge on the subject, and who are looking for a book that addresses the fundamentals of manufacturing, treatment and properties of metals and alloys. - Uses theoretical formulas to obtain realistic data from industrial operations - Includes detailed explanations of chemical, physical and thermodynamic phenomena to allow for a more accessible approach that will appeal to a wider audience - Utilizes micrographs to illustrate and demonstrate different solidification and transformation processes