This book shows amateur astronomers how to use one-shot CCD cameras, and how to get the best out of equipment that exposes all three color images at once. Because this book is specifically devoted to one-shot imaging, "One-Shot Color Astronomical Imaging" begins by looking at all the basics - what equipment will be needed, how color imaging is done, and most importantly, what specific steps need to be followed after the one-shot color images are taken. What is one-shot color imaging? Typically, astronomical cooled-chip CCD cameras record only one color at a time - rather like old-fashioned black & white cameras fitted with color filters. Three images are taken in sequence - in red, blue, and green light - and these are then merged by software in a PC to form a color image. Each of the three images must be taken separately through a suitable color filter, which means that the total exposure time for every object is more than tripled. When exposure times can run into tens of minutes or even hours for each of the three colors, this can be a major drawback for the time-pressed amateur. "One-Shot Color Astronomical Imaging" describes the most cost-effective and time-efficient way for any amateur astronomer to begin to photograph the deep-sky.

This book shows amateur astronomers how to use one-shot CCD cameras, and how to get the best out of equipment that exposes all three color images at once. Because this book is specifically devoted to one-shot imaging, "One-Shot Color Astronomical Imaging" begins by looking at all the basics - what equipment will be needed, how color imaging is done, and most importantly, what specific steps need to be followed after the one-shot color images are taken. What is one-shot color imaging? Typically, astronomical cooled-chip CCD cameras record only one color at a time - rather like old-fashioned black & white cameras fitted with color filters. Three images are taken in sequence - in red, blue, and green light - and these are then merged by software in a PC to form a color image. Each of the three images must be taken separately through a suitable color filter, which means that the total exposure time for every object is more than tripled. When exposure times can run into tens of minutes or even hours for each of the three colors, this can be a major drawback for the time-pressed amateur. "One-Shot Color Astronomical Imaging" describes the most cost-effective and time-efficient way for any amateur astronomer to begin to photograph the deep-sky.

Any amateur astronomer who is interested in astrophotography, particularly if just getting started, needs to know what objects are best for imaging in each month of the year. These are not necessarily the same objects that are the most spectacular or intriguing visually. The camera reveals different things and has different requirements. What objects in the sky tonight are large enough, bright enough, and high enough to be photographed? This book reveals, for each month of the year, the choicest celestial treasures within the reach of a commercial CCD camera. Helpful hints and advice on framing, exposures, and filters are included. Each deep sky object is explained in beautiful detail, so that observers will gain a richer understanding of these astronomical objects. This is not a book that dwells on the technology of CCD, Webcam, wet, or other types of astrophotography. Neither is it a book about in-depth computer processing of the images (although this topic is included). Detailed discussions of these topics can be found in other publications. This book focuses on what northern latitude objects to image at any given time of the year to get the most spectacular results.

This book provides a step-by-step guide of how anyone can capture and produce beautiful astronomical images, for beginners and professionals alike.

The book that taught thousands of people about astrophotography has been completely revised and updated in this second edition. It covers everything you need to know to capture stunning images of deep-sky objects with a DSLR or CCD camera: The fundamental concepts of imaging and their impact on the final image How to pick a telescope and camera How to get set up and take the images Where and when to find the best objects in the night sky How to process images using Adobe Photoshop(R) and PixInsight(R) Start-to-finish examples of image processing Full-color with over 300 illustrations.

First published in 1999, this much expanded and updated edition of the best-selling handbook Astrophotography for the Amateur provides a complete guide to taking pictures of stars, galaxies, the Moon, the Sun, comets, meteors and eclipses, using equipment and materials readily available to the hobbyist. In this new edition, the book has been completely revised and now includes new chapters on computer image processing and CCD imaging; expanded advice on choosing cameras and telescopes; completely updated information about the films; a much larger bibliography; and hundreds of new photographs (in colour, and black and white) demonstrating the latest equipment and techniques. Astrophotography for the Amateur has become the standard handbook for all amateur astronomers. This expanded and updated edition provides an ideal introduction for beginners and a complete handbook for advanced amateurs. It will also appeal to photography enthusiasts who can discover how to take spectacular images with only modest equipment.

This is the must-have guide for all amateur astronomers who double as makers, doers, tinkerers, problem-solvers, and inventors. In a world where an amateur astronomy habit can easily run into the many thousands of dollars, it is still possible for practitioners to get high-quality results and equipment on a budget by utilizing DIY techniques. Surprisingly, it's not that hard to modify existing equipment to get new and improved usability from older or outdated technology, creating an end result that can outshine the pricey higher-end tools. All it takes is some elbow grease, a creative and open mind and the help of Chung's hard-won knowledge on building and modifying telescopes and cameras. With this book, it is possible for readers to improve their craft, making their equipment more user friendly. The tools are at hand, and the advice on how to do it is here. Readers will discover a comprehensive presentation of astronomical projects that any amateur on any budget can replicate – projects that utilize leading edge technology and techniques sure to invigorate the experts and elevate the less experienced. As the "maker" community continues to expand, it has wonderful things to offer amateur astronomers with a willingness to get their hands dirty. Tweaking observing and imaging equipment so that it serves a custom purpose can take your observing options to the next level, while being fun to boot.

Amateur astronomy has changed beyond recognition in less than two decades. The reason is, of course, technology. Affordable high-quality telescopes, computer-controlled 'go to' mountings, autoguiders, CCD cameras, video, and (as always) computers and the Internet, are just a few of the advances that have revolutionized astronomy for the twenty-first century. Martin Mobberley first looks at the basics before going into an in-depth study of what’s available commercially. He then moves on to the revolutionary possibilities that are open to amateurs, from imaging, through spectroscopy and photometry, to patrolling for near-earth objects - the search for comets and asteroids that may come close to, or even hit, the earth. The New Amateur Astronomer is a road map of the new astronomy, equally suitable for newcomers who want an introduction, or old hands who need to keep abreast of innovations. From the reviews: "This is one of several dozen books in Patrick Moore's "Practical Astronomy" series. Amid this large family, Mobberley finds his niche: the beginning high-tech amateur. The book's first half discusses equipment: computer-driven telescopes, CCD cameras, imaging processing software, etc. This market is changing every bit as rapidly as the computer world, so these details will be current for only a year or two. The rest of the book offers an overview of scientific projects that serious amateurs are carrying out these days. Throughout, basic formulas and technical terms are provided as needed, without formal derivations. An appendix with useful references and Web sites is also included. Readers will need more than this book if they are considering a plunge into high-tech amateur astronomy, but it certainly will whet their appetites. Mobberley's most valuable advice will save the book's owner many times its cover price: buy a quality telescope from a reputable dealer and install it in a simple shelter so it can be used with as little set-up time as possible. A poor purchase choice and the hassle of setting up are why most fancy telescopes gather dust in their owners' dens. Summing Up: Highly recommended. General readers; lower- and upper-division undergraduates."( T. D. Oswalt, CHOICE, March 2005)

Choosing and Using the New CAT will supersede the author’s successful Choosing and Using a Schmidt-Cassegrain Telescope, which has enjoyed enthusiastic support from the amateur astronomy community for the past seven years. Since the first book was published, a lot has changed in the technology of amateur astronomy. The sophistication and variety of the telescopes available to amateurs has increased dramatically. Computerized SCTs, Maksutov-Cassegrains, and most recently Meade’s new and acclaimed Ritchey-Chrétiens have come to dominate the market. That means that all amateurs considering the purchase of a new telescope (not only a SCT, and not just beginners) will benefit from this detailed guide. Choosing the right telescope for particular kinds of observation (or even for general work) is far from easy – but Rod Mollise gives invaluable advice and guidance.

This book offers a comprehensive introductory guide to "choosing and using" a series LXD55 or LXD75 computer-controlled ("goto") telescope, containing a wealth of useful information for both beginners and more advanced practical amateur astronomers. The manufacturer’s manuals are not nearly detailed enough to be of real help to beginners. No other book offers advanced techniques for more experienced LXD series users.