The Construction Chart Book presents the most complete data available on all facets of the U.S. construction industry: economic, demographic, employment/income, education/training, and safety and health issues. The book presents this information in a series of 50 topics, each with a description of the subject matter and corresponding charts and graphs. The contents of The Construction Chart Book are relevant to owners, contractors, unions, workers, and other organizations affiliated with the construction industry, such as health providers and workers compensation insurance companies, as well as researchers, economists, trainers, safety and health professionals, and industry observers.

Despite occupational diseases in construction contributing to a significant proportion of fatalities, and permanent and temporary incapacities, they have not gained as much attention as occupational injuries from practitioners and researchers. The research in this book aims to discover occupational diseases that cause fatalities and permanent and temporary incapacities in the construction industry, along with their epidemiological causal mechanisms. Through chapters examining cancers, circulatory system diseases, respiratory system diseases, nervous system and sense organ diseases, and musculoskeletal diseases, the authors provide new knowledge and insights to help proactively prevent and control these diseases. The research underpinning the development of the book applies empirical analyses of real-world occupational disease data for the construction industry alongside a detailed review and meta-analysis of literature pertinent to risk factors and methods and strategies to prevent and/or control occupational diseases in construction. Knowing the riskiest diseases and occupations for construction workers, along with organisational and personal risk factors, is critical to optimising risk management efforts. This book should be of interest to students, researchers, and practitioners in construction management, occupational health and safety, and risk management.

This book addresses an increasingly important area in the construction industry. Case studies are used extensively to illustrate important points and refer to current successful safety management techniques.

This book gathers peer-reviewed contributions presented at the 3rd National Conference on Structural Engineering and Construction Management (SECON’19), held in Angamaly, Kerala, India, on 15-16 May 2019. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.

Despite many advances, 20 American workers die each day as a result of occupational injuries. And occupational safety and health (OSH) is becoming even more complex as workers move away from the long-term, fixed-site, employer relationship. This book looks at worker safety in the changing workplace and the challenge of ensuring a supply of top-notch OSH professionals. Recommendations are addressed to federal and state agencies, OSH organizations, educational institutions, employers, unions, and other stakeholders. The committee reviews trends in workforce demographics, the nature of work in the information age, globalization of work, and the revolution in health care deliveryâ€"exploring the implications for OSH education and training in the decade ahead. The core professions of OSH (occupational safety, industrial hygiene, and occupational medicine and nursing) and key related roles (employee assistance professional, ergonomist, and occupational health psychologist) are profiled-how many people are in the field, where they work, and what they do. The book reviews in detail the education, training, and education grants available to OSH professionals from public and private sources.

The workplace is where 156 million working adults in the United States spend many waking hours, and it has a profound influence on health and well-being. Although some occupations and work-related activities are more hazardous than others and face higher rates of injuries, illness, disease, and fatalities, workers in all occupations face some form of work-related safety and health concerns. Understanding those risks to prevent injury, illness, or even fatal incidents is an important function of society. Occupational safety and health (OSH) surveillance provides the data and analyses needed to understand the relationships between work and injuries and illnesses in order to improve worker safety and health and prevent work-related injuries and illnesses. Information about the circumstances in which workers are injured or made ill on the job and how these patterns change over time is essential to develop effective prevention programs and target future research. The nation needs a robust OSH surveillance system to provide this critical information for informing policy development, guiding educational and regulatory activities, developing safer technologies, and enabling research and prevention strategies that serves and protects all workers. A Smarter National Surveillance System for Occupational Safety and Health in the 21st Century provides a comprehensive assessment of the state of OSH surveillance. This report is intended to be useful to federal and state agencies that have an interest in occupational safety and health, but may also be of interest broadly to employers, labor unions and other worker advocacy organizations, the workers' compensation insurance industry, as well as state epidemiologists, academic researchers, and the broader public health community. The recommendations address the strengths and weaknesses of the envisioned system relative to the status quo and both short- and long-term actions and strategies needed to bring about a progressive evolution of the current system.

211 men died in the construction industry in the three year period 2005-06 to 2007-08. This "unacceptable level of fatalities" led to the commissioning of this inquiry, though Rita Donaghy remarks that there is no public sense of shock at the regular toll of fatalities in the industry and there is a need to raise the profile of these tragedies so that a construction fatality becomes socially unacceptable. The construction industry generally is modelled to provide maximum flexibility. Consequently the majority of functions are contracted out and at least 40 per cent of workers are self-employed or in the Construction Industry Scheme. The advantages are obvious in that it reduces overheads and some commentators argue that it improves profitability and productivity. The disadvantages are that it becomes more difficult for a safety culture to flourish, worker engagement is weak, employment security and continuity is minimal and skills training is at best patchy. The findings of the Review's investigation of a number of case studies reveal a combination of factors for each fatal accident of which the most frequently cited are: (a) the incidence of training factors, experience; (b) information and advice deficiencies; (c) risk perception; (d) rescheduling of work without planning; (e) minor / one-off jobs; (f) compliance; (g) equipment operability, space, personal protective equipment (PPE) issues and tools not designed to fit the user / task. 28 recommendations are made.

The practical recommendations in this publication reflect the changes that have taken place in the iron and steel industry over the last 20 years or so, and changes to the ILO's approach to developing codes of practice. A leaner, flexible, more highly skilled workforce, new technology and a less prescriptive, more systems-oriented approach to addressing safety and health are reflected in the revised Code. It is intended to provide guidance to ILO constituents and all those responsible for addressing safety and health throughout the iron and steel industry. The general provisions of the Code cover: general responsibilities, duties and rights; the legal framework; safety and health management; reporting, recording and notification of work-related injuries and diseases, ill health and incidents and health services. Guidance on industry-specific prevention and protection includes: furnaces and ovens, foundries; handling molten material; rolling mills and coating lines; and recycling. There are also sections on: competence and training; personal protection; emergency preparedness; and welfare. Annexes to the Code include: workers' health surveillance; surveillance of the working environment; occupational exposure limits; and chemicals used in the iron and steel industry. This code replaces an earlier code that was adopted in 1981.

Musculoskeletal disorders (MSDs) are the most common work-related problem in Europe - 25% of the EU-27 workers report suffering from backache and 23% complain about muscular pains. First, there are preventive steps that have to be taken. But for workers who already have MSDs, the challenge is to maintain their employability, keep them working and, if necessary, reintegrate them into the workplace. The aim of this report is to evaluate the effectiveness of interventions at the workplace and to provide practical examples with respect to successful prevention of MSDs. It focuses mainly on the developments that have taken place since the previous European MSDs Campaign in 2000.