Following in the lineage of Adsorption by Carbons (Bottani & Tascon, 2008), this work explores current research within contemporary novel carbon adsorbents. Both basic and applied aspects are discussed for this important class of materials. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. Encompasses fundamental science of adsorption by carbons, in one location, supporting current R&D without extensive literature review Describes adsorption as it is currently applied to major novel types of carbon materials, including carbon gels, carbide-derived carbons, zeolite-templated carbvons, hydrothermal carbons, carbon nanohorns and graphene Specific discussion of fuel storage, environmental remediation and biomedical applications, of contemporary interest to many surface chemists and applications-focused researchers

Following in the lineage of Adsorption by Carbons (Bottani & Tascon, 2008), this work explores current research within contemporary novel carbon adsorbents. Both basic and applied aspects are discussed for this important class of materials. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - Encompasses fundamental science of adsorption by carbons, in one location, supporting current R&D without extensive literature review - Describes adsorption as it is currently applied to major novel types of carbon materials, including carbon gels, carbide-derived carbons, zeolite-templated carbvons, hydrothermal carbons, carbon nanohorns and graphene - Specific discussion of fuel storage, environmental remediation and biomedical applications, of contemporary interest to many surface chemists and applications-focused researchers

Adsorption promises to play an integral role in several future energy and environmental technologies, including hydrogen storage, CO removal for fuel cell technology, desulfurization of transportation fuels, and technologies for meeting higher standards on air and water pollutants. Ralph Yang's Adsorbents provides a single and comprehensive source of knowledge for all commercial and new sorbent materials, presenting the fundamental principles for their syntheses, their adsorption properties, and their present and potential applications for separation and purification. Chapter topics in this authoritative, forward-looking volume include: - Formulas for calculating the basic forces or potentials for adsorption - Calculation of pore-size distribution from a single adsorption isotherm - Rules for sorbent selection - Fundamental principles for syntheses/preparation, adsorption properties, and applications of commercially available sorbents - Mesoporous molecular sieves and zeolites - ̧-complexation sorbents and their applications - Carbon nanotubes, pillared clays, and polymeric resins Yang covers the explosion in the development of new nanoporous materials thoroughly, as the adsorption properties of some of these materials have remained largely unexplored. The whole of this book benefits from the new adsorbent designs made possible by the increase in desktop computing and molecular simulation, making Adsorbents useful to both practicing laboratories and graduate programs. Ralph Yang's comprehensive study contributes significantly to the resolution of separation and purification problems by adsorption technologies.

The deterioration of water quality and unavailability of drinkable water are pressing challenges worldwide. The removal of toxic organic and inorganic pollutants from water is vital for a clean environment, as a response to water scarcity. Adsorption-based water technologies are among the most widely used because of their high efficiency and low cost, without relying on a complex infrastructure. In recent years, carbon nanomaterials (CNMs), such as graphene and derivatives, carbon nanotubes, carbon nanofibers, nanoporous carbon, fullerenes, graphitic carbon nitride, and nanodiamonds have been extensively exploited as adsorbents due to their extraordinary surface properties, ease of modification, large surface area, controlled structural varieties, high chemical stability, porosity, low density, ease of regeneration, and reusability. This book provides a thorough overview of the state of the art in carbon nanomaterials as they are used for adsorption applications in water purifications, as well as addressing their toxicological challenges. This volume primarily explores the fundamentals of adsorption, its mechanical aspects, synthesis and properties of CNMs, and adsorption performances of CNMs and their nanocomposites with organic and inorganic materials. Structural engineering and activation processes produce materials with enhanced adsorptive properties and separation efficiencies. Furthermore, the formation of CNMs with 2D and 3D macro-and microstructures and high porosities is a potential approach to improve adsorption performances and extend CNM use at the industrial level. The book also addresses important issues regarding these adsorbents that potentially affect future research and industrial applications of carbon-based nanoadsorbents in water security. - Presents advances in multifunctional 3D superstructures of carbon nanomaterials and their composites for adsorption applications - Outlines the fundamentals on synthesis and characterization techniques of carbon-based nanostructures and their composites - Assesses the major toxicological challenges in using nanostructured materials as adsorbents for water purification

Adsorption by Carbons covers the most significant aspects of adsorption by carbons, attempting to fill the existing gap between the fields of adsorption and carbonaceous materials. Both basic and applied aspects are presented. The first section of the book introduces physical adsorption and carbonaceous materials, and is followed by a section concerning the fundamentals of adsorption by carbons. This leads to development of a series of theoretical concepts that serve as an introduction to the following section in which adsorption is mainly envisaged as a tool to characterize the porous texture and surface chemistry of carbons. Particular attention is paid to some novel nanocarbons, and the electrochemistry of adsorption by carbons is also addressed. Finally, several important technological applications of gas and liquid adsorption by carbons in areas such as environmental protection and energy storage constitute the last section of the book. - The first book to address the interplay between carbonaceous materials and adsorption - Includes important environmental applications, such as the removal of volatile organic compounds from polluted atmospheres - Covers both gas-solid and liquid-solid adsorption

Composite Nanoadsorbents discusses the most recent advances in the field, including promising techniques for waste water decontamination and the advantages and drawbacks of nanoadsorbents in these applications. The implications of nanoadsorbents to public health and future developments for facilitating environmental sustainability are also discussed. New approaches for nanomaterials are analyzed, focusing on the effect of nanotechnology in adsorption applications. The effectiveness of nanosized materials is evaluated, along with cost factors and new synthesis routes of composite nanomaterials. Combining the areas of nanotechnology, adsorption, and composite surface chemistry, the synthesis, modifications and applications of nanotechnology in the adsorption process are demonstrated. Edited by a prolific expert in the field, this book will be a valuable resource for researchers, postgraduate students and professionals in the fields of nanotechnology, adsorption and materials synthesis. - Bridges the gap between theory and application of composite nanoadsorbents - Provides an understanding of the benefits of nanoadsorbents and their cost, efficiency and novelty - Includes material on inorganic nanoadsorbents and carbon nanotubes

Use of Adsorbents for the Removal of Pollutants from Wastewater describes the most commonly occurring industrial effluents, and presents direct means and methodologies for treating them. In addition to its excellent introduction to pollutants, this book contains all of the basics you need for understanding the characteristics and applications of adsorbent materials. With this book, you can choose from a wide variety of traditional and novel adsorbents, including alternative, relatively inexpensive adsorbents.

High surface area, a microporous structure, and a high degree of surface reactivity make activated carbons versatile adsorbents, particularly effective in the adsorption of organic and inorganic pollutants from aqueous solutions. Activated Carbon Adsorption introduces the parameters and mechanisms involved in the activated carbon adsorption

Char and Carbon Materials Derived from Biomass: Production, Characterization and Applications provides an overview of biomass char production methods (pyrolysis, hydrothermal carbonization, etc.), along with the characterization techniques typically used (Scanning Electronic Microscopy, X-Ray Fluorescence, Nitrogen adsorption, etc.) In addition, the book includes a discussion of the various properties of biomass chars and their suitable recovery processes, concluding with a demonstration of applications. As biomass can be converted to energy, biofuels and bioproducts via thermochemical conversion processes, such as combustion, pyrolysis and gasification, this book is ideal for professionals in energy production and storage fields, as well as professionals in waste treatment, gas treatment, and more. - Provides a discussion of sources of biomass feedstocks, such as agricultural, woody plants and food processing residue - Discusses the various production processes of biomass chars, including pyrolysis and hydrothermal carbonization - Explores various applications of biomass chars within different industries, including energy and agronomy

There has been a lack of authoritative, current information on the structure, investigation and preparation of inorganic sorbents, their numerous applications as well as the adsorption from gaseous and liquid phases on new and chemically modified inorganic solids. This volume deals with the above-mentioned themes and presents 34 up-to-date comprehensive and critical reviews written by well-recognized authorities. The sorbents discussed are primarily mineral ones. Each contribution treats a problem critically by showing its development, presenting documentation on the state-of-the-art and identifying subjects for further research. The book will be of interest to researchers in academic institutes and industrial laboratories engaged in the fields of surface chemistry, inorganic chemistry, adsorption, ion-exchange, catalysis, chromatography and spectroscopy of the surface phenomena, as well as to students attending graduate and postgraduate courses.