Ninth Symposium (International) on Combustion covers the proceedings of the Ninth Symposium (International) on Combustion, held at Cornell University in Ithaca, New York on August 27 to September 1, 1962, under the auspices of the Combustion Institute. The book focuses on the processes and reactions involved in combustion. The selection first offers information on flame strength of propane-oxygen flames at low pressures in turbulent flow and mixing and flow in ducted turbulent jets. Topics include radial profile of the jetting velocity, radial growth of the jet, and mixing zones of a ducted jet. The text then elaborates on turbulent flame studies in two-dimensional open burners; turbulent mass transfer and rates of combustion in confined turbulent flames; and flame stabilization in a boundary layer. The publication examines the theoretical study of properties of laminar steady state flames as a function of properties of their chemical components and spectra of alkali metal-organic halide flames. The text then takes a look at the thermal radiation theory for plane flame propagation in coal dust clouds; flame characteristics of the diborane-hydrazine system; and studies of the combustion of dimethyl hydrazine and related compounds. The selection is a dependable reference for readers interested in the processes and reactions involved in combustion.

Volume 1 covers the most important technological aspects of the use of molecular oxygen for catalytic oxidation reactions.Volume 2 addresses the safety issues associated with the use of oxygen in catalytic oxidation reactions.Contents Vol. 1: 1. Introduction. 2. Chemical-physical properties of molecular oxygen. 3. Oxygen production technologies. 4. Chemical fundamentals of oxidation reactions. 5. Reactor technologies for multiphase systems. 6. Liquid phase oxidations. 7. Gas phase selective oxidations. 8. Selective oxidation of paraffins. References. Index. Vol. 2: 9. Introduction to safety problems in the chemical industry. 10. Chemical aspects of combustion in the gaseous phase. 11. Homogeneous chemical explosions: autoignition or spontaneous ignition. 12. Deflagration or propagation of flame. 13. Conditions governing flame propagation capability. 14. Detonation in the gaseous phase. 15. Prevention of and protection against explosions. References. Index.

Dust Explosion Dynamics focuses on the combustion science that governs the behavior of the three primary hazards of combustible dust: dust explosions, flash fires, and smoldering. It explores the use of fundamental principles to evaluate the magnitude of combustible dust hazards in a variety of settings. Models are developed to describe dust combustion phenomena using the principles of thermodynamics, transport phenomena, and chemical kinetics. Simple, tractable models are described first and compared with experimental data, followed by more sophisticated models to help with future challenges. Dr. Ogle introduces the reader to just enough combustion science so that they may read, interpret, and use the scientific literature published on combustible dusts. This introductory text is intended to be a practical guide to the application of combustible dust models, suitable for both students and experienced engineers. It will help you to describe the dynamics of explosions and fires involving dust and evaluate their consequences which in turn will help you prevent damage to property, injury and loss of life from combustible dust accidents. - Demonstrates how the fundamental principles of combustion science can be applied to understand the ignition, propagation, and extinction of dust explosions - Explores fundamental concepts through model-building and comparisons with empirical data - Provides detailed examples to give a thorough insight into the hazards of combustible dust as well as an introduction to relevant scientific literature

Progress in High Temperature Physics and Chemistry

This book presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD 2020). The contents focus on latest research and current problems in various branches of mechanical engineering. Some of the topics discussed here include fracture and failure analysis, fuels and alternative fuels, combustion and IC engines, advanced manufacturing technologies, powder metallurgy and rapid prototyping, industrial engineering and automation, supply chain management, design of mechanical systems, vibrations and control engineering, automobile engineering, fluid mechanics and machines, heat transfer, composite materials, micro and nano-engineering for energy storage and conversion, and modeling and simulations. The wide range of topics presented in this book can make it useful for beginners, researchers as well as professionals in mechanical engineering.