Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.

This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. ​ It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.

The transformation towards electric mobility requires the highest quality mass production of battery cells. However, few research in battery cell engineering focus beyond new cell chemistries. As a consequence, there exists a huge gap between basic battery research and comparable scientific approaches to battery cell production. This handbook bridges the gap between basic electrochemical battery cell research and battery cell production approaches.To run lithium-ion battery gigafactories successfully and sustainably, high-quality battery cell production processes and systems are required. The Handbook on Smart Battery Cell Manufacturing provides a comprehensive and well-structured analysis of every aspect of the manufacturing process of smart battery cell, including upscaling battery cell production, accompanied by many instructive practical examples of the digitalization of battery products and manufacturing systems using an integrated life cycle perspective.

The book presents an integrated planning concept for heat flows in production systems comprising various short term and long term related models. Detailed explanations about the modeling and implementation of all relevant system elements such as generic and specific machines types, technical building services (TBS), production planning and control aspects, heat storage units and (waste) heat designs follow. Due to resulting amounts of data, the concept foresees system level appropriate indicators and visualizations for a facilitatedevaluation of the model results. An application procedure embeds and describes all models as well.Three exemplary application cases demonstrate the applicability, including the manufacturing of shafts for automotive transmissions, a cooling water system and an academic learning environment.

This book includes the introduction of emerging manufacturing technologies and planning cases with established technologies. The planning of eco-efficient process chains is crucial for manufacturing companies. However, in the state-of-the-art planning, various barriers exist towards the integration of the environmental dimension. Against this background, a concept for the integration of classic lean and environmental criteria into the three planning phases of process chains is presented. During concept planning, the Technology Assessment Tool supports planners in the identification of eco-efficient technologies. During rough planning, the Value Stream Design Tool enables the derivation of a production line based on workpiece characteristics. For detailed planning, tools for eco-efficient machine and process chain configuration are provided. Three case studies from large-scale automotive component manufacturing with established and emerging technologies demonstrate the tool applicability.

This book presents a concept for fostering resource efficient manufacturing. The protection of our environment demands a more responsible use of natural resources, and a higher degree of transparency along manufacturing value chains will be required in order to make significant advances in this context. Industrial decision makers must be provided with adequate methods and tools to simultaneously and systematically pursue technical, economic and environmental targets. Building on established and complementary methods, such as material and energy flow analysis (MEFA), value stream mapping (VSM), life cycle costing (LCC) and environmental life cycle assessment (LCA), this book introduces a concept that allows a holistic modeling and multi-dimensional performance assessment of manufacturing systems on different levels – from processes up to entire value chains and product life cycles. It also demonstrates the application of the concept using two case studies from the metal mechanic industry.

The environmental burden caused by private transportation represents a significant challenge towards sustainability. Electric vehicles are considered a key technology to reduce the environmental impact caused by the mobility sector. However, the global adoption of electromobility implies shift and diversification of the environmental impacts caused by the transportation sector mainly driven by the production of the battery system. Modeling the life cycle environmental impacts of traction batteries is a time demanding and interdisciplinary task as it involves a high variability and requires an in-depth knowledge of the product system under analysis. To face these challenges, an Integrated Computational Life Cycle Engineering ICLCE framework for EVs has been developed. The ICLCE framework described aims at supporting fast and comprehensive modelling of complex foreground systems in the electromobility field and their interaction with diverse backgrounds and partial contexts.

This book comprises the proceedings of the conference “Future Automotive Production 2022”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.

This open access book comprehensively consolidates studies in the rapidly emerging field of battery management. The primary focus is to overview the new and emerging data science technologies for full-lifespan management of Li-ion batteries, which are categorized into three groups, namely (i) battery manufacturing management, (ii) battery operation management, and (iii) battery reutilization management. The key challenges, future trends as well as promising data-science technologies to further improve this research field are discussed. As battery full-lifespan (manufacturing, operation, and reutilization) management is a hot research topic in both energy and AI fields and none specific book has focused on systematically describing this particular from a data science perspective before, this book can attract the attention of academics, scientists, engineers, and practitioners. It is useful as a reference book for students and graduates working in related fields. Specifically, the audience could not only get the basics of battery manufacturing, operation, and reutilization but also the information of related data-science technologies. The step-by-step guidance, comprehensive introduction, and case studies to the topic make it accessible to audiences of different levels, from graduates to experienced engineers.

The conference addresses general topics on how products and materials can be recycled and looks for application examples. The focus is on the areas: · Material and Energy Flow Assessment · Sustainable Mobility · Industrial Ecology with a focus on renewable energy sources or WEEE · (Re-) Manufacturing · Cascade Use and Waste Management 4.0