The book focuses on two issues related to mathematical and numerical modelling of flow in unsaturated porous media. In the first part numerical solution of the governing equations is discussed, with particular emphasis on the spatial discretization of highly nonlinear permeability coefficient. The second part deals with large scale flow in heterogeneous porous media of binary structure. Upscaled models are developed and it is shown that the presence of material heterogeneities may give rise to additional non-equilibrium terms in the governing equations or to hysteresis in the averaged constitutive relationships.

In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use, and contamination. To face the challenge, good planning and management practices are needed. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface. The purpose of this book is to construct conceptual and mathematical models that can provide the information required for making decisions associated with the management of groundwater resources, and the remediation of contaminated aquifers. The basic approach of this book is to accurately describe the underlying physics of groundwater flow and solute transport in heterogeneous porous media, starting at the microscopic level, and to rigorously derive their mathematical representation at the macroscopic levels. The well-posed, macroscopic mathematical models are formulated for saturated, single phase flow, as well as for unsaturated and multiphase flow, and for the transport of single and multiple chemical species. Numerical models are presented and computer codes are reviewed, as tools for solving the models. The problem of seawater intrusion into coastal aquifers is examined and modeled. The issues of uncertainty in model input data and output are addressed. The book concludes with a chapter on the management of groundwater resources. Although one of the main objectives of this book is to construct mathematical models, the amount of mathematics required is kept minimal.

Modeling of flow and transport in groundwater has become an important focus of scientific research in recent years. Most contributions to this subject deal with flow situations, where density and viscosity changes in the fluid are neglected. This restriction may not always be justified. The models presented in the book demonstrate immpressingly that the flow pattern may be completely different when density changes are taken into account. The main applications of the models are: thermal and saline convection, geothermal flow, saltwater intrusion, flow through salt formations etc. This book not only presents basic theory, but the reader can also test his knowledge by applying the included software and can set up own models.

Only book world-wide addressing this topic. The principal output of the European co-operative Action on "Water Movements in Road Pavements & Embankments". Provides unique guidance on assessing water condition and its affects on road performance. Provides unique guidance on assessing and ameliorating contaminant movement in pavement groundwater. Written by leading experts in Europe.

The Green element method (GEM) is a novel approach of implementing in an element-by-element fashion the singular boundary integral theory, thereby enhancing the capabilities of the theory in terms of ease in solving nonlinear problems, adapting to heterogeneous problems, and achieving spareness in the global coefficient matrix. By proceeding in this manner, GEM provides solutions to linear, nonlinear, steady and transient engineering problems in one- and two-dimensional domains, some of which hitherto could not be handled by the boundary integral theory. The primary motivation for the Green element method, therefore, lies in the enhancement of the computational capabilities that it has given to the boundary element theory. The main objectives of this text are to serve as an instructional material to senior undergraduate and first-year graduate students undertaking a course in computational methods and their applications to engineering problems, and as a resource material for research scientists, applied mathematicians, numerical analysts, and engineers who may wish to take these ideas to new frontiers and applications. To enhance the feel for the method, exercises are presented at the end of some of the chapters, and sample data can be run with the executable program GEMLN1D that can be accessed either at: www.nust.ac.zw/aetaigbenu/gem/GEMLN1D or: www.lafetech.com/gem/GEMLN1D.

Fluid flow and solute transport within the vadose zone, the unsaturated zone between the land surface and the water table, can be the cause of expanded plumes arising from localized contaminant sources. An understanding of vadose zone processes is, therefore, an essential prerequisite for cost-effective contaminant remediation efforts. In addition, because such features are potential avenues for rapid transport of chemicals from contamination sources to the water table, the presence of fractures and other channel-like openings in the vadose zone poses a particularly significant problem, Conceptual Models of Flow and Transport in the Fractured Vadose Zone is based on the work of a panel established under the auspices of the U.S. National Committee for Rock Mechanics. It emphasizes the importance of conceptual models and goes on to review the conceptual model development, testing, and refinement processes. The book examines fluid flow and transport mechanisms, noting the difficulty of modeling solute transport, and identifies geochemical and environmental tracer data as important components of the modeling process. Finally, the book recommends several areas for continued research.

The groundwater science and engineering has been closely connected with various fields (1) Groundwater Hydrology, (2) Groundwater Hydraulics or Geohydraulics, (3) Fluid Dynamics in Porous Media, (4) Groundwater Quality Engineering, (5) Soil Physics, and (6) Hydrogeology or Geohydrology. The purpose of the book is to present an update textbook of groundwater hydraulics, which includes all of basic items in above-mentioned fields, to students (of graduate school), researchers and practitioners. The students and beginners who intend to specialize in groundwater hydraulics through one semester will master contents of the book.

Subsurface flow problems are inherently multiscale in space due to the large variability of material properties and in time due to the coupling of many different physical processes, such as advection, diffusion, reaction and phase exchange. Subsurface flow models still need considerable development. For example, nonequilibrium effects, entrapped air, anomalous dispersion and hysteresis effects can still not be adequately described. Moreover, parameters of the models are diffcult to access and often uncertain. Computational issues in subsurface flows include the treatment of strong heterogeneities and anisotropies in the models, the effcient solution of transport-reaction problems with many species, treatment of multiphase-multicomponent flows and the coupling of subsurface flow models to surface flow models given by shallow water or Stokes equations. With respect to energy and the environment, in particular the modelling and simulation of radioactive waste management and sequestration of CO2 underground have gained high interest in the community in recent years. Both applications provide unique challenges ranging from modelling of clay materials to treating very large scale models with high-performance computing. This book brings together key numerical mathematicians whose interest is in the analysis and computation of multiscale subsurface flow and practitioners from engineering and industry whose interest is in the applications of these core problems.

This book integrates principles of flow through porous media with stochastic analyses, for advanced-level students, researchers and professionals in hydrogeology and hydraulics.

This second edition is extensively revised throughout with expanded discussion of modeling fundamentals and coverage of advances in model calibration and uncertainty analysis that are revolutionizing the science of groundwater modeling. The text is intended for undergraduate and graduate level courses in applied groundwater modeling and as a comprehensive reference for environmental consultants and scientists/engineers in industry and governmental agencies. - Explains how to formulate a conceptual model of a groundwater system and translate it into a numerical model - Demonstrates how modeling concepts, including boundary conditions, are implemented in two groundwater flow codes-- MODFLOW (for finite differences) and FEFLOW (for finite elements) - Discusses particle tracking methods and codes for flowpath analysis and advective transport of contaminants - Summarizes parameter estimation and uncertainty analysis approaches using the code PEST to illustrate how concepts are implemented - Discusses modeling ethics and preparation of the modeling report - Includes Boxes that amplify and supplement topics covered in the text - Each chapter presents lists of common modeling errors and problem sets that illustrate concepts