The aftermath of the San Fernando, Whittier, and Loma Prieta slip-strike earthquakes in 1971, 1987, and 1989, respectively, showed the inadequacy of pre-1971 reinforced concrete bridge columns and led to extensive research in the United States on seismic retrofitting of these columns. Providing steel jackets around the columns was determined to be effective in increasing lateral deformation capacity under seismic demand. The jacket can confine the concrete, such that failure occurs due to fatigue fracture of longitudinal reinforcement. Previous research did not focus specifically on behavior under long-duration subduction zone earthquakes, which can increase the likelihood of fatigue fracture relative to strike-slip earthquakes. This study focuses on behavior under demands from both strike slip and long-duration earthquakes. In this research, an analytical model of a steel jacket retrofitted reinforced concrete bridge column was developed in OpenSEES. The model consisted of a linear elastic element for the jacketed portion of the column, a fiber section to capture plasticity at the gap between the bottom of the steel jacket and top of the footing, and zero-length bond slip elements at the column-footing interface and the bottom of the jacket. The OpenSEES model was used in combination with a fatigue model to predict the fatigue failure of the longitudinal reinforcement. The column model was validated using ten test columns. This included four columns with loading protocols more reflective of strike-slip earthquakes and six columns with loading protocols reflective of long duration demands.

Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.

fib Bulletin 35 is the first bulletin to publish documentation from an fib short course. These courses are held worldwide and cover advanced knowledge of structural concrete in general, or specific topics. They are organized by fib and given by internationally recognized experts in fib, often supplemented with local experts active in fib. They are based on the knowledge and expertise from fib's ten Commissions and nearly fifty Task Groups. fib Bulletin 35 presents the course materials developed for the short course "Retrofitting of Concrete Structures through Externally Bonded FRP, with emphasis on Seismic Applications", given in Ankara and Istanbul in June 2005. The course drew on expertise both from outside Turkey and from the large pool of local experts on this subject. In most countries of the world, the building stock is ageing and needs continuous maintenance or repair. Moreover, the majority of existing constructions are deficient in the light of current knowledge and design codes. The problem of structural deficiency of existing constructions is especially acute in seismic regions, as, even there, seismic design of structures is relatively recent. The direct and indirect costs of demolition and reconstruction of structurally deficient constructions are often prohibitive; furthermore they entail a substantial waste of natural resources and energy. Therefore, structural retrofitting is becoming increasingly widespread throughout the world. Externally bonded Fibre Reinforced Polymers (FRPs) are rapidly becoming the technique of choice for structural retrofitting. They are cleaner and easier to apply than conventional retrofitting techniques, reduce disruption to the occupancy and operation of the facility, do not generate debris or waste, and reduce health and accident hazards at the construction site as well as noise and air pollution in the surroundings. fib Bulletin 35 gives state-of-the-art coverage of retrofitting through FRPs and presents relevant provisions from three recent standardisation milestones: EN 1998-3:2005 "Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings", the 2005 Draft of the Turkish seismic design code, and the Italian regulatory document CNR-DT 200/04, "Instructions for Design, Execution and Control of Strengthening Interventions by Means of Fibre-Reinforced Composites" (2004).

This volume presents select proceedings of the International Conference on Innovative Technologies for Clean and Sustainable Development (ICITCSD – 2021), held at the National Institute of Technical Teachers Training & Research and Chitkara University, Himachal Pradesh, India. It covers several important aspects of sustainable civil engineering practices, dealing with effective waste and material management, natural resources, industrial products, energy, food, transportation and shelter, environmental impact mitigation, waste minimization and management, sustainable infrastructure, and geospatial technology for sustainable and clean environment. Emphasis is placed on conserving and protecting the environment and the natural resource base essential for future development. The book includes case studies and ongoing research work from various fields related to civil engineering presented by academicians, scientists, and researchers. The book also discusses engineering solutions to sustainable development and green design issues. Special emphasis is given on qualitative guidelines for the generation, treatment, handling, transport, disposal, and recycling of wastes. The book is intended as a practice-oriented reference guide for researchers and practitioners. It will be useful for anyone working in sustainable civil engineering and related fields.

Strengthening Design of Reinforced Concrete with FRP establishes the art and science of strengthening design of reinforced concrete with fiber-reinforced polymer (FRP) beyond the abstract nature of the design guidelines from Canada (ISIS Canada 2001), Europe (FIB Task Group 9.3 2001), and the United States (ACI 440.2R-08). Evolved from thorough cla

New and not previously published U.S. and international research on composite and nanocomposite materialsFocus on health monitoring/diagnosis, multifunctionality, self-healing, crashworthiness, integrated computational materials engineering (ICME), and moreApplications to aircraft, armor, bridges, ships, and civil structures This fully searchable CD-ROM contains 270 original research papers on all phases of composite materials, presented by specialists from universities, NASA and private corporations such as Boeing. The document is divided into the following sections: Aviation Safety and Aircraft Structures; Armor and Protection; Multifunctional Composites; Effects of Defects; Out of Autoclave Processing; Sustainable Processing; Design and Manufacturing; Stability and Postbuckling; Crashworthiness; Impact and Dynamic Response; Natural, Biobased and Green; Integrated Computational Materials Engineering (ICME); Structural Optimization; Uncertainty Quantification; NDE and SHM Monitoring; Progressive Damage Modeling; Molecular Modeling; Marine Composites; Simulation Tools; Interlaminar Properties; Civil Structures; Textiles. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 or higher products and can also be used with Macintosh computers. The CD includes the program for Adobe Acrobat Reader with Search 11.0. One year of technical support is included with your purchase of this product.

Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges