Changes in size and power of available mining transport equipment, combined with improved means of control involving leaky feeder radio and computers, demands a new look at the problem of mine winding and transport. Such changes require the traditional mining engineer to have a much greater engineering application. This book is intended to satisfy that requirement.All the important means of transporting operatives and minerals are addressed, both below ground and on the surface. Safe, speedy and economic transport from the point of mineral extraction to leaving the mine is paramount. This work covers all aspects of the problem including: (1) the design and application of steel wire ropes to a variety of industrial applications, and the various drums and pulleys necessary; (2) a ready means of calculating output/throughput of various transport modes, and relating such to their power requirement; and (3) information on transport modes that enables the most suitable system for given conditions to be determined.A ``first principle'' approach has been adopted throughout, and extensive use of practical examples allows the solution of virtually all associated problems. Although formulae are used where necessary for an understanding of the content, the numerous tables included enable the practicing engineer to make short cuts to more quickly solve particular problems. In addition, the provision of a considerable number of operational constants, many not previously published, enable a more speedy and accurate solution to be effected. By comparing the calculated solutions to a particular problem, the most economic transport mode may be determined.Mining, mechanical and electrical engineers concerned with the safe movement of men or material will find this book of particular use, as will the student preparing for examinations on the subject.

For ease of use, this edition has been divided into the following subject sections: general principles; materials and processes; control, power electronics and drives; environment; power generation; transmission and distribution; power systems; sectors of electricity use.New chapters and major revisions include: industrial instrumentation; digital control systems; programmable controllers; electronic power conversion; environmental control; hazardous area technology; electromagnetic compatibility; alternative energy sources; alternating current generators; electromagnetic transients; power system planning; reactive power plant and FACTS controllers; electricity economics and trading; power quality.*An essential source of techniques, data and principles for all practising electrical engineers*Written by an international team of experts from engineering companies and universities*Includes a major new section on control systems, PLCs and microprocessors

Both mining and electrical engineers need to bear in mind the following specific requirements of electrical applications in mining. 1) Economy of electrical plant and equipment in relation to the cost price of the extracted mineral ores, governed by the specific exploitation conditions, 2) Reliability of electrical plant and equipment for extractive operations, operational efficiency, and plant and personnel safety. 3) Special safeguards to counteract the additional hazards posed by the use of electric power, and by electrical phenomena in general. The book has been written along these lines, dealing with those topics which highlight the aspects of electrical engineering of relevance for mining engineers and aspects of mining operations that electrical engineers need, to meet the above-mentioned basic requirements governing the introduction and use of electrical plants and systems in mines.This book is intended as a text book and will be of use to students, and colleges as well as to mining and electrical engineers.

The main aim of this book is to offer an exposition of the principles and applications of an original method which was introduced by the authors, developed gradually in the course of time, and applied extensively in the most diverse fields of management in the mining industry and power engineering. It is a relatively universal method of mathematical model construction and application intended to aid managerial personnel at various management levels in decision-making situations, which are frequently characterized by complicated relations of a quantitative as well as logical character.The method, called by the authors simply the ``method of mathematical-logical modelling'' (MLM for short), is based upon an interesting and effective combination of tools from mathematical logic, Boolean algebra and computer programming. From the mathematical point of view it is based primarily on the construction and solution of systems of pseudo-Boolean equations and inequalities with a generalized logical structure. The principal features of the method are its universality, iterativity, interactivity, and advanced and broadly applicable software, coded in FORTRAN 77. Due in particular to these properties, MLM is a powerful tool for modelling real-life situations in the mining industry (and, naturally, in other fields of human activity as well).The exposition is illustrated by a considerable number of examples. Some of these are rather simple and aimed at helping the reader verify his correct understanding of the text. Other examples, especially in the second part of the book (Chapters 6, 7 and 8), are more complicated and extensive. In some instances they have the character of case studies and demonstrate typical approaches applied when modelling mining situations.The book will be of interest to a broad range of specialists working in the mining industry - research workers, designers, computer personnel, system analysts, management personnel at all managerial levels, and also undergraduate as well as graduate students.

Spearheading the promotion of international technology transfer in the fields of mine planning, mining systems design, equipment selection and operation techniques, the International Symposium on Mine Planning and Equipment Selection is recognised by the mining society as a key annual event in highlighting developments within the field. Here in this volume, proceedings from the thirteenth annual symposium concentrate on the following major topics: * open pit and underground mine planning, modelling and design * geomechanics * mining and processing methods * design, monitoring and maintenance of mine equipment * simulation, optimalization and control of technological processes * management, mine economics and financial analysis * health, safety and environmental protection. Including 147 papers from leading experts and authorities, Mine Planning and Equipment Selection undoubtedly provides valuable information and insight for a range of engineers, scientists, researchers and consultants involved in the planning, design and operation of underground and surface mines.

Principles And Practices Of Modern Coal Mining Is A Comprehensive Text Book On The Theory And Practice Of Coal Mining. It Highlights The Principles And Describes The Modern Techniques Of Surface And Underground Coal Mining Citing Examples From India And Abroad. It Deals With The Exploitation Of Coal Seams Of Different Thicknesses And Dips Occurring In A Variety Of Conditions. Emerging Technologies Of Coal Mining And Their Applications Have Also Been Amply Discussed.After An Introductory Chapter Tracing The History Of Coal Mining And The Development Of Coal Mining Industry In Different Principal Coal ProducingCountries And Highlighting The Emerging Technologies Of Coal Mining The World Over, The Book Offers A Chapter By Chapter Discussion Of The State Of Art Of Underground And Surface Coal Mining Technology.Every Aspect Of Science Of Coal Mining From Geological Occurrence And Exploration To Planning And Exploitation Of Coal Seams, Including Management Of Environment Has Been Scrutinised By The Author. For The Professionals In The Coal Industry As Well As To The Planners, Researchers And Students Of Mining Engineering, The Book Will Be A Useful Reference.

Theoretical and technical problems of electromagnetic compatibility (EMC) in mining are covered in this volume. EMC is discussed in three main groups of problems: sources (generation) of interference, propagation of interference in mining conditions, the influence of interferences on mining devices, particularly electronic devices used in deep coal mines. Propagation of interference and its influence on mining communication and signalling systems as well as on control systems of mining machines are discussed. Attention is paid to the influences of interference on dispatching sytems which give to the dispatcher some information about mining hazards. The book will be of interest to mining and electrical engineers.

A forceful reckoning with the relationship between energy and power through the history of what was once East Asia’s largest coal mine. The coal-mining town of Fushun in China’s Northeast is home to a monstrous open pit. First excavated in the early twentieth century, this pit grew like a widening maw over the ensuing decades, as various Chinese and Japanese states endeavored to unearth Fushun’s purportedly “inexhaustible” carbon resources. Today, the depleted mine that remains is a wondrous and terrifying monument to fantasies of a fossil-fueled future and the technologies mobilized in attempts to turn those developmentalist dreams into reality. In Carbon Technocracy, Victor Seow uses the remarkable story of the Fushun colliery to chart how the fossil fuel economy emerged in tandem with the rise of the modern technocratic state. Taking coal as an essential feedstock of national wealth and power, Chinese and Japanese bureaucrats, engineers, and industrialists deployed new technologies like open-pit mining and hydraulic stowage in pursuit of intensive energy extraction. But as much as these mine operators idealized the might of fossil fuel–driven machines, their extractive efforts nevertheless relied heavily on the human labor that those devices were expected to displace. Under the carbon energy regime, countless workers here and elsewhere would be subjected to invasive techniques of labor control, ever-escalating output targets, and the dangers of an increasingly exploited earth. Although Fushun is no longer the coal capital it once was, the pattern of aggressive fossil-fueled development that led to its ascent endures. As we confront a planetary crisis precipitated by our extravagant consumption of carbon, it holds urgent lessons. This is a groundbreaking exploration of how the mutual production of energy and power came to define industrial modernity and the wider world that carbon made.