This book focuses on new techniques, analysis, applications and future trends of microstrip and printed antenna technologies, with particular emphasis to recent advances from the last decade Attention is given to fundamental concepts and techniques, their practical applications and the future scope of developments. Several topics, essayed as individual chapters include reconfigurable antenna, ultra-wideband (UWB) antenna, reflectarrays, antennas for RFID systems and also those for body area networks. Also included are antennas using metamaterials and defected ground structures (DGSs). Essential aspects including advanced design, analysis and optimization techniques based on the recent developments have also been addressed. Key Features: Addresses emerging hot topics of research and applications in microstrip and printed antennas Considers the fundamental concepts, techniques, applications and future scope of such technologies Discusses modern applications such as wireless base station to mobile handset, satellite earth station to airborne communication systems, radio frequency identification (RFID) to body area networks, etc. Contributions from highly regarded experts and pioneers from the US, Europe and Asia This book provides a reference for R&D researchers, professors, practicing engineers, and scientists working in these fields. Graduate students studying/working on related subjects will find this book as a comprehensive literature for understanding the present and future trends in microstrip and printed antennas.

Today, the state of the art antenna technology allows the use of different types and models of antennas, depending on the area of application considered. The rapid progress in wireless communications requires the development of lightweight, low profile, small size, flush-mounted and wideband multi-frequency planar antennas. This book reviews recent advances in designs of various microstrip patch antenna configurations. Microstrip patch antennas have been widely used in the range of microwave frequencies over the past twenty-five years, and over the past few years, single-patch antennas have been extensively used in various communication systems due to their compactness, economical efficiency, light weight, low profile and conformability to any structure. The main drawback to implementing these antennas in many applications is their limited bandwidth. However, the most important challenge in microstrip antenna design is to increase the bandwidth and gain. Theoretical study of various patch antenna configurations will be carried out in this book. The study is performed by using full wave analysis and analytical techniques for the characterization of these structures. Several techniques are used in this book to achieve multi-band performances such as multilayer stacked patches, multiple patches and insertion of slots of different shapes and sizes in the patch antennas. In addition, some novel patch antenna designs for modern applications are given, and some challenges of patch antenna designs are addressed. This book is divided into seven chapters and presents new research in this dynamic field.

Increasing demand for commercial applications requiring small, low-cost, easy-to-use RF/microwave systems is driving innovations in antenna technology. This "how-to" book explains why microstrip antennas are the solution for the future.

In the past few years, the concept of creating microwave antennas using microstrip has attracted increasing attention and viable practical designs are now emerging. The purpose of this monograph is to present the reader with an appreciation of the underlying physical action, up-to-date theoretical treatments, useful antenna design approaches and the overall state-of-the-art situation. The emphasis is on antenna engineering design, but to achieve this goal it has been necessary to delve into the behaviour of microstrip in a much wider sense and also include aspects of electromagnetic analysis. As a consequence, the monograph will also be of interest to microstrip circuit designers and to some extent those seeking electromagnetic problems of a challenging nature. The astronomical progress in miniaturising and integrating electronic circuits in the past decade has recently crerated a positive demand for a new generation of antenna systems. In principle, microstrip antennas are thin planar configurations that are leightweight, low cost, easy to manufacture and can be made conformal with the surfaces of vehicles, missiles etc. The compatibility of microstrip antennas with integrated electronics is another great advantage. However, the microstrip wavetrapping effects inhibit the radiation mechanism and must be taken into account in antenna design. Wave-trapping effects in substrates involve the study of surface waves and discontinuities in open waveguide structures. The microstrip antenna designer must therefore encompass many more effects than previously considered by microstrip circuit designers. It is for these reasons that the scope of this monograph is necessarily somewhat wider than the title may suggest. The ten chapters are a blend of introductory, practical and theoretical treatments and likely future developments are also highlighted. A good selection of past and current references are given and each chapter concludes with a helpful summary comment.

The book discusses basic and advanced concepts of microstrip antennas, including design procedure and recent applications. Book topics include discussion of arrays, spectral domain, high Tc superconducting microstrip antennas, optimization, multiband, dual and circular polarization, microstrip to waveguide transitions, and improving bandwidth and resonance frequency. Antenna synthesis, materials, microstrip circuits, spectral domain, waveform evaluation, aperture coupled antenna geometry and miniaturization are further book topics. Planar UWB antennas are widely covered and new dual polarized UWB antennas are newly introduced. Design of UWB antennas with single or multi notch bands are also considered. Recent applications such as, cognitive radio, reconfigurable antennas, wearable antennas, and flexible antennas are presented. The book audience will be comprised of electrical and computer engineers and other scientists well versed in microstrip antenna technology.

"This anthology combines 15 years of microstrip antenna technology research into one significant volume and includes a special introductory tutorial by the co-editors. Covering theory, design and modeling techniques and methods, this source book is an excellent reference tool for engineers who want to become more familiar with microstrip antennas and microwave systems. Proven antenna designs, novel solutions to practical design problemsand relevant papers describing the theory of operation and analysis of microstrip antennas are contained within this convenient reference."

This useful tool provides the reader with a current overview of where microstrip patch antenna technology is at, and useful information on how to design this form of radiator for their given application and scenario. Practical design cases are provided for each goal.

Look to this new, cutting-edge microstrip antenna book for the first exhaustive coverage of broadband techniques, including the most up-to-date information to help you choose and design the optimum broadband microstrip antenna configurations for your applications, without sacrificing other antenna parameters. The book shows you how to take advantage of the lightweight, low volume benefits of these antennas, by providing clear explanations of the various configurations and simple design equations that help you analyze and design microstrip antennas with speed and confidence.

Bendable wearable materials like conductive strands, fluid metallic mixes, and polymer in paper are generally utilized as a part of the current adaptable electronic gadgets. Extra necessities are implemented in wearable applications. Characteristic elastic, for example, is an appealing exchange adaptable material that is biocompatible and offers high conductivity, low lost, simplicity to make, and most importantly, it is water/climate safe and condition amicable. The wearable antenna is one of the key components to establish body area network (BAN) for wireless communication, which is why it has become such an important part of antenna research. Wearable antennas are being applied successfully in various parts of life such as health monitoring, physical training, navigation, RFID, medicine, military, and more. Emerging Materials and Advanced Designs for Wearable Antennas explores how wearable antenna technology is being employed to enhance the quality of life in various industries. The technologies implemented and success of these antenna technologies is essential in the emerging field of wearable computing and is discussed in detail within the contents of this book. While covering essential topics such as the optimization of antenna material, improvement in flexible antenna performance, synthesis and design aspects of antennas, and transmission and receiving of the bendable antenna, this book is ideal for the military field, scientists, the medical field, practitioners, stakeholders, researchers, academicians, and students looking for the most advanced and updated research on the technology and implementation of wearable antennas spanning multiple industries.