As the demands put on the polymer/metal interface, particularly by the microelectronics industry, become more and more severe, the necessity for understanding this interface, its properties and its limitations, becomes more and more essential. This requires a broad knowledge of, and a familiarity with, the latest findings in this rapidly advancing field. At the very least, such familiarity requires an exchange of infonnation, particularly among those intimately involved in this field. Communications among many of us in this area have made one fact quite obvious: the facilities provided by existing organizations, scientific and otherwise, do not offer the forum necessary to accomplish this exchange of infonnation. It was for this reason that Jean-Jacques Pireaux, Steven Kowalczyk and I organized the first Metallization of Polymers, a symposium sponsored by the American Chemical Society, which took place in Montreal, September 25-28, 1989; the Proceedings from that symposium were published as ACS Symposium Series 440, (1990). It is this same per ceived lack of a proper forum, and the encouragement of my colleagues, that prompted me to organize this meeting, so as to bring to the attention of the participants new instruments, materials, methods, advances, and, particularly, thoughts in the field of polymer metalliza tion. The meeting was designed as a workshop, with time being made available throughout for discussion and for the consideration of new findings.

This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.

This volume documents the proceedings of the Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December 3-6, 2001. Polyimides possess many desirable attributes, so this class of materials has found applications in many technologies ranging from

This book focuses on the chemistry of metallized and magnetic polymers, as well as the special applications of these materials. After an introductory section on the general aspects of the field, the types and uses of these polymers are detailed, followed by an overview of the testing methods. The book is divided equally into two parts – metallized polymers and magnetic polymers – and both parts follow the same structure: All methods of fabrication Properties and methods of measurement including standard test methods and interface properties Fields of applications Environmental issues including recycling and biodegradable polymers

This new game book for understanding atoms at play aims to document diffusion processes and various other properties operative in advanced technological materials. Diffusion in functional organic chemicals, polymers, granular materials, complex oxides, metallic glasses, and quasi-crystals among other advanced materials is a highly interactive and synergic phenomenon. A large variety of atomic arrangements are possible. Each arrangement affects the performance of these advanced, polycrystalline multiphase materials used in photonics, MEMS, electronics, and other applications of current and developing interest. This book is written by pioneers in industry and academia for engineers, chemists, and physicists in industry and academia at the forefront of today's challenges in nanotechnology, surface science, materials science, and semiconductors.

The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the

This book is mostly based on papers presented at the Fourth International Symposium on this topic held in Savannah, Georgia. However, in addition to these papers, certain very relevant papers have also been included to broaden the scope and thus enhance the value of this book. Currently there is tremendous interest in these material because of their unique properties and applications in diverse technological areas ranging from microelectronics to aerospace to adhesive bonding. This book is divided into three parts: Part 1: Synthesis and Bulk Characterization; Part 2: Surface and Interface Aspects (Composites and Metallization); and Part 3: Applications. The topics covered include: synthesis of a number of polyimides with tailored properties; nanocomposites for high-performance applications; molecular assembly of polyimides; polyimide L-B films; metallization of polyimides; applications of high temperature polymers as proton exchange membranes; dielectrics, and in textile.

This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.

In eight volumes, Surface and Interface Science covers all fundamental aspects and offers a comprehensive overview of this research area for scientists working in the field, as well as an introduction for newcomers. Volume 5: Solid-Gas Interfaces I Topics covered: Basics of Adsorption and Desorption Surface Microcalorimetry Adsorption of Rare Gases Adsorption of Alkali and Other Electro-Positive Metals Halogen adsorption on metals Adsorption of Hydrogen Adsorption of Water Adsorption of (Small) Molecules on Metal Surfaces Surface Science Approach to Catalysis Adsorption, Bonding and Reactivity of Unsaturated and Multifunctional Molecules Volume 6: Solid-Gas Interfaces II Topics covered: Adsorption of Large Organic Molecules Chirality of Adsorbates Adsorption on Semiconductor Surfaces Adsorption on Oxide Surfaces Oscillatory Surface Reactions Statistical Surface Thermodynamics Theory of the Dynamics at Surfaces Atomic and Molecular Manipulation