Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.

This book has two objectives. One is to present a new way of understanding through the phenomena of metal fatigue the effect of small defects. The other is to set out a practical method for engineers and researchers working on fatigue design and structural integrity to use when assessing the influence of small defects and nonmetallic inclusions on fatigue strength. It goes without saying that the method presented here is based on a rational interpretation of fatigue phenomena. Consequently, this book takes the form of a specialist work for practical use rather than a textbook of comprehensive introduction. The second half mainly addresses problems related to the influence of nonmetallic inclusions. This includes the introduction of an inclusion rating method based on the statistics of extremes, which will be useful not only for fatigue strength evaluation but also for making improvements in steel processing and material quality control.....[preface Y. Murakami].

Metal fatigue is an essential consideration for engineers and researchers looking at factors that cause metals to fail through stress, corrosion, or other processes. Predicting the influence of small defects and non-metallic inclusions on fatigue with any degree of accuracy is a particularly complex part of this. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions is the most trusted, detailed and comprehensive guide to this subject available. This expanded second edition introduces highly important emerging topics on metal fatigue, pointing the way for further research and innovation. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book. - Demonstrates how to solve a wide range of specialized metal fatigue problems relating to small defects and non-metallic inclusions. - Provides a detailed introduction to fatigue mechanisms and stress concentration. - This edition is expanded to address even more topics, including low cycle fatigue, quality control of fatigue components, and more.

Toshio Mura has written extensively on micromechanics over the years, and in part due to his writings and many others in the field, micromechanics has gradually emerged as a recognized discipline in the study of mechanics of materials. The idea is to bring both the mechanics and physics on the micro scopic level to the macroscopic scale, so that the deformation and fracture processes of materials can be better understood. While much apparently remains to be done, this approach has already shed new light on certain selected topics and has proved to be fruitful. It is indeed a happy occasion to celebrate both Toshio's upcoming 65th birthday and the emergence of this young science at the same time. The volume contains thirty-seven original articles on the related topics of micromechanics and inhomogeneity; it is presented to Toshio by his friends, colleagues, and admirers as a wish for his good health and continuing pro ductivity. The contributors belong to both the applied mechanics and the materials communities, all with a common belief that micromechanics is an indispensable area of research. It is hoped that this somewhat balanced structure will make the volume more useful to a wider range of readers, and that in the meantime it will still reflect more or less the spectrum of Toshio's lifelong works. As Editors we have at the outset set the highest possible standards for the book, with a keen anticipation that the volume will be widely circulated for many years to come.

Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.

Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures

A compilation of research in fatigue design, prediction, and assessment Fatigue Design is a collection of research presented at the 1993 International Symposium on Fatigue Design. Detailing the latest findings and most current research, this book features papers on a variety of pertinent topics, including the quantification of service load for fatigue life predictions, identification of stress states and failure modes, assessment of residual life in damaged components, and more. Special attention is paid to the need for simple and reliable prediction tools to help better ensure adequate strength at the design stage.

This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.