As a basic human need, water and its treatment are of the utmost importance. However, some rural areas are disadvantaged and have difficulty in effectively treating their water supply, which can affect the health and safety of their region. To protect and defend citizens, research must supply effective and applicable methods in securing the safety and drinkability of water. Membrane Technology for Water and Wastewater Treatment in Rural Regions is an essential publication that discusses the fabrication and characterization of membranes, processes and operations, and specific applications of membranes on water and wastewater treatment. Moreover, the book discusses selected promising aspects of membrane usage in the industry with a focus on palm oil mill industry, sewage management and treatment, and water treatment in rural areas. Featuring coverage on a broad range of topics including membrane processes, water production, and transport resistances, this book is ideally designed for engineers, chemists, environmentalists, public officials, researchers, academicians, students, and industry professionals.

As a basic human need, water and its treatment are of the utmost importance. However, some rural areas are disadvantaged and have difficulty in effectively treating their water supply, which can affect the health and safety of their region. To protect and defend citizens, research must supply effective and applicable methods in securing the safety and drinkability of water. Membrane Technology for Water and Wastewater Treatment in Rural Regions is an essential publication that discusses the fabrication and characterization of membranes, processes and operations, and specific applications of membranes on water and wastewater treatment. Moreover, the book discusses selected promising aspects of membrane usage in the industry with a focus on palm oil mill industry, sewage management and treatment, and water treatment in rural areas. Featuring coverage on a broad range of topics including membrane processes, water production, and transport resistances, this book is ideally designed for engineers, chemists, environmentalists, public officials, researchers, academicians, students, and industry professionals.

The MBR Book

Tackling the issue of water and wastewater treatment nowadays requires novel approaches to ensure that sustainable development can be achieved. Water and wastewater treatment should not be seen only as an end-of-pipe solution but instead the approach should be more holistic and lead to a more sustainable process. This requires the integration of various methods/processes to obtain the most optimized design. Integrated and Hybrid Process Technology for Water and Wastewater Treatment discusses the state-of-the-art development in integrated and hybrid treatment processes and their applications to the treatment of a vast variety of water and wastewater sources. The approaches taken in this book are categorized as (i) resources recovery and consumption, (ii) optimal performance, (iii) physical and environmental footprints, (iv) zero liquid discharge concept and are (v) regulation-driven. Through these categories, readers will see how such an approach could benefit the water and wastewater industry. Each chapter discusses challenges and prospects of an integrated treatment process in achieving sustainable development. This book serves as a platform to provide ideas and to bridge the gap between laboratory-scale research and practical industry application. - Includes comprehensive coverage on integrated and hybrid technology for water and wastewater treatment - Takes a new approach in looking at how water and wastewater treatment contributes to sustainable development - Provides future direction of research in sustainable water and wastewater treatment

Realizing that water, energy and food are the three pillars to sustain the growth of human population in the future, this book deals with all the above aspects with particular emphasis on water and energy. In particular, the book addresses applications of membrane science and technology for water and wastewater treatment, energy and environment. Th

This book analyses the sustainability of membrane operations applied on an industrial scale, as well as that of those under investigation on lab/pilot scales, covering also the preparation of both polymeric and inorganic membranes. It presents reverse osmosis in desalination, membrane bioreactors for municipal wastewater treatment and pressure-driven industrial wastewater treatment in agrofood and textile fields as examples of industrial membrane operations. Regarding the membrane processes still on a lab/pilot scale, the analysis includes membrane operations for the recovery of valuable products from wastewater streams, for the removal of toxic compounds from water/wastewater, and for zero liquid discharge approaches in desalination. The book offers a useful guide for scientists and engineers working in various fields, including membrane technology, separation, desalination, and wastewater treatment. Alberto Figoli and Alessandra Criscuoli are both Senior Researchers at the Institute on Membrane Technology (ITM-CNR), Italy.

Membrane technology with effective removal of microbial contaminants has been applied widely in drinking water treatment (DWT), but its sustainable and efficient application in rural areas still needs practical research. Backflushing and chemical cleaning are well investigated for membrane-based systems. However, these methods are not always followed properly and in full, especially in cases of applications for remote areas in developing countries. Important key challenges in real world applications are how the system would actually sustain with unskilled personnel, with no electric power for backflushing or with no chemical cleaning on the long run. These challenges were addressed within the framework of this dissertation. A dead-end Ultrafiltration (UF) with flat-sheet membranes was configured to a stationary DWT system working with low pressure and simplest maintenance, in combination with a suitable chlorination solution without energy demand. In the literature review of this dissertation, an overview of many up-to-date membrane based systems in different categories of use is given in detail, covering different aspects of technology, service efficiency and economics. Hydraulic performance of membrane-based systems is normally studied in lab-scale in limited periods from hours to days. Thus, highlight of this research is the investigation of a full-scale demonstration plant based on UF flat-sheet membrane with pore size of 40 nm, conducted in the Hydraulic Workshop at the University of Kassel, operated continuously day and night for long-term tests. The long-term examination focused on many aspects, from hydraulic performance including flux, permeability, transmembrane pressure, efficiency of the simple membrane cleaning methods, to biological quality of treated water and also efficiency of chlorination by using a mechanical chlorine dosing device. During long-term examination, the phenomenon of gas generation from the water in the plant was recognized. The influence of this phenomenon on the permeate flow rate was evaluated and solution for this problem by the gas trapping device was investigated in this research. The experimental results from long-term examination of the Pilot Plant at the University of Kassel served for the materialization of the system into life. Two DWT plants were implemented in a rural village in southern Vietnam. It could be proved that the product of this research is realistically an economic relief of the long lasted insufficient supply to the crucial demand for safe water in the rural communities of developing countries.

Focuses on the application of membrane technologies in removing toxic metals\metalloids from water. Particular attention is devoted to the removal of arsenic, uranium, and fluoride. These compounds are all existing in the earth’s crust at levels between two and five thousands micrograms per kg (parts per million) on average and these compounds can be considered highly toxic to humans, who are exposed to them primarily from air, food and water. In order to comply with the new maximum contaminant level, numerous studies have been undertaken to improve established treatments or to develop novel treatment technologies for removing toxic metals from contaminated surface and groundwater. Among the technologies available, applicable for water treatment, membrane technology has been identified as a promising technology to remove such toxic metals from water. The book describes both pressure driven (traditional processes, such as Nanofiltration, Reverse Osmosis, Ultrafiltration,etc) and more advanced membrane processes (such as forward osmosis, membrane distillation, and membrane bio-reactors) employed in the application of interest. Key aspect of this book is to provide information on both the basics of membrane technologies and on the results depending on the type of technology employed.

Membrane technologies are currently the most effective and sustainable methods utilized in diversified water filtration, wastewater treatment, as well as industrial and sustainable energy applications. This book covers essential subsections of membrane separation and bioseparation processes from the perspectives of technical innovation, novelty, and sustainability. The book offers a comprehensive overview of the latest improvements and concerns with respect to membrane fouling remediation techniques, issues of bioincompatibility for biomedical applications, and various subareas of membrane separation processes, which will be an efficient resource for engineers.

The complex dimensions of the Mediterranean freshwater resources, their fragility and their scarcity have been highlighted and have received considerable attention as a primary priority issue politically, technically and scientifically. Membrane technology, with its different applications in water treatment (desalination, potable water treatment, wastewater treatment and reuse) has showed to be a powerful tool to abate the water crisis in the Mediterranean region. The primary objective of Membrane Technology in Water Treatment in the Mediterranean Region is to support the current research and development activities in membrane technology focused on water treatment in the Mediterranean area, providing an international stage to local research organisations and universities devoted to the development of membrane technologies in the following areas: municipal and industrial wastewater treatment, surface water purification and brackish and sea water treatment for drinking purpose. It covers the identification, mapping and evaluation of the on-going research, in order to propose future research and co-operation strategies. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MembraneTechnologyinWaterTreatmentintheMediterraneanRegion