This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 3 includes the following topics: Numerical simulations of three-dimensional laminar mixed convection heat transfer of water-based-Al2O3 nanofluid in an open cubic cavity with a heated block. Nonlinear formulations of Element-Free Galerkin Method (EFGM) for large deformation analysis of Ogden’s hyperelastic materials, emphasizing incompressibility and mesh distortion avoidance. Development of a 3D numerical model with LS-DYNA using a coupled SPH-FEM method to simulate hydraulic behavior of a Ski-Jump Spillway with dentates, showcasing precision through validation. Exploration of enhancing the inlet system of an LPG-H2 fueled engine using a static inclined blade turbine, analyzed through Computational Fluid Dynamics (CFD) simulations. Effective utilization of Artificial Neural Networks (ANN) in heat transfer applications, addressing issues like fouling in heat exchangers, showcasing their accuracy compared to experimental data. Investigation of the impact of nitrogen concentration on the structure and properties of ZrN coatings deposited by magnetron sputtering, evaluating variations in structural and mechanical properties. Forced convection in a horizontal cylindrical pipe with pseudoplastic fluid, considering uniform constant heat flux and uniform temperature as boundary conditions. Modeling and experimental study of a water solar collector coupled to an optimized solar still, aiming to enhance freshwater production in a solar distillation system under specific climatic conditions. Exploration of the effect of film thickness on the structure and properties of Ti-N films deposited by magnetron sputtering, utilizing theoretical and experimental analysis to confirm the rock salt TiN structure. The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology. Readership Graduate students, PhD candidates and professionals seeking basic and applied information related to mechanical engineering and technology.

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Special topic volume with invited peer reviewed papers only

Recent advances in power electronics greatly benefit the multidisciplinary field of modern ultrasonics. More powerful, compact, and versatile electronic chips and software enable new computer-based devices for real-time data capture, storage, analysis, and display and advance the science and technology employed in commercial systems and applications of ultrasound. Reviewing the scientific basis behind these improvements, Ultrasonics: Fundamentals, Technologies, and Applications, Third Edition discusses them in detail, with new and additional figures and references, offering a completely revised and expanded examination of the state of modern ultrasonics. This new edition of a bestselling industry reference discusses the full breadth of ultrasonics applications for industrial and medical use and provides the fundamentals and insights gathered over the authors’ collective 80 years in the field. It provides a unique and comprehensive treatment of the science and technology behind the latest advancements and applications in both low and high power implementations. Coverage combines fundamental physics, a review and analysis of sensors and transducers, and the systems required for the full spectrum of industrial, nondestructive testing and medical and biomedical uses. It includes citations of numerous references and covers both main stream and the more unusual and obscure applications of ultrasound. Ultrasonics is ubiquitous in its industrial applications for sensing, NDT, and process measurements, in high power forms for processing and sonochemistry, as well as in medical procedures where it is used for diagnosis, therapy and surgery. This book provides a complete overview of the field, presenting numerous applications, cutting-edge advancements and improvements, additional figures and references, and a look at future directions.

"Mechanical Engineering Principles offers a student-friendly introduction to core engineering topics that does not assume any previous background in engineering studies, and as such can act as a core textbook for several engineering courses. Bird and Ross introduce mechanical principles and technology through examples and applications rather than theory. This approach enables students to develop a sound understanding of the engineering principles and their use in practice. Theoretical concepts are supported by over 600 problems and 400 worked answers. The new edition will match up to the latest BTEC National specifications and can also be used on mechanical engineering courses from Levels 2 to 4"--

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. The book contents include the following topics: Numerical analysis of hydrokinetic turbines Computational fluid dynamics of a CuO based nanofluid in mini-channel cross-sections Orthodontic biomechanics of a NiTi arch wires Reynold’s number effects on fluid flow through Savonius rotors Effect of operating parameters on Zn-Mn alloys deposited from additive-free chloride bath Optical properties and stability of a blue-emitting phosphor (Sr2P2O7:Eu2+) Under UV and VUV excitation Numerical study of the influence of nanofluid type on thermal improvement in a three dimensional mini channel Electrochemical studies and characterization of Zn-Mn coatings deposited in the presence of novel organic additives Prediction of fire and smoke propagation under a range of external conditions Structural design of a 10 kW H-Darrieus wind turbine The presented case studies and development approaches aim to provide the readers, such as graduate students, PhD candidates and professionals with basic and applied information broadly related to mechanical engineering and technology.

This book addresses conference topics such as information technology in the design and manufacture of engines; information technology in the creation of rocket space systems; aerospace engineering; transport systems and logistics; big data and data science; nano-modeling; artificial intelligence and smart systems; networks and communication; cyber-physical systems and IoE; and software engineering and IT infrastructure. The International Scientific and Technical Conference “Integrated Computer Technologies in Mechanical Engineering” – Synergetic Engineering (ICTM) was formed to bring together outstanding researchers and practitioners in the field of information technology, and whose work involves the design and manufacture of engines, creation of rocket space systems, and aerospace engineering, from all over the world to share their experiences and expertise. It was established by the National Aerospace University “Kharkiv Aviation Institute.” The ICTM’2020 conference was held in Kharkiv, Ukraine on October 28–30, 2020.

This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.

Mechanical Engineer's Reference Book, 12th Edition is a 19-chapter text that covers the basic principles of mechanical engineering. The first chapters discuss the principles of mechanical engineering, electrical and electronics, microprocessors, instrumentation, and control. The succeeding chapters deal with the applications of computers and computer-integrated engineering systems; the design standards; and materials' properties and selection. Considerable chapters are devoted to other basic knowledge in mechanical engineering, including solid mechanics, tribology, power units and transmission, fuels and combustion, and alternative energy sources. The remaining chapters explore other engineering fields related to mechanical engineering, including nuclear, offshore, and plant engineering. These chapters also cover the topics of manufacturing methods, engineering mathematics, health and safety, and units of measurements. This book will be of great value to mechanical engineers.