Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications

The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. - Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry - Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications - Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

The current automotive industry faces numerous challenges, including increased global competition, more stringent environmental and safety requirements, the need for higher performance vehicles, and reducing costs. The materials used in automotive engineering play key roles in overcoming these issues. Automotive Engineering: Lightweight, Functional

Lightweighting is a concept well known to structural designers and engineers in all applications areas, from laptops to bicycles to automobiles to buildings and airplanes. Reducing the weight of structures can provide many advantages, including increased energy efficiency, better design, improved usability, and better coupling with new, multifunctional features. While lightweighting is a challenge in commercial structures, the special demands of military vehicles for survivability, maneuverability and transportability significantly stress the already complex process. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft assesses the current state of lightweighting implementation in land, sea, and air vehicles and recommends ways to improve the use of lightweight materials and solutions. This book considers both lightweight materials and lightweight design; the availability of lightweight materials from domestic manufacturers; and the performance of lightweight materials and their manufacturing technologies. It also considers the "trade space"-that is, the effect that use of lightweight materials or technologies can have on the performance and function of all vehicle systems and components. This book also discusses manufacturing capabilities and affordable manufacturing technology to facilitate lightweighting. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft will be of interest to the military, manufacturers and designers of military equipment, and decision makers.

The desire for greater fuel efficiency and reduced emissions have accelerated a shift from traditional materials to design solutions that more closely match materials and their properties with key applications. The Multi-Material Lightweight Vehicle (MMLV) Project presents cutting edge engineering that meets future challenges in a concept vehicle with weight and life-cycle assessment savings. These results significantly contribute to achieving fuel reduction and to meeting future Corporate Average Fuel Economy (CAFÉ) regulations without compromising vehicle performance or occupant safety. The MMLV Project presents: • Lightweight materials applications. • Body in white design and computer aided engineering • Engine and transmission design and lightweighting. • Full vehicle test results that are specific to the MMLV subsystems including crash, corrosion, durability and Noise Vibration and Harshness (NVH). • The Life Cycle Analysis (LCA) for the MMLV The aluminum-intensive structure, combined with carbon fiber, magnesium, and titanium results in full vehicle mass reduction of a C/D class family sedan to that of a subcompact B-car (two vehicle segments lighter). The MMLV Project presents engineering solutions that frame materials selection and applications for the future.

1 Introduction -- 2 Design and material utilization -- 3 Materials for consideration and use in automotive body structures -- 4 The role of demonstration, concept and competition cars -- 5 Component manufacture -- 6 Component assembly: materials joining technology -- 7 Corrosion and protection of the automotive structure -- 8 Environmental considerations -- 9 Future trends in automotive body materials.

The Complete Book on Production of Automobile Components & Allied Products (Engine Parts, Piston, Pin, Piston Ring, Valve, Control Cable, Engine Mounting, Auto Lock, Disc Brake, Drum, Gear, Leaf Spring, Shock Absorber, Silencer, Chain, Cylinder Block, Chassis, Battery, Tyre & Flaps) The rapid urbanization, coupled with an overwhelming growth in the middle class population, has created a market that is extremely conducive for the automobile industry to flourish. It is inferred from the demand, the investment in the automobile industry is estimated at over hundredths of billions in the vehicles and auto components segment. The auto market is thought to be made primarily of automakers, but auto parts makes up another lucrative sector of the market. The major areas of auto parts manufacturing are: Original Equipment Manufacturers (OEMs) - The big auto manufacturers do produce some of their own parts, but they can't produce every part and component that goes into a new vehicle; Replacement Parts Production and Distribution - These are the parts that are replaced after the purchase of a vehicle. The book provides a characterization of vehicles, including structure, load, fuel used, requirement of various components, fabrication and so on. It will prove to be a layman’s guide and is highly recommended to entrepreneurs, existing units who wants to diversify in production of automobile and allied products, research centers, professionals and libraries, as it contains information related to manufacturing of integral parts of an automobile and practices followed in the finishing of the products. The topics covered in the book are: Classification of vehicles on the basis of load, fuel used and their parts; Material used in the manufacturing of automobile (Metals, Alloys, Polymers etc.); Technology used; Use of Aluminium in Automobiles; Use of Plastics in Automobiles; Manufacturing practices for Engine Parts(Auto Piston, Pins, Piston ring, Lead Storage Battery, Valve & Valve Seat, Automobile Silencer, Automobile Chain, Cylinder Block, Automobile Control Cable, Engine Mounting PAD, Auto Locks etc.); Manufacturing of Automobile Chassis, Disc Brake, Brake Drum, Gear, Gear Blank, Leaf Spring, Shock Absorbers, Automobile Tyres; Heat Treatment System for Automobile Parts; Forging Technology (Open Die Forging Process, Close Die Forging Process, Designing of forged parts) and Painting Technology(Conversion Coating, NAD Finishes, Aluminium Flake Orientation, Opacity, Gloss, Electro Powder Coating, Spot Repair, Electrostatic Spray etc.) for automobile parts; Scab Corrosion Test, Peel Resistance. TAGS Accessories & Spares Manufacturing Plant, Auto Body Parts, Auto components industry, Auto Components, Auto Industry in India, Auto Parts Business Opportunities, Auto parts business start up, Auto parts making machine factory, Auto parts making Small Business Manufacturing, Auto parts manufacturing Business, Auto Parts, Auto spare parts business plan, Automobile Based Profitable Projects, Automobile Based Small Scale Industries Projects, Automobile business ideas in India, Automobile Components & Allied Products, Automobile Industry in India, Automobile industry Technology book, Automobile Industry, Automobile manufacturing Industry in India, Automobile Parts and Spares Business, Automobile Processing Projects, Automobile spare parts business plan, Automobile spare parts business, Automotive Components, Best Automotive Business Opportunities & ideas, Best automotive business to start, Best small and cottage scale industries, Book on Production of Automobile Components, Business consultancy, Business consultant, Business guidance to clients, Business guidance for automobile industry, Business Plan for a Startup Business, Business start-up, Car Parts, Forging technology of automobile parts, Great Opportunity for Startup, Highly Profitable Automobile Business Ideas, How to start a successful automobile business, How to Start a Used Auto Parts Business, How to Start an Auto Parts Store Small Business, How to start an automobile components business?, How to start auto parts Production Business, How to start automobile business, How to start automobile Industry in India, How to start automobile spare parts business in India, Indian Automobile Industry, Manufacturing of Auto Locks, Manufacturing of Auto Piston, Manufacturing of Automobile Chain, Manufacturing of automobile chassis, Manufacturing of Automobile Control Cable, Manufacturing of Automobile Silencer, Manufacturing of Cylinder Block, Manufacturing of Cylinder Linear, Manufacturing of engine parts, Manufacturing of Lead Storage Battery, Manufacturing of Pins for Automobiles, Manufacturing of Piston Ring, Manufacturing of Valve and Valve Seat, Manufacturing Process of Automobiles Tyres, Materials used in automobiles, Most Profitable automobile manufacturing Business Ideas, New small scale ideas in automobile industry, Painting technology of automobiles, Preparation of Project Profiles, Process technology books, Profitable Small Scale Auto parts Manufacturing, Project for startups, Project identification and selection, Replacement Parts, Setting up and opening your automobile Business, Small business ideas in automobile field, Small scale Auto parts production line, Small Scale Automobile Business Ideas, Small Scale automobile components manufacturing Projects, Small scale Commercial Auto parts making, Small Start-up Business Project, Spare Parts, Start Up India, Stand Up India, Starting an auto parts manufacturing Business, Start-up Business Plan for automobile industry, Startup ideas, Startup Project for automobile components industry, Technology for automobiles, Three Wheeler and Four Wheeler Parts, Tractor Parts, Motorcycle Parts, Two Wheeler, Use of aluminium in automobiles, Use of plastics in automobiles, Ways to Jump-Start the Auto Business

Automotive manufacturers are required to decrease CO2 emissions and increase fuel economy while assuring driver comfort and safety. In recent years, there has been rapid development in the application of lightweight and sustainable materials in the automotive industry to help meet these criteria. This book provides critical reviews and the latest research results of various lightweight and sustainable materials in automotive applications. It discusses current applications and future trends of lightweight materials in the automotive area. While there are a few books published mainly focusing on automotive applications of metallic lightweight materials, to date there is no available book focusing on a broad spectrum of lightweight materials, including metal, plastic, composites, bio-fiber, bio-polymer, carbon fiber, glass fiber, nanomaterials, rubber materials, and foaming materials, as this work does. The book also includes case studies of commercial lightweight automotive parts from sustainable lightweight materials, providing an invaluable resource to those involved in this in-demand research and commercialization area.

This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.