Magnetic composite particles offer much potential for use in a variety of applications, including manufacturing, environmental protection, microfluidics, microelectronics, and biomedicine. Magnetic Polymer Composites and Their Emerging Applications explores leading research on the fabrication, characterization, properties, and all reported applications of magnetic polymer composites. Features: Discusses synthesis, properties, and modern fabrication technologies of magnetic polymer composites Describes the biocompatibility, suitability, and toxic effects of these materials Covers a variety of applications including those in biomedicine, wastewater treatment, soft robotics, 3D/4D printing, and agriculture Details opportunities and future directions in magnetic polymer composites and their surface decorations This unique book serves as a road map for materials engineers, as well as researchers, academics, technologists, and students working in sensor technology.

The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.

This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.

This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.

Smart Polymer Nanocomposites: Biomedical and Environmental Applications presents the latest information on smart polymers and their promising application in various fields, including their role in delivery systems for drugs, tissue engineering scaffolds, cell culture sports, bioseparation, and sensors or actuator systems. - Features detailed information on the preparation, characterization and applications of smart functional polymer composites - Covers a broad range of applications in both the biomedical and environmental engineering fields - Chapters are written by authors with diverse background expertise from the faculties of chemistry, engineering and the manufacturing industry

Polymer composites are materials in which the matrix polymer isreinforced with organic/inorganic fillers of a definite size andshape, leading to enhanced performance of the resultant composite.These materials find a wide number of applications in such diversefields as geotextiles, building, electronics, medical, packaging,and automobiles. This first systematic reference on the topic emphasizes thecharacteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia,government, industry, as well as private research institutionsacross the globe, and adopt a practical approach here, coveringsuch aspects as the preparation, characterization, properties andtheory of polymer composites. The book begins by discussing the state of the art, new challenges,and opportunities of various polymer composite systems. Interfacialcharacterization of the composites is discussed in detail, as isthe macro- and micromechanics of the composites. Structure-propertyrelationships in various composite systems are explained with thehelp of theoretical models, while processing techniques for variousmacro- to nanocomposite systems and the influence of processingparameters on the properties of the composite are reviewed indetail. The characterization of microstructure, elastic,viscoelastic, static and dynamic mechanical, thermal, tribological,rheological, optical, electrical and barrier properties arehighlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites;Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.

Advances in Metal Oxides and their Composites for Emerging Applications reviews key properties of metal-oxide based composites, including their structural, physicochemical, optical, electrical components and resulting performance in a wide range of diverse applications. Synthetic protocols used to create metal oxides with desirable morphologies, properties and performance for applications in solar energy harvesting, energy storage and environmental remediation are emphasized. Emerging technologies that address important global challenges such as energy shortage, the hazardous effects of non-renewable energy sources, unaffordable energy technologies, and the contaminants present in air and water are also covered. This book is an ideal resource for materials scientists and engineers working in academia and R&D. In addition, it's appropriate for those who either need an introduction to potential research directions or for experienced researchers and practitioners looking for a key reference on the latest advances. - Introduces the fundamental properties of metal oxide-based composites, paying special attention to physicochemical, optical, electrical and structural characteristics - Provides an overview of the synthetic protocols used to design and tune the properties of metal oxide-based composites for key emerging applications - Discusses metal oxide-based composites and their use in energy applications such as energy storage, energy harvesting and environmental remediation

Low-dimensional magnetic materials find their wide applications in many areas, including spintronics, memory devices, catalysis, biomedical, sensors, electromagnetic shielding, aerospace, and energy. This book provides a comprehensive discussion on magnetic nanomaterials for emerging applications. Fundamentals along with applications of low-dimensional magnetic materials in spintronics, catalysis, memory, biomedicals, toxic waste removal, aerospace, telecommunications, batteries, supercapacitors, flexible electronics, and many more are covered in detail to provide a full spectrum of their advanced applications. This book offers fresh aspects of nanomagnetic materials and innovative directions to scientists, researchers, and students. It will be of particular interest to materials scientists, engineers, physicists, chemists, and researchers in electronic and spintronic industries, and is suitable as a textbook for undergraduate and graduate studies.

MXenes and their Composites: Synthesis, Properties and Potential Applications presents a state of the art overview of the recent developments on the synthesis, functionalization, properties and emerging applications of two-dimensional (2D) MXenes and their composites.The book systematically describes the state-of-the-art knowledge and fundamentals of MXene synthesis, structure, surface chemistry and functionalization. The book also discusses the unique electronic, optical, mechanical and topological properties of MXenes. Besides, this book covers the various emerging applications of MXenes and their composites across different fields such as energy storage and conversion, gas sensing and biosensing, rechargeable lithium and sodium-ion batteries, lithium-sulphur and multivalent batteries, electromagnetic interference shielding, hybrid capacitors and supercapacitors, hydrogen storage, catalysis and photoelectrocatalysis, gas separation and water desalination, environmental remediation and medical and biomedical applications. All these applications have been efficiently discussed in the specific chapters and in each case, the processing of MXene composites has also been discussed.This book will be an excellent reference for scientists and engineers across various disciplines and industries working in the field of highly promising 2D MXenes and their composites. The book will also act as a guide for academic researchers, material scientists, and advanced students in investigating the new applications of 2D MXenes based materials. - Covers fundamentals of technologically important MAX phases, MXene derivatives, MXene synthesis methods, intercalation and delamination strategies, surface functionalization, fundamental characteristics and properties - Demonstrates major application areas of MXenes, including catalytic, energy storage and energy generation, flexible electronics, EMI shielding, sensors and biosensors, medical and biomedical, gas separation and water desalination - Presents a detailed discussion on the processing and performance of various MXenes towards different applications

The novel properties of multifunctional polymer nanocomposites make them useful for a broad range of applications in fields as diverse as space exploration, bioengineering, car manufacturing, and organic solar cell development, just to name a few. Presenting an overview of polymer nanocomposites, how they compare with traditional composites, and their increasing commercial importance, Multifunctional Polymer Nanocomposites conveys the significance and various uses of this new technology for a wide audience with different needs and levels of understanding. Exploring definitions, architectures, applications, and fundamental principles of various functions of multifunctional polymeric smart materials—from bulk to nano—this book covers the use of multifunctional polymer nanocomposites in: Carbon nanotubes Electroactive and shape memory polymers Magnetic polymers Biomedical and bioinformation applications Fire-resistance treatments Coating technologies for aeronautical applications Ocean engineering A practical analysis of functional polymers, nanoscience, and technology, this book integrates coverage of fundamentals, research and development, and the resulting diversity of uses for multifunctional polymers and their nanocomposites. Quite possibly the first reference of its kind to explore the progress of polymer nanocomposites in terms of their multifunctionality, it covers both theory and experimental results regarding the relationships between the effective properties of polymer composites and those of polymer matrices and reinforcements. This book is a powerful informational resource that illustrates the importance of polymer nanomaterials, examining their applications in various sectors to promote new, novel research and development in those areas. It will be a welcome addition to the libraries of not only engineering researchers, but senior and graduate students in relevant fields.