This book presents extensive information related to the history of IUTAM. The initial chapters focus on IUTAM’s history and selected organizational aspects. Subsequent chapters provide extensive data and statistics, while the closing section showcases photos from all periods of the Union’s history. The history of IUTAM, the International Union on Theoretical and Applied Mechanics, began at a conference in 1922 in Innsbruck, Austria, where von Kármán put forward the idea of an international congress including the whole domain of applied mechanics. In 1946 IUTAM was then formally launched in Paris/France. IUTAM has since time organized more than 24 world congresses and 380 symposia, representing all fields of mechanics and highlighting advances by prominent international researchers. The efforts of IUTAM and its about 50 member countries serve to promote the mechanical sciences and the advancement of human society, addressing many key challenges. In this context, IUTAM preserves important traditions while at the same time recognizing new challenges and adapting its structures and processes accordingly. The first edition of this book was published in 1988. This new book now offers an updated and completely revised edition reflecting the substantial developments in the interim.

This book started its life as a series of lectures given by the second author from the 1970’s onwards to students in their third and fourth years in the Department of Mechanics and Mathematics at Rostov State University. For these lectures there was also an audience of engineers and applied mechanicists who wished to understand the functional analysis used in contemporary research in their fields. These people were not so much interested in functional analysis itself as in its applications; they did not want to be told about functional analysis in its most abstract form, but wanted a guided tour through those parts of the analysis needed for their applications. The lecture notes evolved over the years as the first author started to make more formal typewritten versions incorporating new material. About 1990 the first author prepared an English version and submitted it to Kluwer Academic Publishers for inclusion in the series Solid Mechanics and its Applications. At that state the notes were divided into three long chapters covering linear and nonlinear analysis. As Series Editor, the third author started to edit them. The requirements of lecture notes and books are vastly different. A book has to be complete (in some sense), self contained, and able to be read without the help of an instructor.

This is the proceedings of the IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems that was held in Novi Sad, Serbia, from July 15th to 19th, 2018. The appearance of nonlinear phenomena used to be perceived as dangerous, with a general tendency to avoid them or control them. This perception has led to intensive research using various approaches and tailor-made tools developed over decades. However, the Nonlinear Dynamics of today is experiencing a profound shift of paradigm since recent investigations rely on a different strategy which brings good effects of nonlinear phenomena to the forefront. This strategy has a positive impact on different fields in science and engineering, such as vibration isolation, energy harvesting, micro/nano-electro-mechanical systems, etc. Therefore, the ENOLIDES Symposium was devoted to demonstrate the benefits and to unlock the potential of exploiting nonlinear dynamical behaviour in these but also in other emerging fields of science and engineering. This proceedings is useful for researchers in the fields of nonlinear dynamics of mechanical systems and structures, and in Mechanical and Civil Engineering.

Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).

Now in its fully updated fourth edition, this leading text in its field is an exhaustive monograph on turbulence in fluids in its theoretical and applied aspects. The authors examine a number of advanced developments using mathematical spectral methods, direct-numerical simulations, and large-eddy simulations. The book remains a hugely important contribution to the literature on a topic of great importance for engineering and environmental applications, and presents a very detailed presentation of the field.

Substantial progress has been made in the field of fluid mechanics under compensated gravity effects (microgravity). The main task of this disciplinehas evolved tremendously. Starting out with the aim of providing assistance in describing flow problems in other microgravity sciences, microgravityfluid mechanics has itself now become acknowledge as a powerful means of research. The IUTAM Symposium on Microgravity Fluid Mechanics has pro- vided the long-awaited forum for scientists from 15 coun- tries to discuss and concretize the "state-of-the-art" in this discipline. The main themes treated are: Interface Phe- nomena, Convective Processes; Marangoni effects, Solidifica- tion, Combustion, Physico-Chemical Processes, Multiphase Phenomena, Residual Acceleration effects, Fluid Handling and Non-Newtonian Flows.

Composite structures and products have developed tremendously since the publication of the first edition of this work in 1986. This new edition of the now classic 1986 text has been written to educate the engineering reader in the various aspects of mechanics for using composite materials in the design and analysis of composite structures and products. Areas dealt with include manufacture, micromechanical properties, structural design, joints and bonding and a much needed introduction to composite design philosophy. Each chapter is concluded by numerous problems suitable for home assignments or examination. A solution guide is available on request from the authors.

This book was developed while I was teaching graduate courses on analysis, design and optimization of structures, in the United States, Europe and Israel. Structural analysis is a main part of any design problem, and the analysis often must be repeated many times during the design process. Much work has been done on design-oriented analysis of structures recently and many studies have been published. The purpose of the book is to collect together selected topics of this literature and to present them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. This should prove useful to students, researchers, consultants and practicing engineers involved in analysis and design of structures. Previous books on structural analysis do not cover most of the material presented in the book. The book deals with the problem of multiple repeated analyses (reanalysis) of structures that is common to numerous analysis and design tasks. Reanalysis is needed in many areas such as structural optimization, analysis of damaged structures, nonlinear analysis, probabilistic analysis, controlled structures, smart structures and adaptive structures. It is related to a wide range of applications in such fields as Aerospace Engineering, Civil Engineering, Mechanical Engineering and Naval Architecture.

Since the first edition of this book was published, there have been major improve- TM TM ments in symbolic mathematical languages such as Maple and Mathematica and this has opened up the possibility of solving considerably more complex and hence interesting and realistic elasticity problems as classroomexamples. It also enables the student to focus on the formulation of the problem (e. g. the appropriate governing equations and boundary conditions) rather than on the algebraic manipulations, with a consequent improvement in insight into the subject and in motivation. During the past 10 years I have developed files in Maple and Mathematica to facilitate this p- cess, notably electronic versions of the Tables in the present Chapters 19 and 20 and of the recurrence relations for generating spherical harmonics. One purpose of this new edition is to make this electronic material available to the reader through the Kluwer website www. elasticity. org. I hope that readers will make use of this resource and report back to me any aspects of the electronic material that could benefit from improvement or extension. Some hints about the use of this material are contained in Appendix A. Those who have never used Maple or Mathematica will find that it takes only a few hours of trial and error to learn how to write programs to solve boundary value problems in elasticity.

A IUTAM (International Union of Theoretical and Applied Mechanics) Sympo sium 'Mechanics and Physics of Bubbles in Liquids' was held at Pasadena, Calif., USA from 15 through 19 June 1981. The present volume contains the printed version of nearly all papers read at the Symposium. The study of the behaviour of bubbles in liquids was originally stimu lated by problems in cavitation and in boiling ofliquids. Today research is initiated by problems in many other fields as well. In this respect a growing interest from the side of biomechanics may be mentioned. Ordering of the papers could be done either according to the various mechanical and physical aspects of the subject or according to the fields of application. The presentaton at the Symposium contained a bit of both; there was a session on physico-chemical aspects for example and also a session on biological applications. The subdivision in this volume follows roughly the sessions in the Symposium. Most of them start with a paper of a survey nature, reporting progress made in recent years. Here, as in other fields of engineering science, one notes the important part played by experimental techniques and by numerical analysis.