"TRB's National Cooperative Highway Research Program (NCHRP) Report 709: Investigation of Short-Term Laboratory Aging of Neat and Modified Asphalt Binders provides a proposed method of testing for short-term laboratory aging of neat and modified asphalt binders using the modified German rotating flask as an alternative to the rolling thin film oven test. The following appendixes A-E to NCHRP Report 709 are only available in electronic format."--

The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels

This book presents the most recent advances on testing and experimentation in civil engineering, especially in the branches of materials, structures, and buildings, complementing the authors’ publication Advances on Testing and Experimentation in Civil Engineering - Geotechnics, Transportation, Hydraulics and Natural Resources. It includes advances in physical modelling, monitoring techniques, data acquisition and analysis, and provides an invaluable contribution to the installation of new civil engineering experimental facilities. The first part of the book covers the latest advances in the testing and experimentation of key domains of materials, such as bio-cementation and self-healing, durability, and recycled materials, as well as the new environmental requirements related to the presence of hazardous substances in construction materials. Furthermore, laboratory and in situ tests, together with equipment needed to estimate the behaviour and durability of construction materials are presented, updating the most important technological advances. The second part of the book highlights the relevance of testing and monitoring in structures, including in situ tests related to static load tests, dynamic tests, and long-term monitoring strategies, as well as laboratory tests of adhesive joints. Experimental tests on shake tables and blast-resistant structures are also described. Recent applications of drone technologies for the inspection and monitoring of civil structures are another important theme developed. Finally, in its third part, the book presents new developments in the characterisation of building testing, with the support of modelling, to assess building pathology and new requirements, acoustic comfort, fire safety, visual comfort, and energy consumption.

This report develops procedures and associated criteria for laboratory conditioning of asphalt mixtures to simulate short-term aging. The report presents proposed changes to the American Association of State Highway and Transportation Officials (AASHTO) R 30, Mixture Conditioning of Hot-Mix Asphalt (HMA), and a proposed AASHTO practice for conducting plant aging studies. The report will be of immediate interest to materials engineers in state highway agencies and the construction industry with responsibility for design and production of hot and warm mix asphalt.

The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.

Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.