Introduction to Wastewater Treatment Processes considers various types of wastewater problems and the selection of proper mode of treatment, as well as the design of the equipment required. This book is divided into eight chapters and begins with a summary of the theory involved in the specific process, such as chemical kinetics and material and energy balances. The next chapter deals with the physical and chemical principles of wastewater treatment processes. These topics are followed by discussions of the important design parameters involved in the process and the determination of such parameters using laboratory-scale or pilot-plant equipment. Other chapters explore the development of a systematic design procedure for the treatment plant. The final chapters look into the mathematical modeling of biological treatment processes. This book will prove useful to practicing engineers and students.

Introduction to Wastewater Treatment Processes, Second Edition presents the principles of chemical kinetics, reactor design, and the mechanism of biological treatment processes. This book provides the numerical applications that illustrate the treatment of laboratory data. Organized into eight chapters, this edition begins with an overview of the engineering design of process plants for treatment of wastewaters of industrial or domestic origin. This text then examines the various empirical methods for evaluation of concentration of contaminants in wastewaters. Other chapters consider the various types of primary treatment of wastewater, including sedimentation, screening, flotation, and neutralization and equalization. This book discusses as well the stationary film theory applied to the case of oxygen transfer. The final chapter deals with tertiary or advanced wastewater treatment, which consists of processes designed to achieve higher effluent quality than conventional secondary treatment. This book is a valuable resource for practicing engineers and students who are interested in the field of wastewater treatment.

Principles of Water and Wastewater Treatment Processes is the third book in the Water and Wastewater Process Technologies Series. The book outlines the principle unit operations that are involved in the separation, degradation and utilisation of organic and inorganic matter during water and wastewater treatment. The module builds on the subjects of chemistry, biology and engineering covered in Process Science and Engineering for Water and Wastewater Treatment (Module 1) and provides a descriptive introduction to unit operations that are further described with design and operational details in later books in the series. The text of Principles of Water and Wastewater Treatment Processes has been divided into the following Units: Water Quality Process Flowsheeting Physical Processes Chemical Processes Sorption Processes Biological Processes Membrane Processes Sludge Treatment Utilisation Odour Management These units have has been designed for individual self-paced study that includes photographs, illustrations and tables and describe the form, function and application of unit operations for the treatment of water and wastewater. Each section of the text gives step-by-step learning in a particular subject, that includes an approximation of how long you will need to spend on that section and provides key points that highlight the principles of the different sections. Each unit includes exercises to help understand the material in the text, self-assessment questions to test your understanding and text references.

Basic Principles of Wastewater Treatment is the second volume in the series Biological Wastewater Treatment, and focusses on the unit operations and processes associated with biological wastewater treatment. The major topics covered are: microbiology and ecology of wastewater treatment reaction kinetics and reactor hydraulics conversion of organic and inorganic matter sedimentation aeration The theory presented in this volume forms the basis upon which the other books of the series are built. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Wastewater Characteristics, Treatment and Disposal; Volume 3: Waste Stabilisation Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors; Volume 6: Sludge Treatment and Disposal

Industrial Wastewater Treatment, Recycling and Reuse is an accessible reference to assist you when handling wastewater treatment and recycling. It features an instructive compilation of methodologies, including advanced physico-chemical methods and biological methods of treatment. It focuses on recent industry practices and preferences, along with newer methodologies for energy generation through waste. The book is based on a workshop run by the Indus MAGIC program of CSIR, India. It covers advanced processes in industrial wastewater treatment, applications, and feasibility analysis, and explores the process intensification approach as well as implications for industrial applications. Techno-economic feasibility evaluation is addressed, along with a comparison of different approaches illustrated by specific case studies. Industrial Wastewater Treatment, Recycling and Reuse introduces you to the subject with specific reference to problems currently being experienced in different industry sectors, including the petroleum industry, the fine chemical industry, and the specialty chemicals manufacturing sector. - Provides practical solutions for the treatment and recycling of industrial wastewater via case studies - Instructive articles from expert authors give a concise overview of different physico-chemical and biological methods of treatment, cost-to-benefit analysis, and process comparison - Supplies you with the relevant information to make quick process decisions

Industrial Water Treatment Process Technology begins with a brief overview of the challenges in water resource management, covering issues of plenty and scarcity-spatial variation, as well as water quality standards. In this book, the author includes a clear and rigorous exposition of the various water resource management approaches such as: separation and purification (end of discharge pipe), zero discharge approach (green process development), flow management approach, and preservation and control approach. This coverage is followed by deeper discussion of individual technologies and their applications. - Covers water treatment approaches including: separation and purification—end of discharge pipe; zero discharge approach; flow management approach; and preservation and control approach - Discusses water treatment process selection, trouble shooting, design, operation, and physico-chemical and treatment - Discusses industry-specific water treatment processes

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

Wastewater Characteristics, Treatment and Disposal is the first volume in the series Biological Wastewater Treatment, presenting an integrated view of water quality and wastewater treatment. The book covers the following topics: wastewater characteristics (flow and major constituents) impact of wastewater discharges to rivers and lakes overview of wastewater treatment systems complementary items in planning studies. This book, with its clear and practical approach, lays the foundations for the topics that are analysed in more detail in the other books of the series. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilisation Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors; Volume 6: Sludge Treatment and Disposal

This book presents recent developments in advanced biological treatment technologies that are attracting increasing attention or that have a high potential for large-scale application in the near future. It also explores the fundamental principles as well as the applicability of the engineered bioreactors in detail. It describes two of the emerging technologies: membrane bioreactors (MBR) and moving bed biofilm reactors (MBBR), both of which are finding increasing application worldwide thanks to their compactness and high efficiency. It also includes a chapter dedicated to aerobic granular sludge (AGS) technology, and discusses the main features and applications of this promising process, which can simultaneously remove organic matter, nitrogen and phosphorus and is considered a breakthrough in biological wastewater treatment. Given the importance of removing nitrogen compounds from wastewater, the latest advances in this area, including new processes for nitrogen removal (e.g. Anammox), are also reviewed. Developments in molecular biology techniques over the last twenty years provide insights into the complex microbial diversity found in biological treatment systems. The final chapter discusses these techniques in detail and presents the state-of-the-art in this field and the opportunities these techniques offer to improve process performance.