This revised edition provides professionals with an up-to-date introduction to third generation (3G) mobile communication system principles, concepts, and applications, without the use of advanced mathematics. This newly revised edition of an Artech House bestseller provides professionals with an up-to-date introduction to third generation (3G) mobile communication system principles, concepts, and applications, without the use of advanced mathematics. The second edition ncludes an even more thorough treatment of potential 3G applications and descriptions of new, emerging technologies.

Summarizes and surveys current LTE technical specifications and implementation options for engineers and newly qualified support staff Concentrating on three mobile communication technologies, GSM, 3G-WCDMA, and LTE—while majorly focusing on Radio Access Network (RAN) technology—this book describes principles of mobile radio technologies that are used in mobile phones and service providers’ infrastructure supporting their operation. It introduces some basic concepts of mobile network engineering used in design and rollout of the mobile network. It then follows up with principles, design constraints, and more advanced insights into radio interface protocol stack, operation, and dimensioning for three major mobile network technologies: Global System Mobile (GSM) and third (3G) and fourth generation (4G) mobile technologies. The concluding sections of the book are concerned with further developments toward next generation of mobile network (5G). Those include some of the major features of 5G such as a New Radio, NG-RAN distributed architecture, and network slicing. The last section describes some key concepts that may bring significant enhancements in future technology and services experienced by customers. Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G covers the types of Mobile Network by Multiple Access Scheme; the cellular system; radio propagation; mobile radio channel; radio network planning; EGPRS - GPRS/EDGE; Third Generation Network (3G), UMTS; High Speed Packet data access (HSPA); 4G-Long Term Evolution (LTE) system; LTE-A; and Release 15 for 5G. Focuses on Radio Access Network technologies which empower communications in current and emerging mobile network systems Presents a mix of introductory and advanced reading, with a generalist view on current mobile network technologies Written at a level that enables readers to understand principles of radio network deployment and operation Based on the author’s post-graduate lecture course on Wireless Engineering Fully illustrated with tables, figures, photographs, working examples with problems and solutions, and section summaries highlighting the key features of each technology described Written as a modified and expanded set of lectures on wireless engineering taught by the author, Introduction to Mobile Network Engineering: GSM, 3G-WCDMA, LTE and the Road to 5G is an ideal text for post-graduate and graduate students studying wireless engineering, and industry professionals requiring an introduction or refresher to existing technologies.

The traditionally separate Fixed, Mobile, and Internet sectors have been evolving recently toward a single sector, offering numerous implications for those involved in technology and business. It is therefore essential for telecommunication professionals to get a keen grasp of where the industry is heading. Providing a solid foundation in the industry, Introduction to Mobile Communications: Technology, Services, Markets explores the core requirements of modern mobile telecommunications-from markets to technology. It explains how wireless systems work, how mobility is supported, the underlying infrastructure, and what interactions are needed among the different functional components. The book also examines how mobile communications are evolving in order to meet the changing needs of users. The information provided in the book comes primarily from the four core modules of the Certificate in Mobile Communications Distance Learning program run by the Informa Telecoms Academy in London. Designed by a highly experienced training development team, the program examines the complex and fascinating world of mobile communications. Designed to give a broad picture of mobile communications, the book provides an excellent grounding for those involved in both business and engineering-leaving them much better equipped to fulfill roles within their current or prospective companies

The mobile information society has revolutionised the way we work, communicate and socialise. Mobile phones, wireless free communication and associated technologies such as WANs, LANs, and PANs, cellular networks, SMS, 3G, Bluetooth, Blackberry and WiFi are seen as the driving force of the advanced society. The roots of today's explosion in wireless technology can be traced back to the deregulation of AT&T in the US and the Post Office and British Telecom in the UK, as well as Nokia's groundbreaking approach to the design and marketing of the mobile phone. Providing a succinct introduction to the field of mobile and wireless communications, this book: Begins with the basics of radio technology and offers an overview of key scientific terms and concepts for the student reader Addresses the social and economic implications of mobile and wireless technologies, such as the effects of the deregulation of telephone systems Uses a range of case studies and examples of mobile and wireless communication, legislation and practices from the UK, US, Canada, mainland Europe, the Far East and Australia Contains illustrations and tables to help explain technical concepts and show the growth and change in mobile technologies Features a glossary of technical terms, annotated further reading at the end of each chapter and web links for further study and research Mobile and Wireless Communicationsis a key resource for students on a range of social scientific courses, including media and communications, sociology, public policy, and management studies, as well as a useful introduction to the field for researchers and general readers.

3G networks: architecture, planning, migration, management, and optimization. Network architectures, planning, management, and optimization 3G air interfaces: UTRA/W-CDMA and cdma2000 3G data services: UTRA/W-CDMA, cdma2000, GPRS, and EDGE Evolutionary paths for 2G networks WLL, WAP, and more New 3G systems will trigger an explosion in wireless Internet and data applications by delivering far higher data rates than have ever been possible in wireless systems before. In "Wireless Network Evolution: 2G to 3G," renowned wireless expert Vijay K. Garg covers key 3G standard and every technical issue associated with planning, management, and optimization of 3G systems. Garg reviews the fundamental principles underlying existing 2G systems, then offers specific, practical guidance on migration to 3G. Coverage includes: 3G standards activities 3G European and North American systems 3G data services for UTRA/W-CDMA, cdma2000, GPRS, and EDGE networks Wireless Application Protocol (WAP) and 3G systems Major 3G enhancements for WLL applications New RF optimization techniques for 3G systems "Wireless Network Evolution: 2G to 3G" will be an invaluable resource for every practicing telecommunications engineer and technical decision maker involved in 3G planning, deployment, or management.

Mobile and wireless communications applications have a clear impact on improving the humanity wellbeing. From cell phones to wireless internet to home and office devices, most of the applications are converted from wired into wireless communication. Smart and advanced wireless communication environments represent the future technology and evolutionary development step in homes, hospitals, industrial, vehicular and transportation systems. A very appealing research area in these environments has been the wireless ad hoc, sensor and mesh networks. These networks rely on ultra low powered processing nodes that sense surrounding environment temperature, pressure, humidity, motion or chemical hazards, etc. Moreover, the radio frequency (RF) transceiver nodes of such networks require the design of transmitter and receiver equipped with high performance building blocks including antennas, power and low noise amplifiers, mixers and voltage controlled oscillators. Nowadays, the researchers are facing several challenges to design such building blocks while complying with ultra low power consumption, small area and high performance constraints. CMOS technology represents an excellent candidate to facilitate the integration of the whole transceiver on a single chip. However, several challenges have to be tackled while designing and using nanoscale CMOS technologies and require innovative idea from researchers and circuits designers. While major researchers and applications have been focusing on RF wireless communication, optical wireless communication based system has started to draw some attention from researchers for a terrestrial system as well as for aerial and satellite terminals. This renewed interested in optical wireless communications is driven by several advantages such as no licensing requirements policy, no RF radiation hazards, and no need to dig up roads besides its large bandwidth and low power consumption. This second part of the book, Mobile and Wireless Communications: Key Technologies and Future Applications, covers the recent development in ad hoc and sensor networks, the implementation of state of the art of wireless transceivers building blocks and recent development on optical wireless communication systems. We hope that this book will be useful for students, researchers and practitioners in their research studies.

All IP in 3G CDMA Networks covers all the key aspects of UMTS and its implementation from both the engineering designer and the operator and service providers' point of view. It addresses the essential tasks involved in the UMTS network deployment in new regions and within existing 2G/2.5G networks. Key features: Presents solutions for the integration and coexistence of 2G and 3G systems and highlights the seamless interoperability functions between GSM and UMTS. As part of the evolution towards All IP cellular networks, it outlines the IP Multimedia Subsystem - IMS and the packet optimized Radio Access Network, including High Speed Download Packet Access. Provides a complete picture of broadband wireless through UMTS, whilst describing applications enabler platforms and the criteria for 3G services that enhance the user experience. By providing one integrated source in UMTS and its evolution, All IP in 3G CDMA Networks represents an invaluable resource for design engineers, operators and services providers. Likewise, Technical and Marketing Executives and Managers in wireless communications or related areas, and Business or Sales channels representatives, will benefit from this concise volume in 3G networks and services enablers. Academic programmes in Telecommunications and Information Technology segments at senior or postgraduate level, will also find valuable contributions in this book.

Mobile network is a communication network which is distributed over land areas by cells. These cells are provided with network coverage by base transceiver stations. These can be used further for transmission of data and voice. Mobile communication helps us in communicating with others in different locations without the use of wires and cables. Mobile networks are the backbone of telecommunications. There are several standards of digital cellular networks. These include GSM, CDMA, VoLTE, etc. The set of frequency ranges which fall within the ultra high frequency band are known as cellular frequencies. They are assigned for mobile phones so that it can connect it to cellular networks. These networks have evolved through generations. These generations are 1G, 2G, 3G and 4G, and the latest technology is 5G. This book elucidates the concepts and innovative models around prospective developments with respect to mobile communications and networks. It explores all the important aspects of this field in the present day scenario. The book is appropriate for those seeking detailed information in this area.

Highly regarded as the book on the air interface of 3G cellular systems WCDMA for UMTS has again been fully revised and updated. The third edition now covers the key features of 3GPP Release 6 ensuring it remains the leading principal resource in this constantly progressing area. By providing a deep understanding of the WCDMA air interface, the practical approach of this third edition will continue to appeal to operators, network and terminal manufacturers, service providers, university students and frequency regulators. Explains the key parts of the 3GPP/WCDMA standard Presents network dimensioning, coverage and capacity of WCDMA Introduces TDD and discusses its differences from FDD Key third edition updates include: Covers the main 3GPP Release 6 updates Further enhances High Speed Downlink Packet Access (HSDPA) chapter with a number of new simulation results Explains High Speed Uplink Packet Access (HSUPA) study item Introduces the new services including their performance analysis : Push-to-Talk over Cellular (PoC), streaming, See What I See (SWIS) and multiplayer games Presents a number of new WCDMA field measurement results: capacity, end-to-end performance and handovers Includes completely updated antenna beamforming and multiuser detection sections featuring new simulation results Introduces TD-SCDMA and compares it to Release TDD

Provides a thorough introduction to the development, operation, maintenance, and troubleshooting of mobile communications systems Mobile Communications Systems Development: A Practical Introduction for System Understanding, Implementation, and Deployment is a comprehensive “how to” manual for mobile communications system design, deployment, and support. Providing a detailed overview of end-to-end system development, the book encompasses operation, maintenance, and troubleshooting of currently available mobile communication technologies and systems. Readers are introduced to different network architectures, standardization, protocols, and functions including 2G, 3G, 4G, and 5G networks, and the 3GPP standard. In-depth chapters cover the entire protocol stack from the Physical (PHY) to the Application layer, discuss theoretical and practical considerations, and describe software implementation based on the 3GPP standardized technical specifications. The book includes figures, tables, and sample computer code to help readers thoroughly comprehend the functions and underlying concepts of a mobile communications network. Each chapter includes an introduction to the topic and a chapter summary. A full list of references, and a set of exercises are also provided at the end of the book to test comprehension and strengthen understanding of the material. Written by a respected professional with more than 20 years’ experience in the field, this highly practical guide: Provides detailed introductory information on GSM, GPRS, UMTS, and LTE mobile communications systems and networks Describes the various aspects and areas of the LTE system air interface and its protocol layers Covers troubleshooting and resolution of mobile communications systems and networks issues Discusses the software and hardware platforms used for the development of mobile communications systems network elements Includes 5G use cases, enablers, and architectures that cover the 5G NR (New Radio) and 5G Core Network Mobile Communications Systems Development is perfect for graduate and postdoctoral students studying mobile communications and telecom design, electronic engineering undergraduate students in their final year, research and development engineers, and network operation and maintenance personnel.