Interfacing PIC Microcontrollers, 2nd Edition is a great introductory text for those starting out in this field and as a source reference for more experienced engineers. Martin Bates has drawn upon 20 years of experience of teaching microprocessor systems to produce a book containing an excellent balance of theory and practice with numerous working examples throughout. It provides comprehensive coverage of basic microcontroller system interfacing using the latest interactive software, Proteus VSM, which allows real-time simulation of microcontroller based designs and supports the development of new applications from initial concept to final testing and deployment. - Comprehensive introduction to interfacing 8-bit PIC microcontrollers - Designs updated for current software versions MPLAB v8 & Proteus VSM v8 - Additional applications in wireless communications, intelligent sensors and more

This book is targeted for students of electronics and computer sciences. The first part of the book contains 15 original applications working on the PIC microcontroller, including: lighting diodes, communication with RS232 (bit-banging), interfacing to 7-segment and LCD displays, interfacing to matrix keypad 3 x 4, working with PWM module and others. This material can be used to cover one semester's teaching of microcontroller programming or similar classes. The volume contains schematic diagrams and source codes with detailed descriptions. All tests were prepared on the basis of the original documentation (data sheets, application notes). The next three chapters: The Stack, Tables and Table Instruction and Data Memory pertain to PIC18F1320. Software referred to is also presented in assembly language. Finally the application of the PIC24FJ microcontroller with the 240x128 LCD display, T6963C and with accelerometer sensor, written in C are described.

The advent of interactive design software has allowed the simulation of microcontrollers without having to build and debug hardware. Interfacing PIC Microcontrollers: Embedded Design by Interactive Simulation discusses microcontroller design and applications. The book is divided into three parts. Part 1 introduces the PIC 16F877 architecture, software, and simulation system. Part 2 discusses interfacing techniques. Part 3 discusses power outputs, serial communication, sensor interfacing, and the design of MCU-based systems. Each topic is illustrated by designs based on the 16F877. The Proteus design software by Labcenter Electronics is used throughout. The book is suited for more advanced readers with prior knowledge of the basics of microcontroller systems.*Comprehensive coverage of a topic not widely explored in the wealth of PIC books on the market, concentrating on the popular PIC16F877 device*Circuit simulation software allows step-by-step examples, supplied as assembly source code, to be run interactively – aiding student, technician and hobbyist learning.*A companion website will provide downloads of application files used in the book and links to associated manufacturers

Offers a systematic approach to PIC programming and interfacing using Assembly and C languages. Offering numerous examples and a step-by-step approach, it covers both the Assembly and C programming languages and devotes separate chapters to interfacing with peripherals such as Timers, LCD, Serial Ports, Interrupts, Motors and more. A unique chapter on hardware design of the PIC system and the PIC trainer round out coverage. Systematic coverage of the PIC18 family of Microcontrollers. Assembly language and C language programming and interfacing techniques. Thorough coverage of Architectures and Assembly language programming of the PIC18. Thorough coverage of C language programming of the PIC18. Separate chapters on programming and interfacing the PIC with peripherals - Includes information on how to interface the PIC with LCD, keyboard, ADC, DAC, Sensors, Serial Ports, Timers, DC and Stepper Motors, Optoisolators, and RTC. Covers how to program each peripheral, first using the Assembly language and then using the C language. Those involved with PIC programming and interfacing using Assembly and C languages.

This book presents a thorough introduction to the Microchip PIC® microcontroller family, including all of the PIC programming and interfacing for all the peripheral functions. A step-by-step approach to PIC assembly language programming is presented, with tutorials that demonstrate how to use such inherent development tools such as the Integrated Development Environment MPLAB, PIC18 C compiler, the ICD2 in-circuit debugger, and several demo boards. Comprehensive coverage spans the topics of interrupts, timer functions, parallel I/O ports, various serial communications such as USART, SPI, I2C, CAN, A/D converters, and external memory expansion.

The situation we find ourselves today in the field of microcontrollers had its beginnings in the development of technology of integrated circuits. This development has enabled to store hundreds of thousands of transistors into one chip. That was a precondition for the manufacture of microprocessors and the first computers were made by adding external peripherals such as memory, input/output lines, timers, and others to it. Further increasing of package density resulted in creating an integrated circuit that contained both processors and peripherals. That is how the first chip containing a microcomputer later known as a microcontroller has developed. If you have not done it so far then it is high time to learn what the microcontrollers are and how they operate. Numerous illustrations and practical examples along with a detailed description of the PIC16F887 will make you enjoy your work with the PIC microcontrollers

The advent of interactive design software has allowed the simulation of microcontrollers without having to build and debug hardware. Interfacing PIC Microcontrollers: Embedded Design by Interactive Simulation discusses microcontroller design and applications. The book is divided into three parts. Part 1 introduces the PIC 16F877 architecture, software, and simulation system. Part 2 discusses interfacing techniques. Part 3 discusses power outputs, serial communication, sensor interfacing, and the design of MCU-based systems. Each topic is illustrated by designs based on the 16F877. The Proteus design software by Labcenter Electronics is used throughout. The book is suited for more advanced readers with prior knowledge of the basics of microcontroller systems. *Comprehensive coverage of a topic not widely explored in the wealth of PIC books on the market, concentrating on the popular PIC16F877 device *Circuit simulation software allows step-by-step examples, supplied as assembly source code, to be run interactively - aiding student, technician and hobbyist learning. *A companion website will provide downloads of application files used in the book and links to associated manufacturers.

This book is targeted for students of electronics and computer sciences. The first part of the book contains 15 original applications working on the PIC microcontroller, including: lighting diodes, communication with RS232 (bit-banging), interfacing to 7-segment and LCD displays, interfacing to matrix keypad 3 x 4, working with PWM module and others. This material can be used to cover one semester's teaching of microcontroller programming or similar classes.The volume contains schematic diagrams and source codes with detailed descriptions. All tests were prepared on the basis of the original documentation (data sheets, application notes). The next three chapters: The Stack, Tables and Table Instruction and Data Memory pertain to PIC18F1320. Software referred to is also presented in assembly language. Finally the application of the PIC24FJ microcontroller with the 240x128 LCD display, T6963C and with accelerometer sensor, written in C are described.

This book presents a thorough introduction to the Microchip PIC microcontroller family, including all of the PIC programming and interfacing for all the peripheral functions. A step-by-step approach to PIC assembly language programming is presented, with tutorials that demonstrate how to use such inherent development tools such as the Integrated Development Environment MPLAB, PIC18 C compiler, the ICD2 in-circuit debugger, and several demo boards. Comprehensive coverage spans the topics of interrupts, timer functions, parallel I/O ports, various serial communications such as USART, SPI, I2C, CAN, A/D converters, and external memory expansion.

Microcontrollers are present in many new and existing electronic products, and the PIC microcontroller is a leading processor in the embedded applications market. Students and development engineers need to be able to design new products using microcontrollers, and this book explains from first principles how to use the universal development language C to create new PIC based systems, as well as the associated hardware interfacing principles. The book includes many source code listings, circuit schematics and hardware block diagrams. It describes the internal hardware of 8-bit PIC microcontroller, outlines the development systems available to write and test C programs, and shows how to use CCS C to create PIC firmware. In addition, simple interfacing principles are explained, a demonstration program for the PIC mechatronics development board provided and some typical applications outlined. - Focuses on the C programming language which is by far the most popular for microcontrollers (MCUs) - Features Proteus VSMg the most complete microcontroller simulator on the market, along with CCS PCM C compiler, both are highly compatible with Microchip tools - Extensive downloadable content including fully worked examples