Thin films can be used to fabricate optoelectronic devices. Technology is currently focusing on ternary thin film composition because of their structure, inter-band transitions and other optical properties that can be maximized. This book discusses in detail the optical characteristics of ternary thin films and further investigates the behavior of Iron Zinc Sulphide, Lead Silver Sulphide, Copper Silver Sulphide, Copper Zinc Sulphide and Cadmium Zinc Sulphide. Thin films are of fundamental importance in modern technology.

The book is devoted to the design, application and characterization of thin films and structures, with special emphasis on optical applications. It comprises ten papers—five featured and five regular—authored by scientists all over the world. Diverse materials are studied and their possible applications are demonstrated and discussed—transparent conductive coatings and structures from ZnO doped with Al and Ga and Ti-doped SnO2, polymers and nanosized zeolite thin films for optical sensing, TiO2 with linear and nonlinear optical properties, organic diamagnetic materials, broadband optical coatings, CrWN glass molding coatings, and silicon on insulator waveguides.

This new volume of the highly respected Physics of Thin Films Serial discusses inhomogeneity in real films and surfaces. The volume, guest-edited by K. Vedam, follows the growth of thin films both from the surface of the substrate, and from the atomic level, layer by layer. The text features coverage of Real-Time Spectroscopic Ellipsometry (RTSE) and Reflectance Anisotropy (RA), two major breakthrough optical techniques used to characterize real time and insitu films and surfaces. In six insightful chapters, the contributors assess the impact of these techniques, their strengths and limitations, and their potential for further development.

This dissertation, "Preparation and Post-annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films" by Rongxin, Wang, 王榮新, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled PREPARATION AND POST-ANNEALING EFFECTS ON THE OPTICAL PROPERTIES OF INDIUM TIN OXIDE THIN FILMS Submitted by WANG Rong Xin for the degree of Doctor of Philosophy at The University of Hong Kong in April 2005 Many opto-electronic devices, such as III-V compound devices, liquid crystal displays, solar cells, organic and inorganic light emitting devices, and ultraviolet photodetectors, demand transparent electrode materials simultaneously having high electrical conductance. To meet the requirements for particular applications, a great deal of basic research and studies have been carried out on the electrical and optical properties of these materials. As a most promising candidate for such materials, indium tin oxide (ITO) has attracted interest in recent years. Furthermore, ITO has many unique properties such as excellent adhesion on the substrate, thermal stability and ease of patterning. The deposition of high-quality ITO thin films is a key step for successful application of ITO thin films as transparent electrode materials. To obtain optimal electrical and optical properties of ITO films, the growth parameters and conditions must be determined. Moreover, the optical and electrical properties of ITO contact layers, which can either be on the top side or the bottom side of a device, are influenced by various post-deposition treatments. For the present work, ITO thin films were deposited on glass and quartz substrates using e-beam evaporation with different deposition rates. The influence of substrate material, deposition rate, deposition gas environment and post-deposition annealing on the optical properties of the films was investigated in detail. Atomic force microscopy, X-ray diffraction and X-ray photoemission spectroscopy was employed to obtain information on the chemical state and crystallization of the films. Analysis of these data suggests that the substrate material, deposition rate, deposition gas environment and post-deposition annealing conditions strongly affect the chemical composition and the microstructure of the ITO films and these in turn influence the optical properties of the film. Oxygen incorporation transfers the In O phase to the In O phase and removes metallic In to form both indium oxide 2 3-x 2 3 phases. Both of these reactions are beneficial for the optical transmittance of ITO thin films. Moreover, it was found that the incorporation and decomposition reactions of oxygen can be controlled so as to change the optical properties of the ITO thin films reversibly. DOI: 10.5353/th_b3154617 Subjects: Thin films - Optical properties Indium compounds Annealing of metals

This work presents advances in thin films for applications in the fields of integrated optics, micro-optics, optical telecommunications and optoelectronics. It delineates the performance characteristics needed for graded coatings, damage-resistant laser coatings and many others. Basic theory and applications are illustrated.

Authoritative reference treats the formation, structure, optical properties, and uses of thin solid films, emphasizing causes of their unusual qualities. 162 figures. 19 tables. 1955 edition.

Learn more about foundational and advanced topics in polymer thin films and coatings besides species with this powerful two-volume resource The two-volume Inorganic and Organic Thin Films: Fundamentals, Fabrication, and Applications delivers a foundational resource for current researchers and commercial users involved in the design and fabrication of thin films. The book offers newcomers to the field a thorough description of new design theory, fabrication methods, and applications of advanced thin films. Readers will discover the physics and chemistry underlying the manufacture of new thin films and coatings in this leading new resource that promises to become a handbook for future applications of the technology. This one-stop reference brings together all important aspects of inorganic and polymeric thin films and coatings, including construction, assembly, deposition, functionality, patterning, and characterization. Explorations of their applications in industries as diverse as information technology, new energy, biomedical engineering, aerospace, and oceanographic engineering round out this fulsome exploration of one of the most exciting and rapidly developing areas of scientific and industrial research today. Readers will also learn from: A comprehensive introduction to the progress of thin films and coatings as well as fundamentals in functional thin films and coatings An exploration of multi-layered magnetic thin films for electron transport control and signal sensing, including giant magnetoresistance, colossal magnetoresistance, tunneling magnetoresistance, and the quantum anomalous Holzer effect An in time summary of high-quality magneto-optics, nanophotonics, spin waves and spintronics using bismuth-substituted iron garnet thin films as examples A thorough discussion of template-assisted fabrication of nanostructure thin films for ultrasensitive detection of chemicals and biomolecules A treatment of biomass derived functional films and coatings Perfect for materials scientists and inorganic chemists, Inorganic and Organic Thin Films will also earn a place in the libraries of solid state physicists and physical chemists working in private industry, as well as polymer and surface chemists who seek to improve their understanding of thin films and coatings.

This book is an up-to-date survey of the major optical characterization techniques for thin solid films. Emphasis is placed on practicability of the various approaches. Relevant fundamentals are briefly reviewed before demonstrating the application of these techniques to practically relevant research and development topics. The book is written by international top experts, all of whom are involved in industrial research and development projects.