Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems presents a comprehensive introduction to the use of frequency domain and polynomial system design techniques for a range of industrial control and signal processing applications. The solution of stochastic and robust optimal control problems is considered, building up from single-input problems and gradually developing the results for multivariable design of the later chapters. In addition to cataloguing many of the results in polynomial systems needed to calculate industrial controllers and filters, basic design procedures are also introduced which enable cost functions and system descriptions to be specified in order to satisfy industrial requirements. Providing a range of solutions to control and signal processing problems, this book: * Presents a comprehensive introduction to the polynomial systems approach for the solution of H_2 and H_infinity optimal control problems. * Develops robust control design procedures using frequency domain methods. * Demonstrates design examples for gas turbines, marine systems, metal processing, flight control, wind turbines, process control and manufacturing systems. * Includes the analysis of multi-degrees of freedom controllers and the computation of restricted structure controllers that are simple to implement. * Considers time-varying control and signal processing problems. * Addresses the control of non-linear processes using both multiple model concepts and new optimal control solutions. Robust Industrial Control Systems: Optimal Design Approach for Polynomial Systems is essential reading for professional engineers requiring an introduction to optimal control theory and insights into its use in the design of real industrial processes. Students and researchers in the field will also find it an excellent reference tool.

The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.

Bridging the gap between research and industry, this volume systematically and comprehensively presents the latest advances in control and estimation. With emphasis on applications, industrial problems illustrate the use of transfer function and state space methods for modelling and design. Combining theroy with practice, Industrial Control Systems Design will appeal to practising engineers and academic researchers in control engineering. This unique reference: * spans fundamental state space and polynomial systems theory and introduces quantitative feedback theory. * Includes design case studies with illustrative problem descriptions and analysis from the steel, marine, process control, aerospace and power generation sectors. * Focuses on the challenges in predictive optimal control, now an indispensable method in advanced control applications. * Provides an introduction to safety-critical control systems design and combined fault monitoring and control techniques. * Discusses the design of LQG and H-controllers with several degrees of freedom, including feedback, tracking and feedforward functions.

The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).

Industrial Process Automation Systems: Design and Implementation is a clear guide to the practicalities of modern industrial automation systems. Bridging the gap between theory and technician-level coverage, it offers a pragmatic approach to the subject based on industrial experience, taking in the latest technologies and professional practices.Its comprehensive coverage of concepts and applications provides engineers with the knowledge they need before referring to vendor documentation, while clear guidelines for implementing process control options and worked examples of deployments translate theory into practice with ease.This book is an ideal introduction to the subject for junior level professionals as well as being an essential reference for more experienced practitioners. - Provides knowledge of the different systems available and their applications, enabling engineers to design automation solutions to solve real industry problems - Includes case studies and practical information on key items that need to be considered when procuring automation systems - Written by an experienced practitioner from a leading technology company

In recent decades, a comprehensive new framework for the theory and design of control systems has emerged. It treats a range of significant and ubiquitous design problems more effectively than the conventional framework. Control Systems Design brings together contributions from the originators of the new framework in which they explain, expand and revise their research work. It is divided into four parts: - basic principles, including those of matching and inequalities with adjustments for robust matching and matching based on H-infinity methods and linear matrix inequalities; - computational methods, including matching conditions for transient inputs and design of a sampled-data control system; - search methods including search with simulated annealing, genetic algorithms and evaluation of the node array method; - case studies, including applications in distillation, benchmarking critical control of magnetic levitation systems and the use of the principle of matching in cruise control.

Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS

Nonlinear Industrial Control Systems presents a range of mostly optimisation-based methods for severely nonlinear systems; it discusses feedforward and feedback control and tracking control systems design. The plant models and design algorithms are provided in a MATLAB® toolbox that enable both academic examples and industrial application studies to be repeated and evaluated, taking into account practical application and implementation problems. The text makes nonlinear control theory accessible to readers having only a background in linear systems, and concentrates on real applications of nonlinear control. It covers: different ways of modelling nonlinear systems including state space, polynomial-based, linear parameter varying, state-dependent and hybrid; design techniques for nonlinear optimal control including generalised-minimum-variance, model predictive control, quadratic-Gaussian, factorised and H∞ design methods; design philosophies that are suitable for aerospace, automotive, marine, process-control, energy systems, robotics, servo systems and manufacturing; steps in design procedures that are illustrated in design studies to define cost-functions and cope with problems such as disturbance rejection, uncertainties and integral wind-up; and baseline non-optimal control techniques such as nonlinear Smith predictors, feedback linearization, sliding mode control and nonlinear PID. Nonlinear Industrial Control Systems is valuable to engineers in industry dealing with actual nonlinear systems. It provides students with a comprehensive range of techniques and examples for solving real nonlinear control design problems.

This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.