* Tackles the complex environmental issue of Indoor Air Quality (IAQ) for industrial hygienists, HVAC engineers, architects and anyone else concerned with the air quality of interiors * Infused with charts, tables, and all the major formulas and calculations necessary to monitor and characterize a particular environment * Includes all relevant codes, standards and guidelines

People live in indoor environment about 90% of lifetime and an adult inhales about 15 kg air each day, over 75% of the human body’s daily mass intake (air, food, water). Therefore, indoor air quality (IAQ) is very important to human health. This book provides the basic knowledge of IAQ and highlights the research achievements in the past two decades. It covers the following 12 sections: introduction, indoor air chemicals, indoor air particles, measurement and evaluation, source/sink characteristics, indoor chemistry, human exposure to indoor pollutants, health effects and health risk assessment, IAQ and cognitive performance, standards and guidelines, IAQ control, and air quality in various indoor environments. It provides a combination of an introduction to various aspects on IAQ studies, the current state-of-knowledge, various advances and the perspective of IAQ studies. It will be very helpful for the researchers and technicians in the IAQ and the related fields. It is also useful for experts in other fields and general readers who want to obtain a basic understanding of and research advances in the field of IAQ. A group of experts in IAQ research have been recruited to write the chapters. Their research interests and experience cover the scope of the book. In addition, some experienced experts in IAQ field have been invited as advisors or reviewers to give their comments, suggestions and revisions on the handbook framework and the chapter details. Their contribution guarantees the quality of the book. We are very grateful to them. Last but not least, we express our heartfelt thanks to Prof. Spengler, Harvard University, for writing the foreword of the current Handbook of Indoor Air Quality both as a pioneer scientist who contributed greatly to indoor air science and as an Editor-in-chief of Handbook of Indoor Air Quality 2001, 1st ed. New York: McGraw-Hill. In addition to hard copies, the book is also published online and will be updated by the authors as needed to keep it aligned with current knowledge. These salient features can make the handbook fresh with the research development.

Mold, radon, and poor indoor air quality have made it into the news and into home insurance policies and builders' liability insurance

A comprehensive guide for both fundamentals and real-world applications of environmental engineering Written by noted experts, Handbook of Environmental Engineering offers a comprehensive guide to environmental engineers who desire to contribute to mitigating problems, such as flooding, caused by extreme weather events, protecting populations in coastal areas threatened by rising sea levels, reducing illnesses caused by polluted air, soil, and water from improperly regulated industrial and transportation activities, promoting the safety of the food supply. Contributors not only cover such timely environmental topics related to soils, water, and air, minimizing pollution created by industrial plants and processes, and managing wastewater, hazardous, solid, and other industrial wastes, but also treat such vital topics as porous pavement design, aerosol measurements, noise pollution control, and industrial waste auditing. This important handbook: Enables environmental engineers to treat problems in systematic ways Discusses climate issues in ways useful for environmental engineers Covers up-to-date measurement techniques important in environmental engineering Reviews current developments in environmental law for environmental engineers Includes information on water quality and wastewater engineering Informs environmental engineers about methods of dealing with industrial and municipal waste, including hazardous waste Designed for use by practitioners, students, and researchers, Handbook of Environmental Engineering contains the most recent information to enable a clear understanding of major environmental issues.

Indoor Air Quality: The Latest Sampling and Analytical Methods, Third Edition is a practical, user-friendly guide to the identification and assessment of the indoor air contaminants that contribute to building-related illness in commercial buildings, institutions, and residences. It covers the basic concepts of indoor air quality assessment, including its historic evolution. The book describes the most common substances encountered in an indoor air quality investigation, their health effects, and their occurrence in the environment. Drawing from the author’s experience, observations, and extensive research, this easy-to-read guide provides readers with a working knowledge of the latest approaches to sampling protocols and cutting-edge trends as well as suggested sampling strategies, helpful experience related tips, and a means for interpreting results. Additionally, in the later part of the book, there is considerable discussion of failure modes of building materials and systems—sources of many indoor air quality problems! This third edition details up-to-date strategies and analytical methods and addresses some of the more recent, as well as less common, concerns on indoor air pollutants. All chapters in the third edition have been updated to adhere to the more recent developments in indoor air quality. Also a new chapter on the illusive data and sampling approaches on ozone has been added. New in the Third Edition Revised and updated standards and guidelines Updated U.S. EPA NAAQS Updated LEEDv4 Standard Updated ANSI/ASHRAE Standard 189.1 Latest approaches to sampling and analytical methods Expanded discussion on controversial inhalable airborne particulate sampling methods Updated and expanded tables and data Updated and expanded figures and schematics Inclusion of a new chapter on ozone

This book presents WHO guidelines for the protection of public health from risks due to a number of chemicals commonly present in indoor air. The substances considered in this review, i.e. benzene, carbon monoxide, formaldehyde, naphthalene, nitrogen dioxide, polycyclic aromatic hydrocarbons (especially benzo[a]pyrene), radon, trichloroethylene and tetrachloroethylene, have indoor sources, are known in respect of their hazardousness to health and are often found indoors in concentrations of health concern. The guidelines are targeted at public health professionals involved in preventing health risks of environmental exposures, as well as specialists and authorities involved in the design and use of buildings, indoor materials and products. They provide a scientific basis for legally enforceable standards.

Winner of the Choice Outstanding Academic Titles of 2010 award. Ensuring that buildings are healthy and comfortable for their occupants is a primary concern of all architects and building engineers. This highly practical handbook will help make that process more efficient and effective. It begins with a guide to how the human body and senses react to different indoor environmental conditions, together with basic information on the parameters of the indoor environment and problems that can occur. It then moves on to give a background to the development of the study and control of the indoor environment, examining the main considerations (including thermal, lighting, indoor air and sound-related aspects) for a healthy and comfortable indoor environment and discussing the drivers for change in the field. The final section presents a new approach towards health and comfort in the indoor environment, where meeting the wishes and demands of the occupants with a holistic strategy becomes the over-riding priority. The book is filled with useful facts, figures and analysis, and practical methods that designers who are keen to assess and improve the user experience of their buildings will find invaluable.

This handbook has been prepared as a working reference for the safety officer, the environmental engineer, and the consultant. For the safety officer, this handbook provides detailed guidelines and instructions in preparing Right-to-Know Reporting Audits, establishing programs and training employees on hazard awareness, and developing and implementing emergency response programs in the workplace and at off-site operations.For the environmental engineer, this handbook provides extensive technical data on toxic chemical properties and detailed instructional aid on how to properly prepare toxic chemical release inventory reporting.For the environmental consultant, an extensive overview of corrective action technologies is provided.

Indoor air quality (IAQ) is increasingly making front-page headlines, and the magnitude of the problem is just beginning to surface. Designed for engineers and architects, this reference on IAQ includes coverage of the control and assessment of asbestos, radon, carbon monoxide and other contaminants; investigative procedures; measurement and monitoring techniques; inspection and testing; and bacteriological and biological issues.

Indoor Air Quality Engineering covers a wide range of indoor air quality engineering principles and applications, providing guidelines for identifying and analyzing indoor air quality problems as well as designing a system to mitigate these problems. Structured into three sections - properties and behavior of airborne pollutants, measurement and sampling efficiency, and air quality enhancement technologies - this book uses real-life examples, design problems, and solutions to illustrate engineering principles. Professionals and students in engineering, environmental sciences, public health, and industrial hygiene concerned with indoor air quality control will find Indoor Air Quality Engineering provides effective methods, technologies, and principles not traditionally covered in other texts.