Oxidation of alcohols, ethers, and sulfoxides by ozone in acetonitrile is catalyzed by submillimolar concentrations of Fe(CH3CN)62+. The catalyst provides both rate acceleration and greater selectivity toward the less oxidized products. For example, Fe(CH3CN)62+-catalyzed oxidation of benzyl alcohol yields benzaldehyde almost exclusively (>95%), whereas the uncatalyzed reaction generates a 1:1 mixture of benzaldehyde and benzoic acid. Similarly, aliphatic alcohols are oxidized to aldehydes/ketones, cyclobutanol to cyclobutanone, and diethyl ether to a 1:1 mixture of ethanol and acetaldehyde. The kinetics of oxidation of alcohols and diethyl ether are first-order in [Fe(CH3CN)62+] and [O3] and independent of [substrate] at concentrations greater than ~5 mM. In this regime, the rate constant for all of the alcohols is approximately the same, kcat = (8 ± 1) × 104 M-1 s-1, and that for (C2H5)2O is (5 ± 0.5) × 104 M-1 s-1. In the absence of substrate, Fe(CH3CN)62+ reacts with O3 with kFe = (9.3 ± 0.3) × 104 M-1 s-1. The similarity between the rate constants kFe and kcat strongly argues for Fe(CH3CN)62+/O3 reaction as rate-determining in catalytic oxidation. The active oxidant produced in Fe(CH3CN)62+/O3 reaction is suggested to be an Fe(IV) species in analogy with a related intermediate in aqueous solutions. As a result, this assignment is supported by the similarity in kinetic isotope effects and relative reactivities of the two species toward substrates.

Volume 1 covers the most important technological aspects of the use of molecular oxygen for catalytic oxidation reactions.Volume 2 addresses the safety issues associated with the use of oxygen in catalytic oxidation reactions.Contents Vol. 1: 1. Introduction. 2. Chemical-physical properties of molecular oxygen. 3. Oxygen production technologies. 4. Chemical fundamentals of oxidation reactions. 5. Reactor technologies for multiphase systems. 6. Liquid phase oxidations. 7. Gas phase selective oxidations. 8. Selective oxidation of paraffins. References. Index. Vol. 2: 9. Introduction to safety problems in the chemical industry. 10. Chemical aspects of combustion in the gaseous phase. 11. Homogeneous chemical explosions: autoignition or spontaneous ignition. 12. Deflagration or propagation of flame. 13. Conditions governing flame propagation capability. 14. Detonation in the gaseous phase. 15. Prevention of and protection against explosions. References. Index.

Advanced Oxidation Processes – Applications, Trends, and Prospects constitutes a comprehensive resource for civil, chemical, and environmental engineers researching in the field of water and wastewater treatment. The book covers the fundamentals, applications, and future work in Advanced Oxidation Processes (AOPs) as an attractive alternative and a complementary treatment option to conventional methods. This book also presents state-of-the-art research on AOPs and heterogeneous catalysis while covering recent progress and trends, including the application of AOPs at the laboratory, pilot, or industrial scale, the combination of AOPs with other technologies, hybrid processes, process intensification, reactor design, scale-up, and optimization. The book is divided into four sections: Introduction to Advanced Oxidation Processes, General Concepts of Heterogeneous Catalysis, Fenton and Ferrate in Wastewater Treatment, and Industrial Applications, Trends, and Prospects.

Advanced Oxidation Processes for Waste Water Treatment: Emerging Green Chemical Technology is a complete resource covering the fundamentals and applications of all Advanced Oxidation Processes (AOPs). This book presents the most up-to-date research on AOPs and makes the argument that AOPs offer an eco-friendly method of wastewater treatment. In addition to an overview of the fundamentals and applications, it details the reactive species involved, along with sections on reactor designs, thus helping readers understand and implement these methods. - Presents in-depth coverage of all types of Advanced Oxidation Processes, including Super Critical Water Oxidation, Photo-Fenton and Like Processes - Includes a fundamental review, applications, reactive species and reactor designs - Reviews applications across waste types, including industrial waste, domestic and municipal sewage, and hospital wastes

By some measure the most widely produced chemical in the world today, sulfuric acid has an extraordinary range of modern uses, including phosphate fertilizer production, explosives, glue, wood preservative and lead-acid batteries. An exceptionally corrosive and dangerous acid, production of sulfuric acid requires stringent adherence to environmental regulatory guidance within cost-efficient standards of production. This work provides an experience-based review of how sulfuric acid plants work, how they should be designed and how they should be operated for maximum sulfur capture and minimum environmental impact. Using a combination of practical experience and deep physical analysis, Davenport and King review sulfur manufacturing in the contemporary world where regulatory guidance is becoming ever tighter (and where new processes are being required to meet them), and where water consumption and energy considerations are being brought to bear on sulfuric acid plant operations. This 2e will examine in particular newly developed acid-making processes and new methods of minimizing unwanted sulfur emissions. The target readers are recently graduated science and engineering students who are entering the chemical industry and experienced professionals within chemical plant design companies, chemical plant production companies, sulfuric acid recycling companies and sulfuric acid users. They will use the book to design, control, optimize and operate sulfuric acid plants around the world. - Unique mathematical analysis of sulfuric acid manufacturing processes, providing a sound basis for optimizing sulfuric acid manufacturing processes - Analysis of recently developed sulfuric acid manufacturing techniques suggests advantages and disadvantages of the new processes from the energy and environmental points of view - Analysis of tail gas sulfur capture processes indicates the best way to combine sulfuric acid making and tailgas sulfur-capture processes from the energy and environmental points of view - Draws on industrial connections of the authors through years of hands-on experience in sulfuric acid manufacture

This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.