Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), Second Edition is a Cisco®-authorized, self-paced learning tool for CCNP Voice® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. This book focuses on Cisco Unified Communications Manager (CUCM) Release 8.x, the call routing and signaling component for the Cisco Unified Communications solution. The book has been fully updated and includes new coverage of topics such as Service Advertisement Framework (SAF), and Call Control Discovery (CCD). Whether you are preparing for CCNP Voice certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), Second Edition, is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen, CCVP, and CCNP, along with numerous other Cisco voice specializations, Microsoft, VMware, and Novell certifications, has been an independent IT and telephony consultant, author, and technical editor for more than 15 years. He has been a technical trainer for more than 19 years and has taught more than 60 different courses in Cisco, Microsoft, VMware, and Novell. For the last seven years he has specialized in Cisco, and recently Microsoft Unified Communications along with VMware virtualization and Cisco data center technologies. He has done a wide array of IT and telephony consulting for many different companies. · Identify multisite issues and deployment solutions · Implement multisite connections · Apply dial plans for multisite deployments · Examine remote site redundancy options · Implement Survivable Remote Site Telephony (SRST) and Media Gateway Control Protocol (MGCP) Fallback · Implement CUCM Express in SRST mode · Implement bandwidth management and call admission control (CAC) · Configure device and extension mobility · Apply Service Advertisement Framework (SAF) and Call Control Discovery (CCD) This volume is in the Foundation Learning Guide Series offered by Cisco Press®. These guides are developed together with Cisco as the only authorized, self-paced learning tools that help networking professionals build their understanding of networking concepts and prepare for Cisco certification exams.

Authorized Self-Study Guide Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Foundation learning for CIPT2 exam 642-456 Chris Olsen Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, implement solutions to reduce bandwidth requirements in the IP WAN, enable Call Admission Control (CAC) and automated alternate routing (AAR), and implement device mobility, extension mobility, Cisco Unified Mobility, and voice security. This book focuses on Cisco Unified CallManager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features, and voice security. Whether you are preparing for CCVP certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen is the president and founder of System Architects, Inc., a training and consulting firm specializing in Cisco, Microsoft, and Novell networking; IP telephony; and information technologies. Chris has been teaching and consulting in the networking arena for more than 15 years. He currently holds his CCNA®, CCDA®, CCNP®, and CCVP certifications, as well as various Microsoft certifications. Identify multisite issues and deployment solutions Implement multisite connections Apply dial plans for multisite deployments Examine remote site redundancy options Deploy Cisco Unified Communications Manager Expressin SRST mode Implement bandwidth management, call admission control (CAC), and call applications on Cisco IOS® gateways Configure device, extension mobility, and Cisco unified mobility Understand cryptographic fundamentals and PKI Implement security in Cisco Unified Communications Manager This volume is in the Certification Self-Study Series offered by Cisco Press®. Books in this series provide officially developed self-study solutions to help networking professionals understand technology implementations and prepare for the Cisco Career Certifications examinations. Category: Cisco Unified Communications Manager 6.0 Covers: CIPT2 Exam 642-456

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) teaches you how to implement a Cisco Unified Communications Manager solution in a multisite environment, apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. The book covers the 8.x release of Cisco Unified Communications Manager (CUCM). Topical coverage includes: implementing multisite deployments, centralized call processing redundancy, bandwidth management, call admission control, call control discovery, intercompany media exchange, and features and applications for multisite deployments. Each chapter ends with questions to help you assess your understanding of what you have read.

Authorized Self-Study Guide Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Foundation learning for CIPT2 exam 642-456 Chris Olsen Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, implement solutions to reduce bandwidth requirements in the IP WAN, enable Call Admission Control (CAC) and automated alternate routing (AAR), and implement device mobility, extension mobility, Cisco Unified Mobility, and voice security. This book focuses on Cisco Unified CallManager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features, and voice security. Whether you are preparing for CCVP certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen is the president and founder of System Architects, Inc., a training and consulting firm specializing in Cisco, Microsoft, and Novell networking; IP telephony; and information technologies. Chris has been teaching and consulting in the networking arena for more than 15 years. He currently holds his CCNA®, CCDA®, CCNP®, and CCVP certifications, as well as various Microsoft certifications. Identify multisite issues and deployment solutions Implement multisite connections Apply dial plans for multisite deployments Examine remote site redundancy options Deploy Cisco Unified Communications Manager Expressin SRST mode Implement bandwidth management, call admission control (CAC), and call applications on Cisco IOS® gateways Configure device, extension mobility, and Cisco unified mobility Understand cryptographic fundamentals and PKI Implement security in Cisco Unified Communications Manager This volume is in the Certification Self-Study Series offered by Cisco Press®. Books in this series provide officially developed self-study solutions to help networking professionals understand technology implementations and prepare for the Cisco Career Certifications examinations. Category: Cisco Unified Communications Manager 6.0 Covers: CIPT2 Exam 642-456

This is the eBook version of the printed book. If the print book includes a CD-ROM, this content is not included within the eBook version. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites du.

Now fully updated for Cisco’s new CIPTV2 300-075 exam, Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Foundation Learning Guide is your Cisco® authorized learning tool for CCNP® Collaboration preparation. Part of the Cisco Press Foundation Learning Series, it teaches advanced skills for implementing a Cisco Unified Collaboration solution in a multisite environment. The authors show how to implement Uniform Resource Identifier (URI) dialing, globalized call routing, Intercluster Lookup Service and Global Dial Plan Replication, Cisco Service Advertisement Framework and Call Control Discovery, tail-end hop-off, Cisco Unified Survivable Remote Site Telephony, Enhanced Location Call Admission Control (CAC) and Automated Alternate Routing (AAR), and important mobility features. They introduce each key challenge associated with Cisco Unified Communications (UC) multisite deployments, and present solutions-focused coverage of Cisco Video Communication Server (VCS) Control, the Cisco Expressway Series, and their interactions with Cisco Unified Communications Manager. Each chapter opens with a topic list that clearly identifies its focus, ends with a quick-study summary of key concepts, and presents review questions to assess and reinforce your understanding. The authors present best practices based on Cisco Solutions Reference Network Designs and Cisco Validated Designs, and illustrate operation and troubleshooting via configuration examples and sample verification outputs. This guide is ideal for all certification candidates who want to master all the topics covered on the CIPTV2 300-075 exam. Shows how to craft a multisite dial plan that scales, allocates bandwidth appropriately, and supports QoS Identifies common problems and proven solutions in multisite UC deployments Introduces best practice media architectures, including remote conferencing and centralized transcoding Thoroughly reviews PSTN and intersite connectivity options Shows how to provide remote site telephony and branch redundancy Covers bandwidth reservation at UC application level with CAC Explains how to plan and deploy Cisco Device Mobility, Extension Mobility, and Unified Mobility Walks through deployment of Cisco Video Communication Server and Expressway series, including user and endpoint provisioning Covers Cisco UCM and Cisco VCS interconnections Shows how to use Cisco UC Mobile and Remote Access Covers fallback methods for overcoming IP WAN failure Demonstrates NAT traversal for video and IM devices via VCS Expressway Introduces dynamic dial plan learning via GDPR, SAD, or CCD

Implementing Cisco Unified Communications Manager, Part 1 (CIPT1) Foundation Learning Guide Second Edition Josh Finke, CCIE® No. 25707 Dennis Hartmann, CCIE® No. 15651 Foundation Learning for the CCNP Voice CIPT1 642-447 exam Implementing Cisco Unified Communications Manager, Part 1 (CIPT1), Second Edition is a Cisco®-authorized, self-paced learning tool for CCNP Voice® foundation learning. This book provides the knowledge necessary to implement a Cisco Unified Communications Manager (CUCM) solution at a single-site environment. By reading this book, you will learn how to perform post-installation tasks, configure CUCM, implement Media Gateway Control Protocol (MGCP) and H.323 gateways, and build dial plans to place On-Net and Off-Net phone calls. You will also implement media resources, IP Phone Services, Cisco Unified Communications Manager native presence, and Cisco Unified Mobility. This book focuses primarily on CUCM version 8.x, which is the call routing and signaling component for the Cisco Unified Communications solution. This book has been fully updated with new coverage of CUCM phone services, Cisco Unified Manager Assistant, Cisco Unified Mobility, and H.323 gateways. Whether you are preparing for CCNP Voice certification or simply want to gain a better understanding of Cisco Unified Communications Manager fundamentals, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 1 (CIPT1), Second Edition, is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. n Understand Cisco Unified Communications Manager architecture and components n Evaluate CUCM deployment models n Set up and configure CUCM services n Implement and harden IP phones n Manage user accounts n Configure Catalyst® switches for power over Ethernet and voice VLAN requirements n Deploy MGCP and H.323 gateways n Configure call routing and digit manipulation n Set up calling privileges and call coverage n Deploy various media resources, features, and applications n Establish Presence-enabled speed dials and lists n Implement Cisco Unified Manager Assistant and Cisco Unified Mobile This volume is in the Foundation Learning Guide Series offered by Cisco Press®. These guides are developed together with Cisco as the only authorized, self-paced learning tools that help networking professionals build their understanding of networking concepts and prepare for Cisco certification exams.