Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.

Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior

Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.

This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

Dynamic Behavior of Materials: Fundamentals, Material Models, and Microstructure Effects provides readers with the essential knowledge and tools necessary to determine best practice design, modeling, simulation and application strategies for a variety of materials while also covering the fundamentals of how material properties and behavior are affected by material structure and high strain rates. The book examines the relationships between material microstructure and consequent mechanical properties, enabling the development of materials with improved performance and more effective design of parts and components for high-rate applications. Sections cover the fundamentals of dynamic material behavior, with chapters studying dynamic elasticity and wave propagation, dynamic plasticity of crystalline materials, ductile fracture, brittle fracture, adiabatic heating and strain localization, response to shock loading, various material characterization methods, such as the Hopkinson Bar Technique, the Taylor Impact Experiment, different shock loading experiments, recent advances in dynamic material behavior, the dynamic behaviors of nanocrystalline materials, bulk metallic glasses, additively manufactured materials, ceramics, concrete and concrete-reinforced materials, geomaterials, polymers, composites, and biomaterials, and much more. - Focuses on the relationship between material microstructure and resulting mechanical responses - Covers the fundamentals, characterization methods, modeling techniques, applications and recent advances of the dynamic behavior of a broad array of materials - Includes insights into manufacturing and processing techniques that enable more effective material design and application

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics, the first volume of six from the Conference, brings together 71 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Materials Science, including papers on Composite Materials, Dynamic Failure and Fracture, Dynamic Materials Response, Novel Testing Techniques, Low Impedance Materials, Metallic Materials, Response of Brittle Materials, Time Dependent Materials, High Strain Rate Testing of Biological and Soft Materials, Shock and High Pressure Response, Energetic Materials, Optical Techniques for Imaging High Strain Rate Material Response, and Modeling of Dynamic Response.

Dynamic Behavior of Materials, Volume 1 represents the first of nine volumes of technical papers presented at the Society for Experimental Mechanics SEM 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015. The full set of proceedings also includes volumes on: Challenges in Mechanics of Time Dependent Materials, Advancement of Optical Methods in Experimental Mechanics, Experimental and Applied Mechanics 16th International Symposium on MEMS and Nanotechnology, 5th International Symposium on the Mechanics of Biological Systems and Materials, International Symposium on the Mechanics of Composite and Multi-functional Materials, Fracture, Fatigue, Failure and Damage Evolution; and Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems.

Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports