As cool as classic muscle cars might be, they're only as good as the automotive technology of their era. That's where this book comes in. With clear, easy-to-follow instructions, this guide shows how to give your car all the muscle of today while preserving the classic styling of your muscle car. In this updated and fully illustrated edition of his popular handbook, veteran overhauler and automotive writer Jason Scott takes readers through the step-by-step improvements that will add more power, style, and handling capability to any classic muscle car. Full-color photos accompany Scott's detailed instructions, covering bodywork and interior restoration, engine enhancements, transmission and axle swaps, suspension, steering, chassis and brake upgrades as well as many other changes that will restore-or maintain-a muscle cars identity while making it perform as if it were built only yesterday.

Although not the first V-8 engine ever produced, Henry Ford's side-valve V-8, launched in 1932, certainly qualified as the first mass-produced V-8 sold to the public. Because of Henry Ford's stubbornness, the first versions were less than ideal. The technology was in its infancy and cost-cutting measures limited the output and reliability of the early models. Over time, however, the "Flattie" became the go-to powerplant for a whole generation of new hobbyists who were called "hot rodders." The engine maintained its position in the hobby well into the 1950s, even when more modern overhead-valve designs started coming out of Detroit. It's hard to overstate the impact that this simple little engine had on a whole generation of enthusiasts. Even today, people choose a flathead for period-correct builds over far more powerful options. The style and sound of a modified flathead is an iconic part of American history. In Ford Flathead Engines: How to Rebuild & Modify, veteran author Tony Thacker and flathead guru of H&H Flatheads, Mike Herman, take you step-by-step through rebuilding a vintage flathead. One of the most important steps is to actually find a good, usable core; many have been sitting for a very long time and the engine design is prone to cracking. Running changes are also an important consideration when selecting a core, and include cooling system, ignition, and transmission mount. After you have selected a core, Thacker and Herman take you through the entire process of a rebuild, including teardown, parts inspection, machine shop processes, replacement part selection, re-assembly, start up, and break-in. Also covered is a unique performance build completed at the H&H shop for legendary race car team manager and all-around enthusiast Ray Evernham. It all adds up to more than 500 color photos and insider tips on building what could be called the most iconic engine ever built, the Ford flathead V-8.

This second edition is bigger and better with new color photography and updated information about new materials, parts sources and restoration techniques. This massive book includes over 1,300 photos that offer detailed step-by-step coverage of restoration processes. By thoroughly presenting the restoration of 12 of the most coveted muscle cars of all time, the authors cover virtually every aspect of restoration, from disassembly to first drive. Cars featured here include: 1968 Yenko Camaro; 1966 Pontiac GTO; 1969 Dodge Charger 500; 1963 1/2 Ford 427 Galaxie 500 Hatchback; 1973 Pontiac Super Duty Trans Am; 1966 L79 Chevy Nova SS; and a 1966 Dodge Coronet Hemi. 2nd Edition

Rebuild and modify your Ford inline six with help from the leading performance builders of these engines, Vintage Inlines! Covering Ford’s small 6-cylinder engine made famous in Falcons, Comets, Mustangs, and many other models from the 1960s and 1970s, this book has everything you need to know from step-by-step rebuilding instructions to performance parts that will set you apart from the rest of the crowd. If this is your first engine build, you’ll be glad to know that every aspect of a complete rebuild is here. Starting with engine removal, you’ll learn all the different steps, including examination, machine work, reassembly, and reinstallation. The mystery is revealed on setting ring gap, checking valve-to-piston clearance, and even degreasing the camshaft for spot-on valve timing! Whether it’s replacing the undersized and outdated 1-barrel carburetor or the original Load-O-Matic distributor, you’ll learn how to get the most from the engine that came as original equipment in literally millions of our favorite Ford vehicles. With the information in this book, you’ll learn how to add a 2-barrel carburetor, electronic ignition, and even a header so you can have the smooth rumble of dual exhaust. Congratulations on your decision to build and modify one of the most popular engines from some of the most popular cars in Ford’s long history with Ford Inline Six: How to Rebuild & Modify!

With information on major systems - suspension, steering, brakes, wheels, transmission, tires, engines, cooling, exhaust, fuel, ignition and electrical systems, rear axle and driveshaft, and upholstery - this title shows how those with a modicum of mechanical skill can do the maintenance and repairs necessary to keep their muscle car alive.

This is a complete guide to selecting, installing, and tuning forced-induction fuel/air systems. Everything involved with these systems will be covered, including assessing power goals, component selection, engine preparation, tools, installation procedures, tuning, vehicle modifications, driveability, and sources.

This resource explains how to rebuild and modify transmissions from both rear- and front-wheel-drive cars. It explains the principles behind the workings of all manual transmissions, and helps readers understand what they need to do and know to rebuild their own transmissions. Includes how to determine what parts to replace; how and why to replace certain seals, spacers, springs, forks, and other parts; and where to find (and how to measure) the specifications for each particular transmission.

Learn how to rebuild a small-block Chevy in your own garage with this full-color guide, written in layperson's terms.Chapters show you how to assess and choose an engine for rebuilding; how to tear it down and inspect it; and how to decide what needs to be done, whether you plan a basic restoration or a performance build. If you need specialized machine work, learn how to find a good machine shop, and what questions to ask the machinist. It also shows what the machine shop does, as it applies to what you must know to make the right decisions when dealing with a machine shop. It even includes information on how to get the best street performance on a reasonable budget, including what engine to start with, what parts to buy, and what combinations work best. Great tips show you where to spend your money to get the best deal.

As Ford’s follow-up to the famous flathead, the Y-block was Ford’s first overhead-valve V-8 and it established an impressive high-performance legacy, winning many races in NASCAR and setting records at the Bonneville Salt Flats. This venerable Ford engine, which powers classic Thunderbirds, Crown Victorias, Edsels, and other cars, is enjoying a performance renaissance. Many aftermarket parts, including heads, can turn a sedate Y-block into a powerhouse. The engine earned its name from its deep-skirt block design that looked like a “Y.” This stout engine was installed in millions of Ford cars from 1954 to 1962 and Ford trucks from 1952 to 1964. Author and Ford tech expert Charles Morris explains each critical aspect of rebuilding a stock 239-, 256-, 272-, 292-, and 312-ci Y-block and building a modified Y-block. He shows you how to identify components and conduct a thorough inspection so you select a sound block, heads, intake, and other components. He explains the specifics for obtaining high-quality machining work and verifying clearances. In addition, he delves into the intricacies of each step of the assembly process so you can rebuild a strong-running and reliable engine. Most important, Morris details the steps to effectively remedy the Y-block oiling problems. This is the book Ford Y-block owners and fans have been waiting for. It’s an indispensible guide for performing a professional-caliber rebuild and buildup of the Y-block.

The photos in this edition are black and white. Skylarks, GSXs, Grand Nationals, Rivieras, Gran Sports; the list of formidable performance Buicks is impressive. From the torque monsters of the 1960s to the high-flying Turbo models of the '80s, Buicks have a unique place in performance history. During the 1960s, when word of the mountains of torque supplied by the big-inch Buicks hit the street, nobody wanted to mess with them. Later, big-inch Buicks and the Hemi Chryslers went at it hammer and tongs in stock drag shootouts and in the pages of the popular musclecar magazines of the day. The wars between the Turbo Buicks and Mustang GTs in the 1980s were also legendary, as both cars responded so well to modifications. How to Build Max-Performance Buick Engines is the first performance engine book ever published on the Buick family of engines. This book covers everything from the Nailheads of the '50s and early '60s, to the later evolutions of the Buick V-8 through the '60s and '70s, through to the turbo V-6 models of the '70s and '80s. Veteran magazine writer and Buick owner Jefferson Bryant supplies the most up-to-date information on heads, blocks, cams, rotating assemblies, interchangeability, and oiling-system improvements and modifications, along with details on the best performance options available, avenues for aftermarket support, and so much more. Finally, the Buick camp gets the information they have been waiting for, and it's all right here in How to Build Max-Performance Buick Engines.