High-Frequency Characterization of Electronic Packaging will be of interest to researchers and designers of high-frequency electronic packaging. Understanding high-frequency behavior of packaging is of growing importance due to higher clock-speeds in computers and higher data transmission rates in broadband telecommunication systems. Basic knowledge of the high-frequency behavior of packaging and interconnects is, therefore, indispensable for the design of future telecommunication and computer systems. High-Frequency Characterization of Electronic Packaging gives the reader an insight into how high-frequency characterization of electronic packaging should be done and describes the problems that have to be tackled, especially in performing accurate measurements on modern IC-packages and in determination of circuit models. High-Frequency Characterization of Electronic Packaging is conceived as a comprehensive guide for the start of research and to help in performing high-frequency measurements. Important notions in high- frequency characterization such as S-parameters, calibration, probing, de-embedding and measurement-based modeling are explained. The described techniques are illustrated with several up-to-date examples.

Modeling, Analysis, Design and Testing for Electronics Packaging Beyond Moore provides an overview of electrical, thermal and thermomechanical modeling, analysis, design and testing for 2.5D/3D. The book addresses important topics, including electrically and thermally induced issues, such as EMI and thermal issues, which are crucial to package signal and thermal integrity. It also covers modeling methods to address thermomechanical stress related to the package structural integrity. In addition, practical design and test techniques for packages and systems are included. - Includes advanced modeling and analysis methods and techniques for state-of-the art electronics packaging - Features experimental characterization and qualifications for the analysis and verification of electronic packaging design - Provides multiphysics modeling and analysis techniques of electronic packaging

This second edition of An Engineer's Guide to Automated Testing of High-Speed Interfaces provides updates to reflect current state-of-the-art high-speed digital testing with automated test equipment technology (ATE). Featuring clear examples, this one-stop reference covers all critical aspects of automated testing, including an introduction to high-speed digital basics, a discussion of industry standards, ATE and bench instrumentation for digital applications, and test and measurement techniques for characterization and production environment. Engineers learn how to apply automated test equipment for testing high-speed digital I/O interfaces and gain a better understanding of PCI-Express 4, 100Gb Ethernet, and MIPI while exploring the correlation between phase noise and jitter. This updated resource provides expanded material on 28/32 Gbps NRZ testing and wireless testing that are becoming increasingly more pertinent for future applications. This book explores the current trend of merging high-speed digital testing within the fields of photonic and wireless testing.

There are continuous efforts focussed on improving road traffic safety worldwide. Numerous vehicle safety features have been invented and standardized over the past decades. Particularly interesting are the driver assistance systems, since these can considerably reduce the number of accidents by supporting drivers’ perception of their surroundings. Many driver assistance features rely on radar-based sensors. Nowadays the commercially available automotive front-end sensors are comprised of discrete components, thus making the radar modules highly-priced and suitable for integration only in premium class vehicles. Realization of low-cost radar fro- end circuits would enable their implementation in inexpensive economy cars, c- siderably contributing to traffic safety. Cost reduction requires high-level integration of the microwave front-end c- cuitry, specifically analog and digital circuit blocks co-located on a single chip. - cent developments of silicon-based technologies, e.g. CMOS and SiGe:C bipolar, make them suitable for realization of microwave sensors. Additionally, these te- nologies offer the necessary integration capability. However, the required output power and temperature stability, necessary for automotive radar sensor products, have not yet been achieved in standard digital CMOS technologies. On the other hand, SiGe bipolar technology offers excellent high-frequency characteristics and necessary output power for automotive applications, but has lower potential for - alization of digital blocks than CMOS.

This book addresses two main problems with interconnections at the chip and package level: crosstalk and simultaneous switching noise. Its orientation is towards giving general information rather than a compilation of practical cases. Each chapter contains a list of references for the topics.

Applies basic field behavior in circuit design and demonstrates how it relates to grounding and shielding requirements and techniques in circuit design This book connects the fundamentals of electromagnetic theory to the problems of interference in all types of electronic design. The text covers power distribution in facilities, mixing of analog and digital circuitry, circuit board layout at high clock rates, and meeting radiation and susceptibility standards. The author examines the grounding and shielding requirements and techniques in circuit design and applies basic physics to circuit behavior. The sixth edition of this book has been updated with new material added throughout the chapters where appropriate. The presentation of the book has also been rearranged in order to reflect the current trends in the field. Grounding and Shielding: Circuits and Interference, Sixth Edition: Includes new material on vias and field control, capacitors as transmission lines, first energy sources, and high speed designs using boards with only two layers Demonstrates how circuit geometry controls performance from dc to gigahertz Examines the use of multi-shielded transformers in clean-power installations Provides effective techniques for handling noise problems in analog and digital circuits Discusses how to use conductor geometry to improve performance, limit radiation, and reduce susceptibility to all types of hardware and systems Grounding and Shielding: Circuits and Interference, Sixth Edition is an updated guide for circuit design engineers and technicians. It will also serve as a reference for engineers in the semiconductor device industry.

Through Silicon Via (TSV) is a key technology for realizing three-dimensional integrated circuits (3D ICs) for future high-performance and low-power systems with small form factors. This book covers both qualitative and quantitative approaches to give insights of modeling TSV in a various viewpoints such as signal integrity, power integrity and thermal integrity. Most of the analysis in this book includes simulations, numerical modelings and measurements for verification. The author and co-authors in each chapter have studied deep into TSV for many years and the accumulated technical know-hows and tips for related subjects are comprehensively covered.

With the inclusion of the two new hot topics in signal integrity, power integrity and high speed serial links, this book will be the most up to date complete guide to understanding and designing for signal integrity.

Circuits are faster and more tightly packed than ever, wireless technologies increase the electromagnetic (EM) noise environment, new materials entail entirely new immunity issues, and new standards govern the field of electromagnetic compatibility (EMC). Maintaining the practical and comprehensive approach of its predecessor, Principles and Techniques of Electromagnetic Compatibility, Second Edition reflects these emerging challenges and new technologies introduced throughout the decade since the first edition appeared. What's new in the Second Edition? Characterization and testing for high-speed design of clock frequencies up to and above 6 GHz Updates to the regulatory framework governing EM compliance Additional coverage of the printed circuit board (PCB) environment as well as additional numerical tools An entirely new section devoted to new applications, including signal integrity, wireless and broadband technologies, EMC safety, and statistical EMC Added coverage of new materials such as nanomaterials, band gap devices, and composites Along with new and updated content, this edition also includes additional worked examples that demonstrate how estimates can guide the early stages of design. The focus remains on building a sound foundation on the fundamental concepts and linking this to practical applications, rather than supplying application-specific fixes that do not easily generalize to other areas.

This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration.