The guidelines focus on manual wheelchairs and the needs of long-term wheelchair users. The recommendations are targeted at those involved in wheelchair services, ranging from design and planning, to providing or supplying wheelchairs and their maintenance.

These Wheelchair provision guidelines aim to support improved accessto appropriate wheelchairs, for all those in need, including children, older persons, people with mobility disabilities, and those with chronic health conditions. They are relevant for all countries and apply to all wheelchair users and types of wheelchairs. They emphasize that the best outcomes in wheelchair access occur when wheelchair users have the benefit of an individual process of assessment, fitting, training and follow up, provided by trained personnel. Their purpose is to ensure that wheelchair users have timely access through wheelchair services that are people-centred and responsive to their needs. Target audiences are those with a role in planning, delivery, monitoring and evaluation of wheelchair provision. This includes policy-makers, wheelchair service personnel, and wheelchair user representative organizations.

This book provides a wide spectrum of readers with comprehensive but easily understandable protocols for the assessment and training of wheelchair skills. The Wheelchair Research Team at Dalhousie University and the Capital District Health Authority in Halifax (lead by the author) have focused on wheelchair safety and performance for three decades, as exemplified through the Wheelchair Skills Program. This is considered the top such program in the world. This new book is largely based on this program which has been accessed and utilized by over 75,000 people in 177 countries since 2007.

The U.S. Census Bureau has reported that 56.7 million Americans had some type of disability in 2010, which represents 18.7 percent of the civilian noninstitutionalized population included in the 2010 Survey of Income and Program Participation. The U.S. Social Security Administration (SSA) provides disability benefits through the Social Security Disability Insurance (SSDI) program and the Supplemental Security Income (SSI) program. As of December 2015, approximately 11 million individuals were SSDI beneficiaries, and about 8 million were SSI beneficiaries. SSA currently considers assistive devices in the nonmedical and medical areas of its program guidelines. During determinations of substantial gainful activity and income eligibility for SSI benefits, the reasonable cost of items, devices, or services applicants need to enable them to work with their impairment is subtracted from eligible earnings, even if those items or services are used for activities of daily living in addition to work. In addition, SSA considers assistive devices in its medical disability determination process and assessment of work capacity. The Promise of Assistive Technology to Enhance Activity and Work Participation provides an analysis of selected assistive products and technologies, including wheeled and seated mobility devices, upper-extremity prostheses, and products and technologies selected by the committee that pertain to hearing and to communication and speech in adults.

Volume numbers determined from Scope of the guidelines, p. 12-13.

Master the assistive strategies you need to make confident clinical decisions and help improve the quality of life for people with disabilities. Based on the Human Activity Assistive Technology (HAAT) model developed by Al Cook, Sue Hussey and Jan Polgar, Assistive Technologies: Principles & Practice, 5th Edition, provides detailed coverage of the broad range of devices, services, and practices that comprise assistive technology. This new text offers a systematic process for ensuring the effective application of assistive technologies — and focuses on the relationship between the human user and the assisted activity within specific contexts. It features over 30 new photos and illustrations, as well as, updated chapters and case studies that reflect current technology. Human Activity Assistive Technology (HAAT) framework locates assistive technology within common, everyday contexts for more relevant application. Focus on clinical application guides application of concepts to real-world situations. Study questions and chapter summaries in each chapter help assessment of understanding and identification of areas where more study is needed. Coverage of changing AT needs throughout the lifespan emphasizes how AT fits into people’s lives and contributes to their full participation in society. Principles and practice of assistive technology provide the foundation for effective reasoning. Ethical issues content provides vital information to guide AT service delivery. Explicit applications of the HAAT model in each of the chapters on specific technologies and more emphasis on the interactions among the elements make content even easier to understand. New! Thoroughly updated chapters to reflect current technology and practice. New! Expanded discussion on assistive robotics and smart technologies. New! Review of global initiatives on Assistive Technology. New! Updated art program with 30+ new photos and illustrations. New! Updated case studies to reflect changes in technology and practice since last edition.

Biomechatronics is rapidly becoming one of the most influential and innovative research directions defining the 21st century. The second edition Biomechatronics provides a complete and up-to-date account of this advanced subject at the university textbook level. This new edition introduces two new chapters – Animals Biomechatronics and Plants Biomechatronics – highlighting the importance of the rapidly growing world population and associated challenges with food production. Each chapter is co-authored by top experts led by Professor Marko B. Popovic, researcher and educator at the forefront of advancements in this fascinating field. Starting with an introduction to the historical background of Biomechatronics, this book covers recent breakthroughs in artificial organs and tissues, prosthetic limbs, neural interfaces, orthotic systems, wearable systems for physical augmentation, physical therapy and rehabilitation, robotic surgery, natural and synthetic actuators, sensors, and control systems. A number of practice prompts and solutions are provided at the end of the book. The second edition of Biomechatronics is a result of dedicated work of a team of more than 30 contributors from all across the globe including top researchers and educators in the United States (Popovic, Lamkin-Kennard, Herr, Sinyukov, Troy, Goodworth, Johnson, Kaipa, Onal, Bowers, Djuric, Fischer, Ji, Jovanovic, Luo, Padir, Tetreault), Japan (Tashiro, Iraminda, Ohta, Terasawa), Sweden (Boyraz), Turkey (Arslan, Karabulut, Ortes), Germany (Beckerle and Wiliwacher), New Zealand (Liarokapis), Switzerland (Dobrev), and Serbia (Lazarevic). - The only biomechatronics textbook written, especially for students at a university level - Ideal for students and researchers in the biomechatronics, biomechanics, robotics, and biomedical engineering fields - Provides updated overview of state-of-the-art science and technology of modern day biomechatronics, introduced by the leading experts in this fascinating field - This edition introduces two new chapters: Animals Biomechatronics and Plants Biomechatronics - Expanded coverage of topics such as Prosthetic Limbs, Powered Orthotics, Direct Neural Interface, Bio-inspired Robotics, Robotic Surgery, Actuators, Control and Physical Intelligence

Gun violence intentional, self-directed or accidental is a profoundly traumatic experience. From physical injuries to unseen psychological scars and permanent impairments, it irrevocably changes people's lives. Gun violence does not just the individual shot or threatened. Secondary victimisation also includes relatives, friends, colleagues, caregivers, and, perhaps controversially, perpetrators themselves. Gun Violence, Disability and Recovery provides the first overview of the rights and needs of survivors of gun violence. The collection contains contributions from gun violence survivors, trauma surgeons, disability rights activists, rehabilitation specialists, violence prevention and reduction experts, development practitioners, and gender justice advocates. From countries with low resource levels to those already equipped with state-of-the-art rehabilitation centres, this innovative publication provides policymakers, practitioners, government officials, and donors with timely analysis on what could be done differently to meet the needs and rights of survivors of gun violence. "This volume speaks to me both as a government official and as a survivor of gun violence. I know first-hand how painful the aftermath of such a life-changing event can be. But I also know it is possible to recover and make a positive difference in society. I hope this book will inspire other survivors to follow this path." Lenín Moreno Garcés, Vice President, Ecuador "Little attention has been paid to the fact that for every person killed by gun violence, as many as six victims will survive, often with severe disabilities. The long-term physical and psychological damage, social and economic impacts, can no longer be overlooked. Bringing together voices of survivors, as well as health, medical, rehabilitation and legal concerns, this book represents a significant step forward, outlining key issues for policy, practice and intervention. It is a must read for anyone concerned about human rights and violence and that should mean all of us." Nora Ellen Groce, Director, Leonard Cheshire Disability & Inclusive Development Centre, University College London, UK "Every year, hundreds of thousands of victims of gun violence, together with their families, experience the real costs of the availability and misuse of arms in our communities. For these victims to attain their basic human rights, so often denied them, we need a better understanding of their predicament, challenges and needs. Gun Violence, Disability and Recovery, with its comprehensive overview and analysis, will critically inform our efforts to develop and implement better policies and practices to enhance the realisation of the rights of survivors of armed violence, including implementation of the Arms Trade Treaty." Espen Barth Eide, former Minister of Foreign Affairs, Norway "The reality of survivors of gun violence my reality is so often lost in narrow political and economic interests. This volume gives me hope that attention to life after gun violence will begin to receive long overdue attention, and contribute to the long haul effort of improving services for survivors as well as working towards accountability about the arms trade." Shelley Barry, filmmaker, South Africa "International development goals, including the Millennium Development Goals, will not be achieved if the rights of people with disabilities are not met. Through a broad range of case studies and examples from low and middle income countries, this book shows us how States could do better. Let us hope that its message is heard. As a survivor of gun violence myself, I take a keen interest in any effort to effect gun control, particularly across Africa. This is the

This comprehensive ground-breaking southern African-centred collection spans the breadth of disability research and practice. Reputable and emerging scholars, together with disability advocates adopt a critical and interdisciplinary stance to prove, challenge and shift commonly held social understanding of disability in traditional discourses, frontiers and practices in prominent areas such as inter/national development, disability studies, education, culture, health, religion, gender, sports, tourism, ICT, theatre, media , housing and legislation. This handbook provides a body of interdisciplinary analyses suitable for the development of disability studies in southern Africa. Through drawing upon and introducing resources from several disciplines, theoretical perspectives and personal narratives from disability activists, it reflects on disability and sustainable development in southern Africa. It also addresses a clear need to bring together interdisciplinary perspectives and narratives on disability and sustainable development in ways that do not undermine disability politics advanced by disabled people across the world. The handbook further acknowledges and builds upon the huge body of literature that understands the social, cultural, educational, psychological, economic, historical and political facets of the exclusion of disabled people. The handbook covers the following broad themes: • Disability inclusion, ICT and sustainable development • Access to education, from early childhood development up to higher education • Disability, employment, entrepreneurship and community-based rehabilitation • Religion, gender and parenthood • Tourism, sports and accessibility • Compelling narratives from disability activists on societal attitudes toward disability, media advocacy, accessible housing and social exclusion. Thus, this much-awaited handbook provides students, academics, practitioners, development partners, policy makers and activists with an authoritative framework for critical thinking and debates that inform policy and practice in incomparable ways, with the view to promoting inclusive and sustainable development.

This book provides readers with a timely snapshot of ergonomics research and methods applied to design, development, prototyping, as well as evaluation, training and manufacturing of products, systems and services. It includes theoretical contributions, case studies, and reports on technical interventions. The book covers a wide range of topics in ergonomic design, such as ecological design, educational and game design, cultural and ethical aspects in design, user research and human-computer-interaction in design, as well as design for accessibility and extreme environments, and many others. The book gives special emphasis to new technologies such as virtual reality, state-of-the-art methodologies in information design, and human-computer interfaces. Based on the AHFE 2016 International Conference on Ergonomics in Design, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, this book represents a timely guide for both researcher and design practitioners, including industrial designers, human-computer interaction and user experience researchers, production engineers and applied psychologists.