The European Standard EN 9100 is the industry-specific norm of the aerospace and defence industry. For cooperation with an aerospace company, certification according to this standard is usually mandatory for suppliers. This book provides support in understanding and implementing the standard or when switching from ISO 9001:2015 to EN 9100:2018. After an introduction to the ISO 9001, the emphasis is placed on the core characteristics of EN 9100 and EN 9120. The book focuses primarily on the explanation and translation of the standards' text into the language of everyday business. The structure of the book strictly follows that of EN 9100:2018. Numerous practical examples facilitate the understanding and implementation in your own company. Where appropriate, special characteristics of the distributor standard EN 9120 are also discussed. Finally, the author describes the certification process in great detail. This includes the preparation, the selection of a certification auditor and a certification body as well as the execution of the audit including process measurements, the handling of nonconformities and the issuing of the certificate. Due to the high degree of congruence between the standards of the EN 9100 series, this book is also suitable as a guideline for the EN 9110 for maintenance organisations and the EN 9120 for distributors. The target group This textbook is aimed at employees working in the quality department of suppliers in the aerospace industry.

This book outlines the structure and activities of companies in the European aviation industry. The focus is on the design, production and maintenance of components, assemblies, engines and the aircraft itself. In contrast to other industries, the technical aviation industry is subject to many specifics, since its activities are highly regulated by the European Aviation Safety Agency (EASA), the National Aviation Authorities and by the aviation industry standard EN 9100. These regulations can influence the companies’ organization, personnel qualification, quality management systems, as well as the provision of products and services. This book gives the reader a deeper, up-to-date insight into today's quality and safety requirements for the modern aviation industry. Aviation-specific interfaces and procedures are looked at from both the aviation legislation standpoint as well as from a practical operational perspective.

The European Standard EN 9100 is the industry-specific norm of the aerospace and defence industry. For cooperation with an aerospace company, certification according to this standard is usually mandatory for suppliers. This book provides support in understanding and implementing the standard or when switching from ISO 9001:2015 to EN 9100:2018. After an introduction to the ISO 9001, the emphasis is placed on the core characteristics of EN 9100 and EN 9120. The book focuses primarily on the explanation and translation of the standards' text into the language of everyday business. The structure of the book strictly follows that of EN 9100:2018. Numerous practical examples facilitate the understanding and implementation in your own company. Where appropriate, special characteristics of the distributor standard EN 9120 are also discussed. Finally, the author describes the certification process in great detail. This includes the preparation, the selection of a certification auditor and a certification body as well as the execution of the audit including process measurements, the handling of nonconformities and the issuing of the certificate. Due to the high degree of congruence between the standards of the EN 9100 series, this book is also suitable as a guideline for the EN 9110 for maintenance organisations and the EN 9120 for distributors. The target group This textbook is aimed at employees working in the quality department of suppliers in the aerospace industry.

Martin Hinsch summarizes all chapters of the ISO 9001:2015 shortly. The text offers both beginners and users with little knowledge of the standard an introduction to or a refresher course on the world's most important standard for management systems. Therefore, each individual chapter of the standard is described. The text is primarily aimed at those QM enthusiasts who would like to gain a basic understanding of the standard briefly, concisely and precisely about all the requirements relevant for day-to-day operations. About the Author: Prof. Dr. Martin Hinsch is an expert in aeronautical quality and process management. He is approved as an auditor for ISO 9001:2015 and for the aviation standard EN 9100. With his management consultancy he supports companies in setting up QM systems.

This book guides readers through the broad field of generic and industry-specific management system standards, as well as through the arsenal of tools that are needed to effectively implement them. It covers a wide spectrum, from the classic standard ISO 9001 for quality management to standards for environmental safety, information security, energy efficiency, business continuity, laboratory management, etc. A dedicated chapter addresses international management standards for compliance, anti-bribery and social responsibility management. In turn, a major portion of the book focuses on relevant tools that students and practitioners need to be familiar with: 8D reports, acceptance sampling, failure tree analysis, FMEA, control charts, correlation analysis, designing experiments, estimating parameters and confidence intervals, event tree analysis, HAZOP, Ishikawa diagrams, Monte Carlo simulation, regression analysis, reliability theory, data sampling and surveys, testing hypotheses, and much more. An overview of the necessary mathematical concepts is also provided to help readers understand the technicalities of the tools discussed. A down-to-earth yet thorough approach is employed throughout the book to help practitioners and management students alike easily grasp the various topics.

This book presents the proceedings from the International Symposium for Production Research 2020. The cross-disciplinary papers presented draw on research from academics and practitioners from industrial engineering, management engineering, operational research, and production/operational management. It explores topics including: · computer-aided manufacturing; Industry 4.0 applications; simulation and modeling big data and analytics; flexible manufacturing systems; decision analysis quality management industrial robotics in production systems information technologies in production management; and optimization techniques. Presenting real-life applications, case studies, and mathematical models, this book is of interest to researchers, academics, and practitioners in the field of production and operation engineering.

Turn to the collective wisdom of the field's top experts to understand and solve even the most complex supply management issue For more than three decades, The Supply Management Handbook (formerly The Purchasing Handbook) has been vital for purchasing and supply professionals in every field and industry. This latest edition comprehensively updates and revises this classic to encompass the ongoing shift from simple purchasing to a new, more technology-based imperative--identifying and managing supply chain sources and strategies. Addressing every essential issue from outsourcing to total cost of ownership to negotiations and contract management, an international team of supply management experts offers the authoritative, practical coverage you need to survive and thrive in today's ever-changing supply management environment. Topics include: What key organizations are doing now to develop and implement next-generation supply methodologies An organization's duty to and interaction with society, and insights for addressing the evolving concept of social responsibility in the supply arena A five-step best practices framework for implementing total cost of ownership in supply management Logistics considerations for the supply management professional Supply management in a risk-sensitive environment Sharpening your supply management skills Dramatic social and technological changes have brought new roles, responsibilities, and challenges to supply managers - along with exciting new opportunities. This definitive reference is the most trusted and efficient way to prosper in this ever-changing field.