Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming. The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT. The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

Getting Started for Internet of Things with Launch Pad and ESP8266 provides a platform to get started with the Ti launch pad and IoT modules for Internet of Things applications. The book provides the basic knowledge of Ti launch Pad and ESP8266 based customized modules with their interfacing, along with the programming.The book discusses the application of Internet of Things in different areas. Several examples for rapid prototyping are included, this to make the readers understand the concept of IoT.The book comprises of twenty-seven chapters, which are divided into four sections and which focus on the design of various independent prototypes. Section-A gives a brief introduction to Ti launch pad (MSP430) and Internet of Things platforms like GPRS, NodeMCU and NuttyFi (ESP8266 customized board), and it shows steps to program these boards. Examples on how to interface these boards with display units, analog sensors, digital sensors and actuators are also included, this to make reader comfortable with the platforms. Section-B discusses the communication modes to relay the data like serial out, PWM and I2C. Section-C explores the IoT data loggers and shows certain steps to design and interact with the servers. Section-D includes few IoT based case studies in various fields. This book is based on the practical experience of the authors while undergoing projects with students and partners from various industries.

Unleash the power of the ESP8266 and build a complete home automation system with it. About This Book Harness the power of the ESP8266 Wi-Fi chip to build an effective Home Automation System Learn about the various ESP8266 modules Configuring the ESP8266 and making interesting home automation projects A step-by-step guide on the ESP8266 chip and how to convert your home into a smart home. Who This Book Is For This book is targeted at people who want to build connected and inexpensive home automation projects using the ESP8266 Wi-Fi chip, and to completely automate their homes. A basic understanding of the board would be an added advantage What You Will Learn Get, compile, install, and configure an MQTT server Use the Wi-Fi connectivity feature to control appliances remotely Control several home appliances using the ESP8266 Wi-Fi chip Control and monitor your home from the cloud using ESP8266 modules Stream real-time data from the ESP8266 to a server over WebSockets Create an Android mobile application for your project In Detail The ESP8266 is a low-cost yet powerful Wi-Fi chip that is becoming more popular at an alarming rate, and people have adopted it to create interesting projects. With this book, you will learn to create and program home automation projects using the ESP8266 Wi-Fi chip. You will learn how to build a thermostat to measure and adjust the temperature accordingly and how to build a security system using the ESP8266. Furthermore, you will design a complete home automation system from sensor to your own cloud. You will touch base on data monitoring, controlling appliances, and security aspects. By the end of the book, you will understand how to completely control and monitor your home from the cloud and from a mobile application. You will be familiar with the capabilities of the ESP8266 and will have successfully designed a complete ready-to-sell home automated system. Style and approach A practical book that will cover independent home automation projects.

This book provides a platform to understand Internet of things with Raspberry Pi and the basic knowledge of the programming and interfacing of the devices and designed systems. It broadly covers introduction to Internet of Things and enabling technologies, interfacing with Raspberry Pi and Arduino and interfacing with Raspberry Pi GPIO. Internet of Things with Raspberry pi and Arduino is aimed at senior undergraduate, graduate students and professionals in electrical engineering, computer engineering including robotics.

Create and program Internet of Things projects using the Espressif ESP32. Key FeaturesGetting to know the all new powerful EPS32 boards and build interesting Internet of Things projectsConfigure your ESP32 to the cloud technologies and explore the networkable modules that will be utilised in your IoT projectsA step-by-step guide that teaches you the basic to advanced IoT concepts with ESP32 Book Description ESP32 is a low-cost MCU with integrated Wi-Fi and BLE. Various modules and development boards-based on ESP32 are available for building IoT applications easily. Wi-Fi and BLE are a common network stack in the Internet of Things application. These network modules can leverage your business and projects needs for cost-effective benefits. This book will serve as a fundamental guide for developing an ESP32 program. We will start with GPIO programming involving some sensor devices. Then we will study ESP32 development by building a number of IoT projects, such as weather stations, sensor loggers, smart homes, Wi-Fi cams and Wi-Fi wardriving. Lastly, we will enable ESP32 boards to execute interactions with mobile applications and cloud servers such as AWS. By the end of this book, you will be up and running with various IoT project-based ESP32 chip. What you will learnUnderstand how to build a sensor monitoring loggerCreate a weather station to sense temperature and humidity using ESP32Build your own W-iFi wardriving with ESP32. Use BLE to make interactions between ESP32 and AndroidUnderstand how to create connections to interact between ESP32 and mobile applicationsLearn how to interact between ESP32 boards and cloud serversBuild an IoT Application-based ESP32 boardWho this book is for This book is for those who want to build a powerful and inexpensive IoT projects using the ESP32.Also for those who are new to IoT, or those who already have experience with other platforms such as Arduino, ESP8266, and Raspberry Pi.

This book provides a careful explanation of the basic areas of electronics and computer architecture, along with lots of examples, to demonstrate the interface, sensor design, programming and microcontroller peripheral setup necessary for embedded systems development. With no need for mechanical knowledge of robots, the book starts by demonstrating how to modify a simple radio-controlled car to create a basic robot. The fundamental electronics of the MSP430 are described, along with programming details in both C and assembly language, and full explanations of ports, timing, and data acquisition. Further chapters cover inexpensive ways to perform circuit simulation and prototyping. Key features include: - Thorough treatment of the MSP430's architecture and functionality along with detailed application-specific guidance - Programming and the use of sensor technology to build an embedded system - A learn-by-doing experience With this book you will learn: - The basic theory for electronics design - Analog circuits - Digital logic - Computer arithmetic - Microcontroller programming - How to design and build a working robot - Assembly language and C programming - How to develop your own high-performance embedded systems application using an on-going robotics application - Teaches how to develop your own high-performance embedded systems application using an on-going robotics application - Thorough treatment of the MSP430's architecture and functionality along with detailed application-specific guidance - Focuses on electronics, programming and the use of sensor technology to build an embedded system - Covers assembly language and C programming

Discover the powerful ESP8266 and ESP32 microcontrollers and their Wi-Fi communication. The ESP32 microcontroller features Bluetooth and BLE communication in addition to Wi-Fi. The book emphasizes practical projects and readers are guided through Wi-Fi and Bluetooth communication, mobile app design and build, ESP-NOW and LoRa communication, and signal generation. Projects throughout the book utilize the Wi-Fi functionality and processing power of the ESP microcontrollers. Projects are built in the Arduino IDE, so you don't need to download other programming software. Mobile apps are now ubiquitous, making the app build projects of the book very relevant, as are the web page design projects. In Electronics Projects with the ESP8266 and ESP32, you'll see how easy and practical it is to access information over the internet, develop web pages, build mobile apps to remotely control devices with speech recognition or incorporate Google Maps in a GPS route tracking app. You will · Build practical electronics projects with an ESP8266 or ESP32 microcontroller with Wi-Fi communication · Use the Wi-Fi function of the ESP8266 and ESP32 to update web pages · Communicate with your mobile phone or smart watch by Bluetooth Low Energy · Transmit and receive information to control remote devices over the internet · Understand the design and build of mobile apps for internet based applications · Apply your computer programming skills in C++, JavaScript, AJAX and JSON · Use WebSocket, MQTT brokers and IFTTT for fast two-way communication with webpages Who This Book Is For The target audience is for Makers and Tinkerers who want to build internet/intranet based applications with more powerful microcontrollers, such as the ESP8266 or ESP32. A level of C++ programming expertise with the Arduino IDE is assumed, although all sketches are fully described and comprehensively commented.

Arduino is an open-source electronics platform based on easy-to-use hardware and software while LabVIEW is a graphical programming telling how to connect functions and work with a variety of datatypes when constructing applications.This book will help beginners to get started with Arduino-based embedded systems including essential know-how of the programming and interfacing of the devices. Book includes programming and simulation of Arduino-based projects and interfacing with LabVIEW, based on practical case studies. The book comprises of total twenty five chapters with description, working model of LabVIEW and programming with Arduino IDE.

This book presents the proceedings of the 4th International Conference on Internet of Things and Connected Technologies (ICIoTCT), held on May 9–10, 2019, at Malaviya National Institute of Technology (MNIT), Jaipur, India. The Internet of Things (IoT) promises to usher in a revolutionary, fully interconnected “smart” world, with relationships between objects and their environment and objects and people becoming more tightly intertwined. The prospect of the Internet of Things as a ubiquitous array of devices bound to the Internet could fundamentally change how people think about what it means to be “online”. The ICIotCT 2019 conference provided a platform to discuss advances in Internet of Things (IoT) and connected technologies, such as various protocols and standards. It also offered participants the opportunity to interact with experts through keynote talks, paper presentations and discussions, and as such stimulated research. With the recent adoption of a variety of enabling wireless communication technologies, like RFID tags, BLE, ZigBee, embedded sensor and actuator nodes, and various protocols such as CoAP, MQTT and DNS, IoT has moved on from its infancy. Today smart sensors can collaborate directly with machines to automate decision-making or to control a task without human involvement. Further, smart technologies, including green electronics, green radios, fuzzy neural approaches, and intelligent signal processing techniques play an important role in the development of the wearable healthcare devices.