This book is concerned with the steady state hydraulics of natural gas and other compressible fluids being transported through pipelines. Our main approach is to determine the flow rate possible and compressor station horsepower required within the limitations of pipe strength, based on the pipe materials and grade. It addresses the scenarios where one or more compressors may be required depending on the gas flow rate and if discharge cooling is needed to limit the gas temperatures. The book is the result of over 38 years of the authors' experience on pipelines in North and South America while working for major energy companies such as ARCO, El Paso Energy, etc.

In your day-to-day planning, design, operation, and optimization of pipelines, wading through complex formulas and theories is not the way to get the job done. Gas Pipeline Hydraulics acts as a quick-reference guide to formulas, codes, and standards encountered in the gas industry. Based on the author's 30 years of experience in manufacturing and the oil and gas industry, the book presents a step-by-step introduction to the concepts in a practical approach illustrated by real-world examples, case studies, and a wealth of problems at the end of each chapter. Avoiding overly complex equations and theorems, Gas Pipeline Hydraulics demonstrates the calculation of pressure drop using various commonly accepted formulas. The author extends this discussion to determine total pressure required under various configurations, the necessity of pressure regulators and control valves, the comparative pros and cons of adding compressor stations versus pipe loops, mechanical strength of the pipeline, and thermal hydraulic analysis. He also introduces transient pressure analysis along with references for more in-depth study. The text concludes with the economic aspects of pipeline systems. Containing valuable appendices that provide conversions from USCS to SI units, tables of properties of natural gas, commonly used pipe sizes, and allowable internal and hydrotest pressures, this is the most easy-to-use, hands-on reference for gas pipelines available.

This book covers liquid pipeline hydraulics as it applies to transportation of liquids through pipelines in a single phase steady state environment. It will serve as a practical handbook for engineers, technicians and others involved in design and operation of pipelines transporting liquids. Currently, existing books on the subject are mathematically rigorous, theoretical and lack practical applications. Using this book, engineers can better understand and apply the principles of hydraulics to their daily work in the pipeline industry without resorting to complicated formulas and theorems. Numerous examples from the author’s real life experience are included to illustrate application of pipeline hydraulics.

Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual's three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified flow rate and pressure limitations, and calculating the locations and HP of compressor stations and pumping stations on long distance pipelines. - Case studies are based on the author's personal field experiences - Component to system level coverage - Save time and money designing pipe routes well - Design and verify piping systems before going to the field - Increase design accuracy and systems effectiveness

This comprehensive text/reference addresses all hydraulic aspects of pipeline design. Incorporates many real-life examples from the author's experience in the design and operation of pipelines. Topics covered include basic equations necessary to pipeline design, how to conduct a feasibility study and perform economic analysis, design considerations for pumps and valves, how to suppress cavitation, hydraulic transients, trapped air, and methods of numerical solution of governing equations (including applications to complex piping systems). Includes twenty-five tables for easy reference. Extensively illustrated.

The first of its kind, this modern, comprehensive text covers both analysis and design of piping systems. The authors begin with a review of basic hydraulic principles, with emphasis on their use in pumped pipelines, manifolds, and the analysis and design of large pipe networks. After the reader obtains an understanding of how these principles are implemented in computer solutions for steady state problems, the focus then turns to unsteady hydraulics. These are covered at three levels:

This book is concerned with the steady state hydraulics of natural gas and other compressible fluids being transported through pipelines. Our main approach is to determine the flow rate possible and compressor station horsepower required within the limitations of pipe strength, based on the pipe materials and grade. It addresses the scenarios where one or more compressors may be required depending on the gas flow rate and if discharge cooling is needed to limit the gas temperatures. The book is the result of over 38 years of the authors’ experience on pipelines in North and South America while working for major energy companies such as ARCO, El Paso Energy, etc.

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. - Back-of-the envelope calculations - Checklists for maintenance operations - Checklists for environmental compliance - Simulations, modeling tools and equipment design - Guide for pump and pumping station placement

This on-the-job resource is packed with all the formulas, calculations, and practical tips necessary to smoothly move gas or liquids through pipes, assess the feasibility of improving existing pipeline performance, or design new systems. Contents: Water Systems Piping * Fire Protection Piping Systems * Steam Systems Piping * Building Services Piping * Oil Systems Piping * Gas Systems Piping * Process Systems Piping * Cryogenic Systems Piping * Refrigeration Systems Piping * Hazardous Piping Systems * Slurry and Sludge Systems Piping * Wastewater and Stormwater Piping * Plumbing and Piping Systems * Ash Handling Piping Systems * Compressed Air Piping Systems * Compressed Gases and Vacuum Piping Systems * Fuel Gas Distribution Piping Systems

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA