Damage in wood is principally the result of fatigue. Fatigue is the process of progressive localised irreversible change in a material, and may culminate in cracks or complete fracture if conditions that initiated or propagated the process persist. Comprehensive understanding of fatigue and fracture in engineered wood components must be founded on a proper understanding of the damage processes. Although wood is the world's most widely used structural material, whether measured by volume consumed or value of finished construction, its behaviour is not well understood even by people who have spent their careers studying it. * What is known about failure processes comes almost entirely from empirical evidence collected for engineering purposes. * Hypotheses about behaviour of wood are based on macroscopic observation of specimens during and following tests. * With only limited resources and the need to obtain practical results quickly, the timber engineering research community has steered away from the scientific approach. * Forestry practices are changing and are known to influence characteristics of wood cells therefore there is a need to periodically reassess the mechanical properties of visually graded lumber the blackbox approach. Fatigue and Fracture of Wood examines the above issues from a scientific point of view by drawing on the authors' own research as well as previously published material. Unlike the empirical research, the book begins by examining growth of wood. It briefly examines its structure in relation to how trees grow, before assessing the fatigue and fracture of wood and discussing the scientific methods of modelling fatigue. * Covers from macro to micro behaviour of wood * Presents direct evidence of how wood fractures using Scanning Electron Microscopy * The first book to present a physically correct model for fracture in wood * Provides experimental proof of so-called memory in wood (i.e. dependence of fatigue behaviour on the loading sequence) * Givse practical illustrations of how theories and models can be applied in practice An essential resource for wood scientists/engineers, timber-engineering practitioners, and graduate students studying wood and solid mechanics.

Fracture, Fatigue, Failure and Damage Evolution, Volume 8 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: In-situ Techniques for Fracture & Fatigue General Topics in Fracture & Fatigue Fracture & Fatigue of Composites Damage, Fracture, Fatigue & Durability Interfacial Effects in Fracture & Fatigue Damage Detection in Fracture & Fatigue

Fracture, Fatigue, Failure and Damage Evolution, Volume 7 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of nine from the Conference, brings together contributions to this important area of research and engineering. Session organizers include: Jay Carroll, Shuman Xia, Allison Beese, Ryan Berke, Garrett Pataky, Samantha Daly, Kavan Hazeli, Antonios Kontsos, Omer Ozgur Capraz, Scott Grutzik, Onome Scott-Emaukpor The collection presents early findings and case studies on a wide range of areas, including: Mechanics of Energy & Energetic Materials Vibration Effects in Fracture & Fatigue Fracture & Fatigue of Additively Manufactured Materials In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior Fracture & Fatigue of Composites Integration & Validation of Models with Experiments Fracture & Fatigue in Extreme Environments Novel Experimental Methods for Fatigue and Fracture Fracture of Brittle & Ductile Materials Interfacial Fracture

In the last quarter century, delamination has come to mean more than just a failure in adhesion between layers of bonded composite plies that might affect their load-bearing capacity. Ever-increasing computer power has meant that we can now detect and analyze delamination between, for example, cell walls in solid wood. This fast-moving and critically important field of study is covered in a book that provides everyone from manufacturers to research scientists the state of the art in wood delamination studies. Divided into three sections, the book first details the general aspects of the subject, from basic information including terminology, to the theoretical basis for the evaluation of delamination. A settled terminology in this subject area is a first key goal of the book, as the terms which describe delamination in wood and wood-based composites are numerous and often confusing. The second section examines different and highly specialized methods for delamination detection such as confocal laser scanning microscopy, light microscopy, scanning electron microscopy and ultrasonics. Ways in which NDE (non-destructive evaluation) can be employed to detect and locate defects are also covered. The book’s final section focuses on the practical aspects of this defect in a wide range of wood products covering the spectrum from trees, logs, laminated panels and glued laminated timbers to parquet floors. Intended as a primary reference, this book covers everything from the microscopic, anatomical level of delamination within solid wood sections to an examination of the interface of wood and its surface coatings. It provides readers with the perspective of industry as well as laboratory and is thus a highly practical sourcebook for wood engineers working in manufacturing as well as a comprehensively referenced text for materials scientists wrestling with the theory underlying the subject.

Fracture, Fatigue, Failure and Damage Evolution, Volume 8 represents the eighth of nine volumes of technical papers presented at the Society for Experimental Mechanics (SEM) 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015. The full set of proceedings also includes volumes on: Dynamic Behavior of Materials, Challenges in Mechanics of Time Dependent Materials, Advancement of Optical Methods in Experimental Mechanics, Experimental and Applied Mechanics, 16th International Symposium on MEMS and Nanotechnology, International Symposium on the Mechanics of Composite and Multi-functional Materials, 5th International Symposium on the Mechanics of Biological Systems and Materials, International Symposium on the Mechanics of Composite and Multi-functional Materials; and Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems.

Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.

Fracture, Fatigue, Failure and Damage Evolution, Volume 5: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Mixed Mode Fracture I: Emphasis on Modeling Mixed Mode Fracture II: Emphasis on Experimental Measurements Full-Field Measurements of Fracture Microscale & Microstructural Effects on Mechanical Behavior I: Nanoscale Effects Microscale & Microstructural Effects on Mechanical Behavior II: MEMS Microscale & Microstructural Effects on Mechanical Behavior III: Microstructure Microscale & Microstructural Effects on Mechanical Behavior IV: Shape Memory Alloys Fracture & Fatigue of Composites Fracture & Fatigue for Engineering Applications Wave-Based Techniques in Fracture & Fatigue I Wave-Based Techniques in Fracture & Fatigue II: Acoustic Emissions

This book gathers the peer-reviewed papers presented at the 13th International Conference on Structural Analysis of Historical Constructions (SAHC), held in Kyoto, Japan, on September 12-15, 2023. It highlights the latest advances and innovations in the field of conservation and restoration of historical and heritage structures. The conference topics encompass history of construction and building technology, theory and practice of conservation, inspection methods, non-destructive techniques and laboratory testing, numerical modeling and structural analysis, management of heritage structures and conservation strategies, structural health monitoring, repair and strengthening strategies and techniques, vernacular constructions, seismic analysis and retrofit, vulnerability and risk analysis, resilience of historic areas to climate change and hazard events, durability, and sustainability. As such the book represents an invaluable, up-to-the-minute tool, providing an essential overview of conservation of historical constructions, and offers an important platform to engineers, architects, archeologists, and geophysicists. Chapter The Challenges of the Conservation of Earthen Sites in Seismic Areas, Chapter Performance Evaluation of Patch Repairs on Historic Concrete Structures (PEPS): Preliminary Results from Two English Case Studies are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.

Many modern engineering structures are composed of brittle heterogenous, or quasibrittle, materials. These include concrete, composites, tough ceramics, rocks, cold asphalt mixtures, and many brittle materials at the microscale. Understanding the failure behavior of these materials is of paramount importance for improving the resilience and sustainability of various engineering structures including civil infrastructure, aircraft, ships, military armors, and microelectronic devices. Designed for graduate and upper-level undergraduate university courses, this textbook provides a comprehensive treatment of quasibrittle fracture mechanics. It includes a concise but rigorous examination of linear elastic fracture mechanics, which is the foundation of all fracture mechanics. It also covers the fundamental concepts of nonlinear fracture mechanics, and introduces more advanced concepts such as triaxial stress state in the fracture process zone, nonlocal continuum models, and discrete computational models. Finally, the book features extensive discussion of the various practical applications of quasibrittle fracture mechanics across different structures and engineering disciplines, and throughout includes exercises and problems for students to test their understanding.