The 5.0-liter performance wave has propelled Ford's Windsor small block to the top of the performance heap. Ford Windsor Small-Block Performance is a comprehensive guide to the tips, tricks, and techniques of top Ford performance experts that will help Fords or Mustangs run harder and faster. Engine building techniques are included for street machines, drag racers, tow vehicles--for just about any Windsor-equipped Ford. Whether owners have a 289, 302/5.0L, or 351W/5.8L, Ford Windsor Small-Block Performance is the guide to performance success--on or off the strip.

This completely revised and updated edition of HP's bestselling book on how to build high performance 5.0/5.8L Ford small-block engines-the second most popular engine modified in the aftermarket-contains five new chapters on the latest technology for modifying the cylinder block, heads, camshafts, valvetrain, exhaust systems, and more.

If there is one thing Ford enthusiasts have learned over the years, deciphering which Ford parts work with which Ford engines is a far more difficult task than with many other engine families. Will Cleveland heads fit on my Windsor block? Can I build a stroker motor with factory parts? Can I gain compression by using older-model cylinder heads, and will it restrict flow? Is there a difference between Windsor 2-barrel and 4-barrel heads? These are just a few examples of common questions Ford fans have. These and many other questions are examined in this all-new update of a perennial best seller. Thoroughly researched and, unlike previous editions, now focused entirely on the small-block Windsor and Cleveland engine families, Ford Small Block Engine Parts Interchange includes critical information on Ford’s greatest small-block engines and goes into great detail on the highly desirable high-performance hardware produced throughout the 1960s, 1970s, and 1980s. By combining some of the best parts from various years, some great performance potential can be unlocked in ways Ford never offered to the general public. Following the advice in Ford Small-Block Engine Parts Interchange, these engine combinations can become reality. You will find valuable information on cranks, blocks, heads, cams, intakes, rods, pistons, and even accessories to guide you through your project. Author George Reid has once again done extensive research to accurately deliver a thorough and complete collection of Ford small-block information in this newly revised edition. Knowing what internal factory engine parts can be used across the wide range of production Ford power plants is invaluable to the hot rodder and swap meet/eBay shopper. Whether building a stroker Cleveland or a hopped-up Windsor, this book is an essential guide.

In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.

This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

If you have a small-block Ford, then you need this book! This detailed guide covers the step-by-step rebuilding process of the popular small-block Ford engine. Parts inspection, diagnosis, reconditioning, and assembly are outlined in simple text. Hundreds of photos, charts, and diagrams visually walk you through the entire rebuild. You’ll be able to completely disassemble your engine, recondition the block and cylinder heads, then reassemble and install the engine in your vehicle. There’s even a section on how to perform tune-ups to maximize performance and economy. Sections on parts interchanging will help you identify all parts and determine which ones can and can’t be swapped. This is truly a “hands-on” book. Don’t put off your project any longer. Start rebuilding your small-block Ford today!

This revved up volume addresses high-performance engines, such as the ones found in Mustangs and emphasizes a budget approach to building them. 300 photos.

Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

While many will be familiar with 1960 Ford racing programmes using the very compact pushrod Small Block V8, few know the facts behind the technology employed at Ford during this time. This book gives insight to the confident, logical approach of engineers working at Ford's Engine & Foundry Division. Engineers who made outstanding technical decisions, leading to many major motorsport events being won using larger capacity derivatives of the 1961 221ci Small Block V8 production engine, a power unit introduced by Ford mid-1961 for use in 1962 model year intermediate Fairlanes and Mercurys.

Includes critical information on Ford's greatest V-8 engines with great detail on the high-performance hardware produced throughout the '60s ,'70s and '80s, as well as information on cranks, blocks, heads, cams, intakes, rods, pistons, and more.