This Guide provides information on special topics that affect the fire safety performance of very tall buildings, their occupants and first responders during a fire. This Guide addresses these topics as part of the overall building design process using performance-based fire protection engineering concepts as described in the SFPE Engineering Guide to Performance Based Fire Protection. This Guide is not intended to be a recommended practice or a document that is suitable for adoption as a code. The Guide pertains to “super tall,” “very tall” and “tall” buildings. Throughout this Guide, all such buildings are called “very tall buildings.” These buildings are characterized by heights that impose fire protection challenges; they require special attention beyond the protection features typically provided by traditional fire protection methods. This Guide does not establish a definition of buildings that fall within the scope of this document.

Fire Safety Design for Tall Buildings provides structural engineers, architects, and students with a systematic introduction to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design and the basic principles of fire development and heat transfer. It also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as the Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.

Fire safety is a major concern in many industries, particularly as there have been significant increases in recent years in the quantities of hazardous materials in process, storage or transport. Plants are becoming larger and are often situated in or close to densely populated areas, and the hazards are continually highlighted with incidents such as the fires and explosions at the Piper Alpha oil and gas platform, and the Enschede firework factory. As a result, greater attention than ever before is now being given to the evaluation and control of these hazards. In a comprehensive treatment of the subject unavailable elsewhere, this book describes in detail the applications of hazard and risk analysis to fire safety, going on to develop and apply quantification methods. It also gives an explanation in quantitative terms of improvements in fire safety in association with the costs that are expended in their achievement. Furthermore, a quantitative approach is applied to major fire and explosion disasters to demonstrate crucial faults and events. Featuring: Full international coverage and a review of several major fires and explosion disasters. Presentation of the properties and science of fire including the latest research. Detailed coverage of the performance of fire safety measures. This is an essential book for practitioners in fire safety engineering, loss prevention professionals, technical personnel in insurance companies as well as academics involved in fire science and postgraduate students. This book is also a useful reference for fire safety officers, building designers, engineers in the process industries, safety practitioners and risk assessment consultants.

High-Rise Security and Fire Life Safety servers as an essential took for building architects, building owners and property managers, security and fire safety directors, security consultants, and contract security firms. * Provides the reader with complete coverage of high-rise security and safety issues * Includes comprehensive sample documentation, diagrams, photographs to aid in developing security and fire life safety programs * Serves as an essential tool for building owners and managers, security and fire safety directors, security consultants and contract security firms.

Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.

As the ever-changing skylines of cities all over the world show, tall buildings are an increasingly important solution to accommodating growth more sustainably in today’s urban areas. Whether it is residential, a workplace or mixed use, the tower is both a statement of intent and the defining image for the new global city. The Tall Buildings Reference Book addresses all the issues of building tall, from the procurement stage through the design and construction process to new technologies and the building’s contribution to the urban habitat. A case study section highlights the latest, the most innovative, the greenest and the most inspirational tall buildings being constructed today. A team of over fifty experts in all aspects of building tall have contributed to the making of the Tall Buildings Reference Book, creating an unparalleled source of information and inspiration for architects, engineers and developers.

Fire Safety Design for Tall Buildings provides structural engineers, architects, and students systematic introductions to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design, the basic principles of fire development and heat transfer This book also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.

This Guide provides information on special topics that affect the fire safety performance of very tall buildings, their occupants and first responders during a fire. This Guide addresses these topics as part of the overall building design process using performance-based fire protection engineering concepts as described in the SFPE Engineering Guide to Performance Based Fire Protection. This Guide is not intended to be a recommended practice or a document that is suitable for adoption as a code. The Guide pertains to "super tall," "very tall" and "tall" buildings. Throughout this Guide, all such buildings are called "very tall buildings." These buildings are characterized by heights that impose fire protection challenges; they require special attention beyond the protection features typically provided by traditional fire protection methods. This Guide does not establish a definition of buildings that fall within the scope of this document. .