Fault and Joint Development: In Brittle and Semi-Brittle Rock details the theoretical concepts about fault and joint development in rock when they behave as brittle or semi-brittle material. The title first covers the concepts and criteria of brittle failure, along with the limits of temperature and pressure below which rocks may behave in a brittle or semi-brittle manner. Next, the selection details the application of the concepts of brittle failure and elastic theory to the problems of faulting and jointing. The book will be of great use to undergraduate students of geology and its related degrees. The text will also serve professionals in geological disciplines as a reference.

Fault and Joint Development in Brittle and Semi-brittle Rock deals with theories of fault and joint development in rock when they behave as brittle or semi-brittle material. The book contains three chapters, the first of which deals with some of the concepts and criteria of brittle failure along with an attempt to define limits of temperature and pressure below which rocks may behave in a brittle or semi-brittle manner. The second and third chapters discuss the application of these concepts of brittle failure and elastic theory to the problems of faulting and jointing, respectively. It is emphasized that since this book deals with theoretical aspects of structural geology it is concerned with generalizations and approximations. It must be left to the reader to decide how closely these theories approximate to any particular field data. This book is primarily intended for senior undergraduates and postgraduates in geology interested in the interpretation of geological structures. It may also be of interest to some mining and civil engineers.

Scientific understanding of fluid flow in rock fractures--a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storage--has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.

Topics covered in this text include: geology and structural geology; mechanics; dynamics of jointed and faulted rock; physical modelling and testing; constitutive modelling; seismicity and tectonics; instrumentation; hydraulics; and applications.

Engineers wishing to build structures on or in rock use the discipline known as rock mechanics. This discipline emerged as a subject in its own right about thirty five years ago, and has developed rapidly ever since. However, rock mechanics is still based to a large extent on analytical techniques that were originally formulated for the mechanical design of structures made from man made materials. The single most important distinction between man-made materials and the natural material rock is that rock contains fractures, of many kinds on many scales; and because the fractures - of whatever kin- represent breaks in the mechanical continuum, they are collectively termed 'discontinuities' . An understanding of the mechanical influence of these discontinuities is essential to all rock engineers. Most of the world is made of rock, and most of the rock near the surface is fractured. The fractures dominate the rock mass geometry, deformation modulus, strength, failure behaviour, permeability, and even the local magnitudes and directions of the in situ stress field. Clearly, an understanding of the presence and mechanics of the discontinuities, both singly and in the rock mass context, is therefore of paramount importance to civil, mining and petroleum engineers. Bearing this in mind, it is surprising that until now there has been no book dedicated specifically to the subject of discontinuity analysis in rock engineering.

Engineering in Rock Masses is a 26-chapter text that deals with the behavior, investigation, and construction of rock masses. The first chapters review the properties, behavior, classification, and occurrence of groundwater in rock masses. The subsequent chapters discuss the stress analysis, exploration, laboratory testing, geophysical methods, and instrumentation in these materials. These topics are followed by discussions of slope stability, rockfall problems, settlement and bearing capacity, subsidence, and seismic movements of rocks and rock masses. This work also evaluates the role of pumping system, ground freezing, grouting, rock anchors, drilling, blasting, and open excavation. The remaining chapters look into the rock masses’ tunneling, underground chambers, shafts, socketed foundations, and retaining structures. This book will be of great value to practicing civil and mining engineers, engineering geologists, and researchers.

Rock Mechanics and Rock Engineering: From the Past to the Future contains the contributions presented at EUROCK2016, the 2016 International Symposium of the International Society for Rock Mechanics (ISRM 2016, Ürgüp, Cappadocia Region, Turkey, 29-31 August 2016). The contributions cover almost all aspects of rock mechanics and rock engineering from theories to engineering practices, emphasizing the future direction of rock engineering technologies. The 204 accepted papers and eight keynote papers, are grouped into several main sections: - Fundamental rock mechanics - Rock properties and experimental rock mechanics - Analytical and numerical methods in rock engineering - Stability of slopes in civil and mining engineering - Design methodologies and analysis - Rock dynamics, rock mechanics and rock engineering at historical sites and monuments - Underground excavations in civil and mining engineering - Coupled processes in rock mass for underground storage and waste disposal - Rock mass characterization - Petroleum geomechanics - Carbon dioxide sequestration - Instrumentation-monitoring in rock engineering and back analysis - Risk management, and - the 2016 Rocha Medal Lecture and the 2016 Franklin Lecture Rock Mechanics and Rock Engineering: From the Past to the Future will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2016, organized by the Turkish National Society for Rock Mechanics, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

This book focuses on the implementation and application of new concepts and methods to modelling, analysis, building, performance control and repair of structures of and in jointed rock and rock masses. It provides a forum for presentation of new research results and discussion for researchers.

The analysis of crack problems through fracture mechanics has been applied to the study of materials such as glass, metals and ceramics because relatively simple fracture criteria describe the failure of these materials. The increased attention paid to experimental rock fracture mechanics has led to major contributions to the solving of geophysical problems.The text presents a concise treatment of the physics and mathematics of a representative selection of problems from areas such as earthquake mechanics and prediction, hydraulic fracturing, hot dry rock geothermal energy, fault mechanics, and dynamic fragmentation.