This dissertation explored the conversion of lignocellulosic biomass into advanced functional materials and their potential applications. Lignocellulosic biomass represents an as-of-yet underutilized renewable source for not only biofuel production but also functional materials fabrication. This renewable source is a great alternative for fossile fuel based chemicals, which could be one of the solutions to energy crisis. In this work, it was demonstrated a variety of advanced materials including functional carbons, metal and silica nanoparticles could be derived from lignocellulosic biomass. Chapter 1 provided overall reviewed of the lignin structures, productions and its utilizations as plastics, absorbents and carbons, as well as the preparation of nano-structured silver, silica and silicon carbide/nitride from biomass. Chapter 2, 3 and 4 discussed the fabrication of highly porous carbons from isolated lignin, and their applications as electric supercapacitors for energy storage. In chapter 2, ultrafine porous carbon fibers were prepared via electrospinning followed by simultaneous carbonization and activation. Chapter 3 covered the fabrication of supercapacitor based on the porous carbon fibers and the investigation of their electrochemical performances. In chapter 4, porous carbon particulates with layered carbon nano plates structures were produced by simple oven-drying followed by simultaneous carbonization and activation. The effects of heat processing parameters on the resulting carbon structures and their electrochemical properties were discussed in details. Chapter 5 and 6 addressed the preparation of silver nanoparticles using lignin. Chapter 5 reported the synthesis, underlying kinetics and mechanism of monodispersed silver nanospheres with diameter less than 25 nm in aqueous solutions using lignin as dual reducing and capping agents. Chapter 6 covered the preparation of silver nanoparticles on electrospun celluloses ultrafine fibers using lignin as both binding and reducing agents. The efficiency of this synthetic protocol and the properties of resulting particles were examined. Chapter 7 reported the streamlined extraction of lignin/hemicelluloses and silica from rice straw and their subsequent conversion to activated carbon and monodispersed silica particles.

Lignocellulosics: Renewable Feedstock for (Tailored) Functional Materials and Nanotechnology gives a comprehensive overview of recent advances in using lignocellulosic substrates in materials science and nanotechnology. The functionalization and processing of lignocellulosics are described via a number of examples that cover films, gels, sensors, pharmaceutics and energy storage. In addition to the research related to functional cellulose nanomaterials, there has been an increased interest in research on lignin and lignocellulosics. This book explains how utilizing biomaterials as a raw material allows ambitious reconstruction of smart materials that are green and multifunctional. As lignin as a valuable material has gained a lot of attention in the last few years, shifting from purely extraction and fundamental characterization, and now also focusing on the preparation of exciting materials, such as nanoparticles, readers will find this to be a comprehensive resource on the topic. - Provides a detailed description of functional lignocellulosic materials and their properties - Brings together research advances in the areas of chemistry, chemical engineering, physics and materials science - Concentrates on the fundamental properties of lignocellulose - Includes unique coverage of lignin research

Lignin is one of the most abundant plant-derived feedstock on earth and qualifies as a renewable material. However, lignin is widely recognized as waste byproduct of the cellulosic ethanol and pulp and paper industry. How to properly modify lignin and develop it into functional polymers is a huge challenge, but an attractive research topic in both industry and academia.This book brings together leading engineering approaches to address the challenges of lignin valorization. It presents the chemistry and properties of different types of lignin, and explores the cutting-edge approaches of lignin modifications. Unlike any existing texts, this book not only summarizes the traditional ways of using lignin, but also presents various potential applications of lignin materials together with advanced processing techniques.The basis of lignin (its chemistry, types and properties) is described, as are different approaches to modify it. The features of lignin and its copolymers are explored and aligned with their potential applications. In addition to the carbon materials from lignin, the advanced fabrication approaches to engineer lignin-based micro/nano-structural materials are summarized.

This book presents a collection of studies on state-of-art techniques developed specifically for lignocellulose component derivation, and for the production of functional materials, composite polymers, carbonaceous biocatalysts, and pellets from lignocellulosic biomass, with an emphasis on using sustainable chemistry and engineering to develop innovative materials and fuels for practical application. Technological strategies for the physical processing or biological conversion of biomass for material production are also presented. All chapters were contributed by respected experts in the field from around the globe, providing a broad range of perspectives on cutting-edge applications. The book offers an ideal reference guide for academic researchers and industrial engineers in the fields of natural renewable materials, biorefinery of lignocellulose, biofuels and environmental engineering. It can also be used as a comprehensive reference source for university students in chemical engineering, material science and environmental engineering.

Lignin-based Materials for Biomedical Applications: Preparation, Characterization, and Implementation explores the emerging area of lignin-based materials as a platform for advanced biomedical applications, guiding the reader from source through to implementation. The first part of the book introduces the basics of lignin, including extraction methods, chemical modifications, structure and composition, and properties that make lignin suitable for biomedical applications. In addition, structural characterization techniques are described in detail. The next chapters focus on the preparation of lignin-based materials for biomedical applications, presenting methodologies for lignin-based nanoparticles, hydrogels, aerogels, and nanofibers, and providing in-depth coverage of lignin-based materials with specific properties—including antioxidant properties, UV absorbing capability, antimicrobial properties, and colloidal particles with tailored properties—and applications, such as drug and gene delivery, and tissue engineering. Finally, future perspectives and possible new applications are considered. This is an essential reference for all those with an interest in lignin-based materials and their biomedical applications, including researchers and advanced students across bio-based polymers, polymer science, polymer chemistry, biomaterials, nanotechnology, materials science and engineering, drug delivery, and biomedical engineering, as well as industrial R&D and scientists involved with bio-based polymers, specifically for biomedical applications. - Unlocks the potential of lignin-based materials with advanced properties for cutting-edge applications in areas such as drug delivery, gene delivery and tissue engineering - Presents state-of-the-art methodologies used in the development of lignin-based nanoparticles, hydrogels, aerogels and nanofibers - Explains the fundamentals of lignin, including structure and composition, extraction and isolation methods, types and properties, chemical modifications, and characterization techniques

Lignocellulose is the only renewable carbon source that can help replace oil-based chemicals and materials, in the process fighting global warming. However, because of its chemical and structural complexity, lignocellulose transformation into advanced products requires a better understanding of its composition and of its architecture at different scales, as well as a combination of physical, biological, and chemical processes, in order to render this transformation efficient and economically competitive. Tremendous efforts continue to be made toward the production of ethanol as a biofuel from various lignocellulosic feedstocks. Furthermore, recent successes have been achieved in extracting fibers to prepare composite materials that can compete with plastic fabrics. Importantly, lignocellulose chemistry can bring to the market original and complex chemicals that can lead to new applications, in particular when exploiting aromatic molecules or oligosaccharides from lignocellulose to produce solvents, surfactants, plasticizers, functional additives for food/feed/cosmetics, drugs, monomers, and polymers. In addition to this broad range of molecular products, fibers and particles fractionated from the lignocellulosic biomass are increasingly used to elaborate bio-based composite materials.

This book systematically introduces the fundamentals, preparation technology, state-of-the-art applications, and future development of biomass-derived porous carbon materials. The authors provide a theoretical foundation that demonstrates the microstructure and physicochemical properties of carbon materials. The fabrication methods, including physical activation methods, chemical activation methods, and advances in other new fabrication methods are explicitly described. The book also identifies many potential applications of biomass (especially biomass-derived porous carbon materials), such as supercapacitors, removal of organic pollutants from water, CO2 capture, photocatalytic application, and farmland restoration. The book will be a valuable resource for researchers, scientists, and engineers working in the field of biomass-derived porous carbon materials, carbon resource development, and environmental protection.

This book presents a collection of studies on state-of-art techniques developed specifically for lignocellulose component derivation, and for the production of functional materials, composite polymers, carbonaceous biocatalysts, and pellets from lignocellulosic biomass, with an emphasis on using sustainable chemistry and engineering to develop innovative materials and fuels for practical application. Technological strategies for the physical processing or biological conversion of biomass for material production are also presented. All chapters were contributed by respected experts in the field from around the globe, providing a broad range of perspectives on cutting-edge applications. The book offers an ideal reference guide for academic researchers and industrial engineers in the fields of natural renewable materials, biorefinery of lignocellulose, biofuels and environmental engineering. It can also be used as a comprehensive reference source for university students in chemical engineering, material science and environmental engineering.

This book on advanced functional textiles and polymers will offer a comprehensive view of cutting-edge research in newly discovered areas such as flame retardant textiles, antimicrobial textiles, insect repellent textiles, aroma textiles, medical-textiles, smart textiles, and nano-textiles etc. The second part the book provides innovative fabrication strategies, unique methodologies and overview of latest novel agents employed in the research and development of functional polymers.

Lignocellulosic Fibre and Biomass-Based Composite Materials reviews the development, characterization and applications of composite materials developed from the effective use of lignocellulosic fibre and biomass. The book gathers together a wide spectrum of cutting-edge research on biomass fillers and reinforcements used for the fabrication and synthesis of composites. The book takes a systematic approach, investigating processing, design, characterization and applications of biocomposites, in order to establish their important relationship as a general guideline for end-user applications. Beginning with an introduction to biomass and its composites, a team of leading experts in the field cover rice husk, kenaf, oil palm, alfa and doum fibres, bamboo, cork, and many other materials, considering a range of applications, along with key issues such as performance and sustainability. The groundbreaking research presented opens the door to obtaining advanced material characteristics and significant enhancements in physical, mechanical, and thermal properties. This will be become an extremely useful reference and technical guide for academic and industrial researchers in composite materials, as well as for advanced students and industrialists working in material commercialization. - Gathers together a wide spectrum of research on lignocellulosic fiber and biomass fillers and reinforcements used for the fabrication and synthesis of composites - Presents multidisciplinary work in relation to materials engineering, polymer chemistry and physics, materials processing, organic synthesis and industrial design and applications - Demonstrates systematic approaches and investigations from processing, design, characterization and applications of biocomposites